Categories

Best Weld Joint

Parker Weld-Lok 6-1 AW2-SS Stainless Steel 316 Tube Socket to Butt Weld Tube Fitting, Adapter, 3/8\ Tube OD x 1\ Pipe Size, 0.95\ Bore

  • Careful welding procedures are normally followed to assure that this root area is included in the weld.
  • The joint will have two builtin stress risers which may greatly reduce the strength of the weld.
Check Stock

Parker Weld-Lok 8-3/4 AW2-SS Stainless Steel 316 Tube Socket to Butt Weld Tube Fitting, Adapter, 1/2\ Tube OD x 3/4\ Pipe Size, 0.73\ Bore

  • Careful welding procedures are normally followed to assure that this root area is included in the weld.
  • The joint will have two builtin stress risers which may greatly reduce the strength of the weld.
Check Stock

uxcell Round Weld Nuts, M10 x 14mm x 13mm Weld On Bung Female Nut Threaded - 201 Stainless Steel Insert Weldable 4pcs

  • 【HIGH QUALITY】-All the weld nuts are made of high quality carbon steel, have high hardness, perfect wear and rust resistance, smooth surface without burr..
  • 【ADVANTAGE】-Flat solder joints, high-quality steel ,good weld ability, thread size accuracy..
  • 【SIMPLE TO USE】-First, clean the welding surface, using sandpaper or steel brush to remove the joint oxide.
  • Second, welding a little bit and adjust the verticality of the thread.
  • 【MULTI APPLICATION】-Used for pipe furniture, tables and chairs, shelves, vehicles, trolley casters and other threaded connection..
Check Stock

P-Trap with Solvent Weld Joint, 2 In

  • Price For: Each Standards: Cell Class 12454, ASTM D1784 Max. Temp.: 140 Degrees F Item: P-Trap with Solvent Weld Joint Body Material: PVC Color: White Fittings Sub-Category: Traps Schedule: DWV Connection Type: Hub Pipe Size: 2″ Country of Origin (subject to change): United States.
Check Stock

Harris S0FB01Type B Solar Welding Flux 1 lb Can

  • Designed to shield the back of the weld joint from oxygen.
  • Item Package Dimension: 3.38" L x 3.38" W x 4.0" H.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

High-Performance Handling for Street or Track: Vehicle dynamics, suspension mods & setup - Anti-roll bars, camber adjusters & chassis braces - High-performance driving techniques (Motorbooks Workshop)

  • Universal Application: Parallel 4 link suspension kit fit for Hot Rod Rat Rod Trucks Classic Cars.
  • Improve Ride Quality: 4 Link kit provides a safe and quality ride with improved handling and cornering performance.
  • Reinforced Steel Bars: Heavy-duty steel bars have carbon steel heim joint rod ends, construct a sturdy and durable suspension link system for your vehicle.
  • Complete 4 Link Kit: 5 Steel bars, 4 weld-on axle mounts, 4 weld-on fame mounts, 4 panhard brackets, 10 hex head bolts with nuts, and 10 heim joints (M16*1.5mm) 5/8".
  • Dimensions: Link bars are 24" long, tube outside diameter is 1.25" with 0.157" wall thickness. No instructions included, message us if you have any questions.
Check Stock

RapidFix Dual Adhesive System 25 mL

  • RapidFix Dual Adhesive System produces high strength bonds in seconds and is an ideal solution for emergency automotive repairs.
  • RapidFix can bond to rubber, metal, plastics, copper, aluminum, steel and most plastics.
  • RapidFix welding powder is used in conjunction with the adhesive to produce a high strength bond in seconds.
  • Use to repair all types of holes, cracks and gaps by creating a strong weld seam that is as supportive as solder or a welded joint.
  • RapidFix adhesive dries clear and bonds most material instantly and can be painted or stained.
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

RapidFix - 5121700ES Dual Adhesive System 5 mL

  • RapidFix Dual Adhesive System produces high strength bonds in seconds and is an ideal solution for emergency automotive repairs.
  • RapidFix can bond to rubber, metal, plastics, copper, aluminum, steel and most plastics.
  • RapidFix welding powder is used in conjunction with the adhesive to produce a high strength bond in seconds.
  • Use to repair all types of holes, cracks and gaps by creating a strong weld seam that is as supportive as solder or a welded joint.
  • RapidFix adhesive dries clear and bonds most material instantly and can be painted or stained.
Check Stock

Lifetime 71281 In Ground Power Lift Basketball System 52 Inch Shatterproof Backboard

  • 52" Steel Framed Shatterproof backboard is constructed with a polycarbonate surface for strength and durability.
  • Features Power Lift height adjustment mechanism.
  • 3 Piece 3.5" round pole features a friction-weld joint that safeguards against unwanted movement.
  • Backed by a 5-year limited manufacturer warranty. Adjust the height of the backboard with just a squeeze of the handle.
  • UV protection and powder-coated steel. Weather resistance to discoloration and rusting.
Check Stock