Categories

Best Weld on Adapter

TOPTOW 64454 Trailer Hitch Receiver Tube 2-inch X 9-inch Length Storage Box Combo Bar, Weld on Raw Steel

  • ★Receiver Size: This trailer hitch receiver tube has 2 inch by 2 inch opening.
  • ★The weld-on hitch receiver is with 9 inch of total length. Make sure you need this length of hitch box before purchasing it..
  • ★The tow hitch receiver tube is ready to Weld, with Raw Steel Finish.
  • ★The weld-on trailer hitch tube is with 5/8 Inch Pre-drilled Hitch Pin Hole.
  • ★This receiver hitch adapter can be used for custom welding project.
Check Stock

Welding Basics: An Introduction to Practical & Ornamental Welding

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

Titan Attachments Bucket Teeth Assembly 23TF Set of 5 Medium Wear Weld On Shank

  • OEM quality heat treated and tempered steel Medium wear teeth.
  • Tooth Part #: 23TF Adapter Part #: 274023 Flex Pin Part #: 23TFP.
  • Set of 5 teeth Weld On Shank adapter Tooth Length: 5.9".
  • Adapter length: 8.6" Total Assembly length: 12" Tooth width: 2.9".
  • Inside Width of Tooth Pocket: 1.6" Flex pin dimensions: 2.15" x .7" x .4" Weight: 37.5 LBS.
Check Stock

SereneLife MIG Welder Flux Core Welding Machine with Gas and No Gas, 130A DC 110V 220v IGBT Inverter Welder with Automatic Wire Feed, Welding Gun, Ground Wire, Brush, Mask, Dual Voltage Adapter

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

Forney Easy Weld 261, 140 FC-i Welder, 120V, Green

  • ... Lightweight 19 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project.
  • RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire.
  • WELDER INCLUDES- 8' MIG gun, 8' ground clamp, Integrated handle with torch wrap and a 20A-15A adapter. Backed by a 12-month warranty.
  • PRODUCT SPECIFICATIONS- Dimensions: 16.75" (425.45 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters), Weight: 19 lbs. (8.62 kilograms), Gasless/flux-core welding only, Portable, Torch wrap, Infinite voltage and wire feed speed control, 120-volt input, 140 AMP output, Welds up to 1/4 in. (6.35 millimeters), Handles .030 in. or 0.35 in. wire, Includes: 8' MIG gun, 8' ground clamp and 20A - 15A adapter, Duty Cycle 30% @ 90A.
  • RECOMMENDED ACCESSORIES- Contact Tips (60170, 60171 and 60172),Welding Nozzles: (85336 and 85337), Diffuser: (85339), Flux Core MIG Wire: (42300 and 42301), Anti-Spatter Spray: (37030), Nozzle Gel: (37031).
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock

Weld On Grab Chain Hook G70 3/8\ Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tow Tie Down Forged Steel Working Load Limit: 6600 lbs

  • Weld-on Type, Grab, Hook. Working load limit 6600 lb.. Size 3/8 inch, Grade 70, for use with 3/8 in chain.
  • The best hook-used for welding on the tractor bucket, it is very suitable for any field of use, and can be used with the following statements: weld on hooks weld chain hook weld on clevis weld-on clevis grab chain hooks weld tow hook weld hooks for buckets forks weld hook3/8 weld hook grab hooks 3/8weld on grab hook weldable hooks weldon hooks weld clevis hook 3/8weld on chain hooks.
  • Grab hooks work well with chains and ratchet binders for securing your load or for tow anchors..
  • Material: Forged Steel，Package Includes:4pcs hooks.
  • Note: Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. We make every effort to provide customers with satisfactory service. Feel free contact us by emails if you have any problems..
Check Stock

Engine Elbow Adapter,90?? Elbow Adapter Exhaust Connection V?Band Clamp Stainless Steel 2.5in ID to 3.2in OD

  • Brilliant Compatibility:Engine Elbow Pipe For 2.5in/6.35cm ID 3.2in/8.13cm OD V-Band Flange.Manufactured according to the original specifications, which are very compatible with your model..
  • Good Replacement:90?? Flange Elbow Adapter Extremely good replacement on the market, can directly replace your old, broken flange elbow adapter.2.5in ID 3.2in OD V?band flanges on both sides, 90 degrees, with 2.5in pipeline..
  • Excellent Performance:Flange Elbow Adapter Connecting clamp have a good sealing function, if necessary, you can use welding process..
  • Easy to Install:90?? Elbow Adapter Easy to install, replace the old one directly, fix new one with a clamp, and weld if necessary.Practical and convenient in use.Such a practical tool you will need it..
  • Stainless Steel Material:Elbow Adapter Flange Clamp Precisely manufactured of high quality stainless steel material, durable, and long use life.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life..
Check Stock

Lonwin 3-Way Hitch Adapter with Bolt Fit for ATV Lawn Mower Golf Cart Garden Tractor

  • High Strength Steel 3-Way Hitch Adapter perfect fit for lawn mower, golf cart, garden tractor or bolting onto your ATV..
  • Trailer Hitch Adapter made of extra high strength steel. No weld joints create an inherently superior design..
  • Powder coated for superior durability and Corrosion resistance, unmatched protection and life..
  • Accommodates ball with 3/4" shank, 5/8" pin for trailer, and tow strap or chains on the loops.This hitch also includes the 3/4" mounting hardware shown..
Check Stock

600A Arcair Carbon Arc Gouging Torch Arc Welding Equipment Welding Accessories Heavy Duty Industrial Grade Torch with Cables Grooves Machining Tool

  • 【PRINCIPLE OF ACTION】The carbon arc gouging is a method of surface grooves machining which adopts carbon rods or graphite rods as electrodes to generate arcs with the workpiece and melt the metal, finally blowing the molten metal off with compressed air.
  • 【TURN AT ANY ANGLE】The gun head can be rotated at any angle, suitable for various specifications of carbon rods.The product can operate in any position with great flexiblity.It has good accessibility, it’s easy and convenient to operate.
  • 【ROTATABLE TAIL】The tail air pipe and the adapter can be rotated, which is convenient for application and simpler operation.High-quality cable hose provides high heat resistance and abrasion resistance.
  • 【ONE-KEY VALVE DESIGN】One-button air valve is designed in the middle of the handle, which is easier to operate with the handle.It’s mainly used to dig the groove, clear weld defects, and remove weld root.
  • 【HIGH ACCURACY】When clearing weld defects, the shape and depth of the flaw can be clearly observed under the arc.It’s high in precision and efficiency.It can reducing the labor intensity.
Check Stock

ORISTACO Work Safety Boots Breathable Lightweight Reliable Durable Steel Toe Industrial Construction Shoes High Cut 01 Black 46

  • MULTI-PROCESS WELDER- 3 in 1 Stick Welder, MIG Welder and DC TIG Welder (Accessories for TIG Welding not included) everything you need in one machine.
  • EASY TO USE- Easy start makes every strike EASY! Three position switch allows you to change process quickly.
  • CONTROL YOUR WELD- Infinite voltage and wire feed speed controls allows you to dial in the perfect weld. Rated output voltage range- 12 - 23V. Rated....
  • RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire. Full metal wire drive assembly.
  • WELDER INCLUDES- 10' MIG gun, 8' electrode holder, 8' ground clamp, Integrated handle with torch wrap, 20A - 15A adapter and one additional .030"....
Check Stock

Weld on Filler Cap, KIMISS Aluminum Alloy Weld On Oil Tank Filler Neck with Cap Filler Neck 1.5'' 1 1/2'' OD for Fuel Tanks Weld In Fuel Cell Cap Weld On Fuel Cap Fuel Filler Neck Aluminum Fill Cap

  • Scope of application: Weld On Billet Caps Aluminium Weld on Filler Neck does not need to be replaced frequently, with strong practical and durable. The filled neck with cover is suitable for oil tank, fuel tank, water tank, dry tank, etc. It is a high-quality, quality-guaranteed auto parts, and Fuel Filler Neck And Cap is your best purchase choice..
  • Product function: Weld On Fill Cap Fuel Filler Neck has smooth finished design, come with a O-shaped sealing ring and a natural aluminium screw on cap. Weld on Cap meets aviation hose fitting requirements, precision m....
Check Stock

J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz.

  • JB WELD: Is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Perfect for household, automotive, marine and craft uses..
  • THE ORIGINAL COLD WELD: JB Weld was developed as an alternative to torch welding. Designed to be effective in extreme environments, once it sets, it creates a permanent bond stronger than steel..
  • EASY TO USE: Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color..
  • VERSATILE & DEPENDABLE: J-B Weld has a tensile strength of 3960 PSI & sets overnight. It can withstand temperatures up to 550ºF when cured. Great for use on brick, concrete, metal, fiberglass & more..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World’s Strongest Bond..
Check Stock

Fulton 500320 XP to F2 Adapter Kit for F2 Swivel Mount with 4' Frame

  • Fulton F2 Jack Adapter Plate allows you to upgrade from a Fulton Center-Bolt Swivel Mount Jack to an F2 Series Marine and Recreational Jack.
  • Fits Fulton's patented center-bolt design - used on XP10 and XP15 weld-on jacks.
  • Heavy-duty, cast aluminum mount is tapered, moving wheel closer to center line of trailer frame to optimize castering performance.
  • installs easily - no drilling or welding required.
  • All necessary mounting hardware and complete installation instructions included.
Check Stock