Best Wavelength Division Multiplexer

20Pcs HEF4051BT SOP-16 HEF4051B SOP16 F4051B 8-Channel Analog multiplexer/demultiplexer

6pcs CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino

• This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
• Use the CD74HC4067 16-channel analog signal switch.
• Analog signal input: C0-C15 16 channels..
• IT can be used the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
• Wide operating temperature range: -55C to 125C.

100PCS CD4053 CD4053B CD4053BE DIP-16 Analog Multiplexer IC

• It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
• The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
• Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
• This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
• Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..

Analog Multiplexer Single 8:1 ñ9 Volt 20 Volt 16-Pin Plastic DIP Tube

• The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
• It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
• Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
• Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
• This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..

Treedix TCA9548A I2C Multiplexer Breakout Board 8 Channel Expansion Board with pi Header for Arduino

• The TCA9548A Breakout board supports communicating with multiple I2C devices with the same address, making it easy to interface with them..
• TCA9548A multiplexer features: bidirectional eight-channel I2C multiplexer, active low reset input.
• The default address of this expander is 0x70, the address can be changed, and can be set within 0x70~0x77..
• In the address of 0x70~0x77, 8 expanders can be cascaded, and each expander can be connected to 8 devices with the same address, so that the same I2C port can be connected to 64 devices with the same address and can be used normally..
• The chip is compatible with 3V and 5V and can be used with any logic level.

Installer CCTV 4CH Video Color Quad Multiplexer with Loopout Remote Control and Free 1 Amp Power Adapter

• The 4Ch Video Color Quad Multiplexer allows several video signals from CCTV security cameras or other analog video devices to be combined and displayed on one monitor. The video processors are also commonly referred to as video mux, CCTV multiplexer, or color quad processor..
• Full screen displays at real-time refresh rate for each channel. Multiple and automatic display by turn mode: 4Ch, 2Ch, Single Channel.
• Camera title, time and date display for easy identification, 4 Channel BNC input and 2 Video BNC outputs.
• Switch between NTSC and PAL system. Picture in Picture show, PIP position switched (top left, top right, bottom left, bottom right corner). High-Resolution Picture show, Adjust individual resolution. High-quality Screen Freeze function..
• Free 1Amp Power Adapter and remote control Included.

OEM Nexperia 74HC4067PW,112, Analog Switch/Analog Multiplexer Single 16:1 24-Pin TSSOP Bulk (100 Items)

• Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
• This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
• The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
• It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
• Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..

Analog Demultiplexer, CD74HC4067 High Speed Analog Multiplexer Two-Way Connection Analog Multiplexer High Speed for Digital and Analog Signals

• Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
• This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
• The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
• Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
• It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..

10 PCS Analog Multiplexer,Breakout Board Module,CD74HC4067 High Speed CMOS 16-Channel Analog Digital Multiplexer Demultiplexer,Suitable for Digital and Analog Signals

• Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
• It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
• This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
• The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
• Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..

U.S Army 26th Infantry Division Yankee Division HAT - Black - Veteran Owned Business

• U.S. ARMY 26th INFANTRY DIVISION YANKEE DIVISION HAT - BLACK - Veteran Owned Business.
• BLACK Cap High Detail and Impact - U.S. ARMY 26th INFANTRY DIVISION YANKEE DIVISION HAT..
• 8 Rows Stitching on Visor and Pro Stitch on Crown 5 panel hat..
• U.S. ARMY 26th INFANTRY DIVISION YANKEE DIVISION HAT - Adjustable Size, BLACK Golf Style..
• HatnPatch Is THE Veteran Owned and Operated Family Business - 2 Generations of Retired Marines - We Ship Your Order Within 24 Hours And Usually The....

AITRIP 12PCS TCA9548A I2C IIC Multiplexer Breakout Board Module 8 Channel Expansion Development Board for Arduino

• The TCA9548A adapter is connected to an I2C device with multiple identical addresses on the same I2C port on the main control board for normal communication and use.There are 8 I2C interfaces on one expander, and there are eight bidirectional transfer switches that can be controlled by I2C bus. This means that after 1 expander is transferred, 8 identical addresses can be connected to the same I2C port..
• Expansion board TCA9548A compatible with IIC bus and system management bus (SMBus), active low reset input, support for hot insertion, low standby current, no glitch during power-up, support for voltages between 1.8V, 2.5V, 3.3V and 5V buses Level shifting, TCA9548A I2C IIC multiplexer breakout board depending on the contents of the programmable control registers, any single SCn/SDn channel or combination of channels can be selected..
• 12pcs TCA9548A I2C IIC Multiplexer Breakout Board 8 Channel Expansion Board for Arduino.

US Army 101st Airborne Division - Unit Patch Insignia Tank Top

• Official GS Military Designs Garment. US Army 101st Airborne Division. Motto: "Rendezvous With Destiny". 101st Airborne Division Patch and colors. The 101st is a light infantry division trained for air assault operations..
• Great gift for any veteran or supporter of the 101st Airborne Division. The 101st was established in 1918. Their current division headquarters are at Fort Campbell, Kentucky..
• Lightweight, Classic fit, Double-needle sleeve and bottom hem.

82nd Airborne Division - Unit Crest Patch Insignia PopSockets PopGrip: Swappable Grip for Phones & Tablets

• Official GS Military Designs Garment. US Army 82nd Airborne Division - "All American Division". 82nd Airborne Division Patch and colors..
• Great gift for an 82nd division veteran or supporter of the 82nd. The 82nd Division was established in 1917 during the first world war. The 82nd is an Airborne light infantry unit. Their current division headquarters are at Fort Bragg, North Carolina..
• switch out your PopTop for another design or remove it completely for wireless charging capabilities. (Not compatible with Apple MagSafe wireless charger or MagSafe wallet.).
• Expandable stand to watch videos, take group photos, FaceTime, and Skype handsfree..
• Advanced adhesive allows you to remove and reposition on most devices and cases..
• Note: Will not stick to some silicone, waterproof, or highly textured cases. Works best with smooth, hard plastic cases. Will adhere to iPhone 11, but not to the iPhone 11 Pro nor the iPhone 11 ProMax without a suitable case..