Categories

Best Weave Boards

AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick 2.0mm/2.5mm/3.0mm Width 1.5m Length with Flux - Desoldering Vacuum Pump Solder Removal Tool

  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand.
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size.
  • geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs.
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable.
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering.
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size.
Check Stock

Hyperice X Knee - Portable Contrast Therapy Device Seamlessly Switches Between Hot and Cold Therapy in Seconds

  • ...d the Thrashers to your cornhole sets and start tasting sweet victory..
  • FEWER MISTAKES: The Trasher bags have tacky weave fabric, which means the overall speed of the bag is slower than many cornhole bean bags allowing you to avoid costly errors and the bags flying off the boards in tight games..
  • USA MADE FOR PLAYERS BY PLAYERS: As cornhole players ourselves, we have seen the evolution of the game over the last 10 years and have seen the need for evolution in bags and boards. Even though we choose higher level fabrics and fill, we still go the extra mile to keep prices reasonable and quality at a premium..
Check Stock

Ronix Bimini Top - 4pc Surf Board Rack, Heather Grey / Orange

  • The Bimini Board Case – Bimini top 4pc surfboard rack. Do not exceed 20 mph.
  • Features – Holds 4 boards in individual sleeves, 4 Fin pockets, 2 per side, Includes 8 adjustable webbing straps to anchor to your Bimini frame.
  • Since creating our first wakeboard in 1990, Ronix has immersed itself with the pursuit of perfection, whether it’s sourcing new memory foam in footwear, or a weave of glass better than anything Massi has ever experienced off the wake. We are a non-venting venture of artists, engineers, and riders making riding devices collectively crafted for the imagination of wakeboarding. Our axiom will always be based on products and tales of tomorrow’s riding..
Check Stock

Stretch SUP Board Sock Cover for Paddle Boards - size 8'2 to 12'6 [CHOOSE COLOR] (Blue White Stripe, 9'6 Round)

  • quality thick & hard wearing weave protects your board from sunlight, scratches, dirt and dings.
  • super stretchy fabric will accommodate boards up to 34".
  • 600D reinforced Fish or Round shape nose protector & drawstring barrel lock tail closure will fit your fin.
  • SUP sizes available in 8'2 Fish, 8'8 Fish, 9'2 Fish, 9'6 Round, 10'6 Round, 11'6 Round, 12'6 Round.
  • Black, Blue, Navy or Blue Stripe color options while in stock. 12 month Curve warranty applies..
Check Stock

TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively..
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas..
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time..
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards..
Check Stock

GWENT Cards Board / Decks Play Mat, 24' x 24' Canvas Playing Surface with UV Ink Printing

  • This Gwent Mat is printed on a sturdy tight-weave canvas, with a *glossy* finish..
  • The playing surface (24" x 24") is sized for Bridge cards only (Poker and Tarot size will NOT fit properly)..
  • These canvas mats are wonderful to play on and won't scratch up your table like smaller wooden boards or bunch up like lightweight fabric prints..
  • The playing surface is designed to look like red-cherry playing board. The cards/jewels pictured are NOT included..
  • The playing surface is fairly durable and may be gently cleaned with a soft, slightly damp towel. Always roll the mat, rough handling or folding/creasing will damage the mat. When you're done with your game just roll it back up and store it in the shipping tube..
Check Stock

Lesnow solder wick Braid With Flux 3mm/0.12" Width 10' Length, No-Clean Desoldering Wick Braid Remover tool, Soldering Wick Disassemble Electrical Components,copper desolder wick Braid

  • The braided solder wicks are suitable for labs, home and industry welding work,can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • This desoldering wick has geometrically-precise weave with copper wires with nice quality and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.12 inch in width, enough quantity and length for your daily needs.
  • If you are using the solder wick for the first time, it is recommended to use a multi-point flux to assist in cleaning，At the same time, in order to prevent burns, do not directly touch the solder core at close range during use..
  • If for any reason you are not 100% satisfied with lesnow solder cores, we sup....
Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

  • ...elicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • ( Widely used Solder Remover ) The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more..
Check Stock

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

  • ...r electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more..
Check Stock

Shark Wheel Joker - Downhill Longboard with 70MM, 78A Green DNA Shark Wheels

  • MADE BY SKATERS All of our boards are designed by skaters and inspired by our location in Southern California, the birthplace of longboarding. Many of our design cues come from the local surf culture and natural materials, we let the simple aesthetics shine on their own. We also prioritize our customer service and want you to be completely stoked with your new board. All messages are replied to within 24 hours and we’ll do our very best to ensure satisfaction and maximum cruising on our boards..
  • DESIGNED FOR HIGH SPEED The recessed truck mounts are designed to be parallel to the ground plane which ensures you retain the turning performance of your trucks because if the kingpin angle gets too high turning becomes extremely sensitive and creates instabilities at high speeds. The W-concavity, with 2 "channels" running along the length of the deck, also stabilizes the board at high speeds and when bombing hills..
  • HIGH QUALITY MATERIALS The Carbon Fiber Downhill board sets itself apart with the high quality materials used in the composite layup. The deck is made with a 3K carbon fiber weave, Canadian Maple and fiberglass which results in an extremely efficien....
Check Stock

ForPro Professional Collection Sanding Sponge Board, Orange 100/Blue 180 Grit, Double-Sided Manicure & Pedicure Nail Buffer, 7” L X 1.15” W, 12-Count

  • Sponge Nail Boards: ForPro Sponge Boards are made from the finest sanding foam. These double-sided reusable nail boards are a necessary addition to your manicure accessories.
  • Double-Sided Nail Boards: The nail boards feature grits on either side, giving you a choice of Orange 100 grit nail board and Blue 180 grit nail board.
  • Nail Care: These reusable sponge boards are specially designed for your convenience, hygiene, and quality. The sponge boards are perfect for removing excess product leftover from your gel and acrylic nails.
  • Washable Nail Boards: These washable and sanitizable sponge boards feature ultimate flex for reaching all areas of acrylic as well as natural nails.
  • Size and Other Details: The sponge boards measure 7” L x 1.15” W. Each package contains 12 washable nail boards.
Check Stock

Quartet Cubicle Partition Hangers, Fits 1.5\ – 2.5\ Cube Walls, Matrix, Black (MCH10)

  • fits cube walls frame 1.5" – 2.5" thick.
  • metal hangers provide secure hold for boards.
  • hangers come in a set of 2, black in color.
  • Compatible for use with the following aluminum frame whiteboards and bulletin boards: Quartet Matrix whiteboards, InView whiteboards, Standard and Classic series porcelain and melamine whiteboards, and Educational porcelain whiteboards.
  • Prestige Plus porcelain whiteboards, Prestige Total Erase whiteboards, and Prestige Euro Total Erase whiteboards, Quartet Matrix fabric bulletin boards, and Standard and Classic series cork bulletin boards.
  • Prestige Plus magnetic fabric bulletin boards, Prestige embossed foam bulletin boards, and Prestige fabric bulletin boards.
  • Also compatible with aluminum frame Prestige combination boards.
Check Stock

12 Pieces Wood Canvas Boards Unfinished Wooden Panel Boards Wood Paint Pouring Panels for Painting Drawing Home Decor, 3 Sizes

  • What will you receive: the package comes with 12 pieces of wood canvas boards in 3 different sizes, enough for your daily use and you can also share these boards with your family and friends.
  • Size information: these unfinished wooden panel boards have different sizes for you to choose, 5 pieces of boards measure approx. 15 x 15 cm/ 6 x 6 inches, 4 pieces of boards measure approx. 12 x 12 cm/ 4.7 x 4.7 inches, and 3 pieces of boards measure approx. 23 x 19 cm/ 9 x 7.5 inches.
  • Serviceable material: made of quality wood, these wood paint pouring panels are smooth for you to touch, no burrs or wood chips, not easy to break, light in weight, you can feel at ease using them for a long time.
  • Quality unfinished boards: there are no creases or wrinkles on the boards, making it possible for you to apply oil, acrylic, watercolor and more on these unfinished wooden panel boards to create your favorite paintings.
  • Wide applications: these wood canvas boards are suitable for oil painting, photo collages, home decoration and more, these boards can be nice choices to decorate your rooms, parties, offices and more to make your room more attractive.
Check Stock