Categories

Best Weight For Pinewood Derby

2.5 Ounce Incremental Car Canopy Weights Tungsten Weight Compatible with Pinewood Car Derby Weights

  • Size: derby canopy weight's top is 1-1/2 inch in length, 1-1/16 inch in width, 1/4 inch tall.
  • Make precise placement of weight in your car for adding....
  • Feature of tungsten canopy weight: the density of tungsten is higher than other metals, which allows you to pack more weight in your car and gives....
  • Application: tungsten weight top is rounded, bottom is 3/8 inch diameter cylinder stud and 1/4 inch tall.
  • Use standard 3/8 inch drill bit to drill the....
  • Material and quantity: package includes 1 piece 2.5 ounce canopy shaped tungsten weight for pinewood car derby.
  • Simple assembly: canopy weight bottom is 3/8 inch diameter cylinder stud (standard drill bit size), this cylinder part will easily slide into your....
Check Stock

Maximum Velocity Pine Derby Car Tool | Derby Car Center of Gravity Stand | Accurately & Easily Measure COG for Pinewood Car Kits

  • FORGET THE PENCIL & RULER - Use our Center Of Gravity (COG) Stand to accurately measure and adjust the balance point of your pinewood car (COG tool only, car is not included)..
  • VALUABLE DERBY CAR TOOL - The built in ruler simplifies the process of finding the exact balance point of your derby car. This is a key building component of your pinewood car build (COG tool only, car is not included)..
  • QUICK ASSEMBLY - Snap in a few parts and you are ready to find the center of gravity for your derby car. Easy to follow instructions included (COG tool only, car is not included)..
  • HERE TO HELP - Maximum Velocity has been serving the Pine Derby community for 20 years. All our products are tested and proven to help you reach Maximum Velocity!.
Check Stock

Pine Derby Drilled Car Kit with PRO Graphite and 3oz Flexible Cuttable Stick-On Tape Weight by Pinewood Pro

  • All necessary tools and supplies included with instruction sheet.
  • Derby car kit with Official parts precision tuned for speed..
  • 3oz Flex Weight which is easily cut with scissors and has a 3M adhesive side to easily stick to the car block.
  • Official Speed Wheels lathed by Pinewood Pro, lightly lathed and precision tuned so your car starts fast and reaches maximum speed.
  • Official axles polished and deburred by Pinewood Pro, minimizes friction so your car is fast..
Check Stock

Pinewood Pro Derby Car Wheel Bore Polishing Kit with Novus Plastic Polish #2

  • INCREASES YOUR DERBY CAR SPEED by reducing critical wheel-axle friction where wheel spins on axles.
  • Special PLASTIC POLISH removes imperfections in Derby Car Wheel Bore to increase car speed..
  • Includes perfectly sized cotton spears that fit in derby wheel bore.
  • Reduce bore friction further after polishing with PRO Graphite.
  • Works on all types of derby wheels including BSA, Awana, Pine Car, Pinewood Pro's PRO wheels, etc..
Check Stock

Bent 1.5 Degree Pine Derby Axle with Easy Turn Screw Driver Slot – Polished Nickel Plated PRO Grooved Steering Axle 1 Axle

  • One single 1.5 degree pre bent pinewood derby polished axle to adjust pinewood derby car steering.
  • Convenient Easy Turn screw driver slot cut in the head to easily turn the axle without damaging it.
  • Exclusive nickel plated finish minimizes friction so your car is super fast.
  • Angled underside of axle head minimizes wheel/axle contact area.
  • Two grooves - Reduces friction and wheel wobble while providing a graphite store.
Check Stock

3oz Tungsten Putty Weights, Colorful Incremental Tungsten Weight for Pinewood Derby Car and Fly Fishing Sinker(6pcs- 0.5oz Each)

  • Strong Plasticity: The tungsten putty is hard to harden. It will gradually soften as the temperature increases. Just like plasticine, the tungsten putty weight can be kneaded into any shape you want. It would be a perfect choice for pinewood derby racers and fishing enthusiasts..
  • This tungsten putty weights kit contains 6 pieces of 0.5oz individually packaged incremental putty, which includes 3 colors, to help you adjust the weight of your derby or Awana Grand Prix race car quickly and precisely as needed..
  • Unique Performance: The tungsten putty weights is made of high-quality tungsten powder and high molecular polymer, which is 1.8 times higher than lead density.Equal weight is smaller to create more potential energy.In addition, tungsten fishing weights also has well viscosity and hydrophobicity, which makes tungsten putty a perfect substitute for fishing sinker products as a counterweight for fishing hook diving..
  • Safe Material: These tungsten putty weights steels are processed safely with non-toxic and environmentally friendly. It is safe even for children to operate..
  • Easy to Use:It is used widely in various fields because of its sticky characteristics. When used with a pine wood car, you don't need to drill holes in a derby car. When used with fish....
Check Stock

Pinewood Derby Weights Tungsten 3.25oz. Pinecar Power with Varied Sizes of Incremental Cylinders. Heavy with No Lead. by Rocket Box

  • Winners of Pinewood Derby competitions use Tungsten weights. It’s 1.7x heavier than lead which allows you to pack more weight in the back of your car. This causes a greater build up of potential energy and have faster speeds on the track and finish line..
  • EXTRA 3.25 oz instead of 3.0 oz. Incremental sizes offer a more precise weight distribution. (5 half ounce, 2 quarter ounce, and 2 eighth ounce weights) Give your derby car more weight in the back for more speed. It may be the difference of 1st place and 2nd..
  • The cylinders are 3/8″ diameter which is a standard drill bit size. Simply drill a hole, insert weights and glue in place..
  • NO SHARP EDGES! NO LEAD! These weights are beveled, non-toxic and child safe for handling..
  • Surprisingly Heavy! Tungsten weights have huge advantages in pinecar racing..
Check Stock

Pine Derby Car BSA Speed Wheels and Axles Kit | Professionally Lathed | Pinewood Car Wheels

  • PROFESSIONALLY LATHED BSA WHEELS - Wheels lathed on state of the art CNC lathe. Tread surface trued to center of wheel bore. Inner tread edge cut with a radius square to center of wheel bore..
  • MATCHED MOLD NUMBERS - All wheels have matched mold numbers ensuring that the bore diameter and other wheel measurements are identical, maximizing performance. Wheels are ready to race as is, but can be polished up for maximum performance..
  • SPEED AXLES - Not your standard BSA out of the pinewood car kit axles. Accurate, round shaft to improve performance..
  • LESS WORK FOR YOU - No burrs and crimp marks, eliminating tedious work. Also creates a faster more consistent derby car. Axles are ready to race as is, but can be polished for greater performance..
  • MADE IN THE USA - Maximum Velocity has proudly serving the Pinewood Derby community for 20+ years!! We are here to help!!.
Check Stock

Dr.Fish Tungsten Putty, 1-1/20oz, Fishing Tungsten Weight, Derby Car Weight, Reusable High Adhesion Easy Attach Weight Fly Fishing Fishing Lure Sinker Texas Rig, Dropshot Rig

  • High Quality Tungsten: Made with high quality tungsten powder with polymer binding..
  • Easy to Shape: This tungsten putty will soften by body heat when your finger touches it. Can be shape to whatever you like repeatedly..
  • Weight Adjusting: Can be used in fishing by pinching off what you need and attach it to your fishing weight, fishing line or fishing hook .It will become hard when it touches water so you can use it over and over. And this is a must-have for pinewood derby cars to reach the fastest speed..
  • Enviornmental: Tungsten have a smaller volume and no toxicity compared to lead. A much safer material to use in fishing or derby cars..
  • Weight: 1-1/20oz per pack. Comes in a small Aluminum box. Quantity: 2 Packs.
Check Stock

Maximum Velocity Derby Car Kits | Bulk Pack (12) | Pine Block Kits Includes Wheels & Axles | Pinewood Car Kits

  • FANTASTIC DERBY CAR KIT - Highest quality out of the box wheels and axles for derby car kit. Don’t worry about filing off flaws, or losing hub caps. Our axles have no burrs or crimp marks, and install without hub caps. You can use them as-is, or lightly polish them with a metal polish..
  • PREMIUM BLOCKS - Our derby car kit blocks are soft, kiln-dried, northwestern pine blocks, cut precisely to 7 inches long, 1-3/4 inches wide. Accurately duplicating the dimensions of the BSA pinewood block..
  • HERE TO HELP - Maximum Velocity has been serving the Pine Derby community for 20 years. All our products are tested and proven to help you reach Maximum Velocity!.
Check Stock

Pinewood Pro Pine Derby Complete Car Kit with PRO Graphite - Pre-Weighted, Pre-Drilled and Primed Ready for Paint -The Lazer

  • FREE PRO Axle Guide and Wheel Spacer from Pinewood Pro. $17 Value!.
  • Complete pine derby car kit with Official parts precision tuned for speed!.
  • Official car block, pre-weighted, drilled and primed. Weights set for optimal center of gravity for maximum speed.
  • Official Speed Wheels from Pinewood Pro, lightly lathed and precision tuned so your car starts fast and reaches maximum speed.
  • Official polished axles from Pinewood Pro, deburred and polished to minimize friction.
Check Stock

Metal Magery Lead Shot Balls #7.5 2lb Bag of 7 1/2 Lead Shot BBS for Reloading and Adding Weight

  • Add Weight to Projects: These small lead metal balls are perfect for adding weight to a multitude of hobby projects. Perfect way to add weight to trains railroad cars and locomotives, pinewood downhill derby cars, clocks and any other projects that require added weight. The small size of the shot helps fill small and oddly shaped locations..
  • High Quality Lead: Magnum lead shot is harder and slightly less dense than chilled lead shot. Containing 3-5% antimony, Metal Magery Lead Shot will retain its spherical shape..
  • Cleaning Items: Good for cleaning rust or dirt off items. Drop into a container with the items you want to clean and shake the container until the items are clean..
  • Reduce Vibration: Perfect for reducing vibration in Motorcycle handlebars..
  • Dimensions: 2lb Bag | Material: Graphite Coated High Antimony Magnum Lead(American Standard).
Check Stock

Pinewood Pro Derby Car Machined PRO Polished Speed Axles, Nickel-Plated with 2 Grooves and Angled Head minimizes Friction to get The Fastest axle (4 axles)

  • PRO SUPER SPEED machined axles, perfectly straight. Designed for SPEED. For use on pinewood derby cars..
  • NICKEL PLATED with a mirror finish makes the fastest derby car axles.
  • GROOVED AXLES 2 grooves reduces friction and wheel wobble with secret graphite store for a super fast axle.
  • ANGLED HEAD reduced friction when wheel touches head.
  • OVER SIZED SHAFT at 0.91" for a tighter fit in the wheel bore reduces wheel wobble.
Check Stock