Categories

Best Wear resistant Carbide

Diablo by Freud D1024X 10\ 24-Tooth ATB Ripping Saw Blade 5/8\ Arbor, Multicolor

  • Tico high-density Carbide for increased performance and maximum cutting life.
  • Perma-shield Non-Stick coating for protection against heat, gumming and corrosion.
  • Super-thin kerf design for fast and effortless cuts.
  • Laser cut Stabilizer vents trap noise and vibration keeping it cool and reducing blade warp.
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight.
  • Durable micro grain titanium carbide for extreme durability, razor-sharp cuts, and long life.
  • Tri-metal shock resistant brazing allows Carbide tips to withstand extreme impact for maximum durability.
  • Laser cut arbor for accurate blade rotation reducing vibration and premature wear.
  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp.
  • Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life.
  • Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability.
Check Stock

DuraMark ChalkShot

  • The tungsten carbide tip is mainly made of metal tungsten and carbon through sintering.The finished tungsten carbide has the characteristics of high hardness and wear resistance..
  • The handle of the tungsten carbide scriber is made of aluminum alloy, so it feels very comfortable to use and achieves a perfect balance in terms of weight. What's more, the handle also has a knurled design, which can provide precise control even if the palm is sweaty..
  • The powerful magnet at the end of the tungsten carbide scriber can help you easily retrieve excess iron filings from the complex engraving patterns..
  • Thanks to the clip in the carbide scribe, you will never lose your scriber again. At the same time, the carbide scribe is also the ideal size for your pocket.
  • Warranty:You would enjoy lifetime warranty from the date of your purchase..
Check Stock

Freud D1244X Diablo 12-Inch 44 Tooth ATB General Purpose Miter Saw Blade with 1-Inch Arbor

  • Laser cut Stabilizer vents trap noise and vibration keeping it cool and reducing blade warp.
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight.
  • Durable micro grain titanium carbide for extreme durability, razor-sharp cuts, and long life.
  • Tri-metal shock resistant brazing allows Carbide tips to withstand extreme impact for maximum durability.
  • Laser cut arbor for accurate blade rotation reducing vibration and premature wear.
  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp.
  • Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life.
  • Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability.
Check Stock

Hard Tungsten Steel Ball, Alloy Steel Ball, Extrusion Ball, YG6 Tungsten Steel Ball, YG8 Alloy Ball, 13.01mm-13.1mm Diameter, 1PCS,13.06mm*1PCS

  • Tungsten steel ball properties: commonly known as cemented carbide balls, carbonized hook balls, refers to balls, balls made of cemented carbide as the material, cemented carbide balls have high hardness, wear resistance, corrosion resistance, bending resistance, use Harsh environment, can replace other material steel ball products.
  • Cemented carbide is mainly composed of carbide (WC. TiC) micron powder of high hardness refractory metal, with cobalt (C"o) or silver (Ni), aluminum (Mo) as binder, in a vacuum furnace. Or powder metallurgy products sintered in hydrogen reduction furnace, commonly used cemented carbide balls.
  • Process flow milling → formulating according to the requirements of the application → wetting → mixing → pulverization → drying → adding molding agent after the festival → drying → the mixture obtained after the festival → granulation → cold isostatic pressing → molding → Sintering → forming (blank) → packaging → storage.
  • Hook steel ball has a wide range of applications, such as: precision bearings, instruments, meters, pens, spraying machines, water mulberries, mechanical accessories, sealing cabinets, pump making, punching holes, oil fields, hydrochloric acid laboratories, hardness measuring instruments, ....
Check Stock

Diablo D1260CF 12-inch Steel Demon 60T Cermet II Carbide Ferrous Metal Saw Blade

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).
Check Stock

Woodys Dooly Carbide Wear Rods - 6in. DY6-6580

  • Dooly wear bars create four parallel traction lines for dramatically decreased darting and enhanced handling.
  • Each wear rod features two 7/16in. runners with center carbide.
  • 6in. and 8in. carbide carry 60 degree carbide.
  • Hardweld at front of wear rod and 1.5in. carbide pad at the back.
  • Durable 3/8in. - 16 mounting studs ensure secure fit.
Check Stock

OSCARBIDE Carbide Inserts TPG322 Turning Inserts TPGN160308,Tin Coated for Lathes and Mills,10 Pieces/Box.

  • Indexable Carbide Milling Insert 1/8" Thick, 1/32" Radius,11 degree relief angle..
  • Carbide Cutters material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
  • Carbide Bits for turning and milling carbon and alloy steels, tools steel and stainless steel.
  • Screw on triangle style insert with a chip breake.
  • 10 pieces per box, provides longer tool life than uncoated grades.
Check Stock

5PCS 1/2' Carbide Square End Mill Bits Set, Milling Bits Cutter 1/2 Carbide End Mills for Alloy Steels/Hardened Steels, HRC 45 Deg Single End 4 Flute AlTiN Coating

  • Package Included: 5pcs 1/2" carbide square end Mill.
  • Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel..
  • Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance..
  • HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron..
  • Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining..
Check Stock

Diablo D1024X 10-Inch 24-Tooth ATB Ripping Saw Blades Bundle (2-Pack)

  • ...e cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo′s unique design, extra-tough steel plate and proprietary carbide tips deliver longer life — and frames more houses — than other framing blades.
  • Ideal Usage: For a fast-acting blade that produces clean rip-cuts in a variety of framing material, look no further than the Freud D1024X Diablo 10-Inch Ripping Saw Blade. Ideal for most general-construction applications, this is your go-to blade for slicing through rough framing lumber, high-quality finish lumber, plywood, OSB (oriented strand board), and hardboard siding.
  • Fits Table Saws: The Diablo D1024X is a great addition to your workshop because it's designed with the versatility to fit a variety of table saws.
  • Features Shock-Resistant Carbide: The Blade features shock-resistant carbide for long-lasting precision, so you can count on it over the long term, as it is designed for durability. The blade's hardy....
Check Stock

THREE KEYS JEWELRY 8mm Tungsten Rings Silver Punk Seal Gear Mechanical Light Blue Carbon Fiber with Metal Foil Inlay Wedding Bands for Men Size 10

  • High Quality Tungsten Carbide Steel: Strong hardness and wear resistance, insoluble in water, sulfuric acid. Resists normal day activities.
  • Ideal Gifts for Love: Idea wedding Band, engagement ring or Promise Fashion Rings for men, women. Best gifts for him, husband, dad, boyfriend & gift....
  • Comes with Elegant Ring Box. Ideal Gift for Father's Day, Christmas, Birthday, Anniversary, Wedding, Engagement, or Valentine's Day Gift.
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

uxcell Spotting Drill Bits 5mm Dia 5mm Shank 60 Degree Solid Carbide AlTiSin Coated 2 Flutes Round Shank Drilling Cutter

  • Spotting Drill Bits: Cutting Edge Diameter: 5mm / 0.2".
  • Total Length : 50mm / 2.0". Large spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip..
  • Wide Applications: Widely used for drilling steel below HRC60, such as stainless steel, carbon steel, die steel, alloy steel. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability..
  • Carbide Tool: Made of fine-grained tungsten carbide, the drill bit has good toughness, high hardness (HRC92), wear resistance and heat resistance. With good cutting strength and drilling effect, carbide tool offers long tool life and faster cutting speeds than other substrates..
  • Easy to Use: Universal chamfered round shank, easier clamping, stable cutting process. Suitable for CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better..
  • Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance..
Check Stock

7 Piece Masonry Drill Bit Set for Tile Brick Cement Concrete Glass Plastic Cinder Block Wood [3/16，1/4，5/16，3/8，1/2 inch ] Chrome Plated with Industrial-Strength Carbide Bit with Storage Box

  • 【Industrial grade material】Made of selected high-quality high-strength alloy steel materials. Compared with ordinary Masonry Drill Bits on the market, it has higher hardness and wear resistance, and has lower cutting resistance. The well-designed high-hardness carbide tip can easily penetrate various materials. Cemented carbide drill bit is used as a material to improve durability..
  • 【Sturdy and durable】 Durable industrial-grade cemented carbide blades and cemented carbide with reinforced heads can prevent the drill from cracking and prolong its service life. Compared with traditional brick drill bits, its strength and sharpness are higher. Anti-rust, smoother drilling and cutting removal, higher hardness and wear resistance. The additional triangular handle can firmly fix the electric drill in the electric drill..
  • 【Wide range of applications】 The tough carbide tip of the pointed design can easily penetrate various materials, and can quickly penetrate and remove debris. Suitable for cement, concrete, ceramic tiles, drill blocks, glass, wood, cinder blocks, travertine, hard plastics, mirrors, etc.! The masonry Drill Bit Set includes 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch to meet the various requirements of home drilling.
Check Stock