CRANKSHOOTER High School Lacrosse Practice Goal, 6x6x7, with 6mm White or Black Net. Lacing Rails, 59 lbs (6mm Black Net)

  • Heavy-Duty Steel Tubing 1.75″ Diameter tubing x 1.5mm thick (This goal does not have a flat iron base like the college goals)..
  • Individually welded lacing rails on back of tubing for effortless set up..
  • Includes the tough High School/College 1000d Hi Tension 6mm white lacrosse net by Crankshooter, triple stitched, 100 ft of lacing cord. The toughest lacrosse net available. The 1000d netting material we use is 40% stronger than the 600d material most all nets are made from..
  • Official NCAA Spec Size 6’ x 6’ x 7′.
  • Mitered 90 degree top corners and reinforced welded bottom brackets for toughness.
Check Stock

Super Efficient 3/8\ x 25' Stainless Steel Wort Chiller

  • Perfect for the kitchen homebrewer that is making extract batches. Typically, with extract batches you boil a smaller amount of concentrated wort (1-3 gallons) and then add clean cool water before adding the yeast..
  • The compact 15' copper immersion chiller is the perfect size for these batches and easily connects to your kitchen sink with a sink adapter (not included)..
  • Made in the USA (Michigan) from pure 3/8” copper tubing..
  • Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
  • Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
  • The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
  • 6.75" x 3" x 14" (coil diameter x coil height x inlet height).
Check Stock

Raindrip 100050100 1/4\ 50' White Tubing, 0.25 inches x 50 Feet

  • Slowly waters the soil around your plants for complete root zone hydration.
  • Ideal for short runs on flat surfaces, such as vegetable gardens, borders, and around small plants.
  • Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170 in..
  • connects to ½ in., 5/8 in., or 0.710 in. supply line with ¼ in. micro fitting such as a barbed connector or Clamp N Pierce Connector.
  • As part of a complete drip irrigation system, the soaker tubing seeps out water from the entire line, keeping soil moist.
  • Flexible tubing bends to accommodate curved irrigation areas as well as straight runs.
  • Porous non-pressure compensating material gently seeps water out of the entire line of tubing.
  • Comes with one 50 ft. coil of ¼ in. Soaker Tubing.
  • in cold climate areas, no need to winterize—the soaker tubing can be left in place or covered in soil or mulch, excess water will gradually seep out.
Check Stock

Northern Brewer Deluxe Homebrew Starter Kit, Equipment and 5 Gallon Recipe (Fresh Squished IPA)

  • A 30' wort chiller is the perfect size if you are making full boil extract kits or making smaller all grain batches (3-6 gallons)..
  • Made in the USA (Michigan) from pure 3/8” copper tubing..
  • Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
  • Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
  • The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
  • It can easily connect to your kitchen sink with a sink adapter (not included).
  • 9" x 4.25" 18" (coil diameter x coil height x inlet height.
Check Stock

DEWALT 20V Pro Press Tool For Copper Pipe and Stainless Steel Pipes, Plumbing, ½”-1 ¼”, Includes Crimping Head, 2 Batteries and Charger Included (DCE200M2K)

  • DIY: Perfect kit for the home-owner or the professional looking to get started with PEX plumbing bundle. Save time looking for all parts needed to get the job done..
  • HIGH QUALITY: Comes with great PEX tools that makes it comfortable and easy to work with. It also has the ability to work in hard to reach tight spaces. Compatible with PEX piping system..
  • TOOLS: 1x PEX Crimper Tool With Lock Hook.
  • 1x PEX Scissor Shear Cutter Tool - Spring-Loaded Handle, Lock Hook & Convenient Carrying Case.
  • FITTINGS: Lead Free Brass Barbed 1/2 inch 90-Degree Elbow Fittings (Bag of 25) + Lead Free Brass Barbed 1/2 inch Straight Coupling Fittings (Bag of 25).
  • TUBING & CLAMPS:1/2 Inch Blue Pex Tubing 100 Feet Coil + 1/2 Inch Red Pex Tubing 100 Feet Coil, Stainless Steel half inch Cinch Clamp Rings (Bag of 100) + Half Clamp with Nail (Bag of 100).
Check Stock

iCrimp Pex Pipe Crimping Tool kit for 3/8,1/2,3/4,1-inch Copper Ring with Free Gauge&Pex Pipe Cutter -Meet ASTM F1807 and Portable

  • DIY: Perfect kit for the home-owner or the professional looking to get started with PEX plumbing bundle. Save time looking for all parts needed to get the job done..
  • HIGH QUALITY: Comes with great PEX tools that makes it comfortable and easy to work with. It also has the ability to work in hard to reach tight spaces. Compatible with PEX piping system..
  • TOOLS: 1x PEX Crimper Tool With Lock Hook.
  • 1x PEX Scissor Shear Cutter Tool - Spring-Loaded Handle, Lock Hook & Convenient Carrying Case.
  • FITTINGS: Lead Free Brass Barbed 1/2 inch 90-Degree Elbow Fittings (Bag of 25) + Lead Free Brass Barbed 1/2 inch Straight Coupling Fittings (Bag of 25).
  • TUBING & CLAMPS:1/2 Inch Blue Pex Tubing 100 Feet Coil + 1/2 Inch Red Pex Tubing 100 Feet Coil, Stainless Steel half inch Cinch Clamp Rings (Bag of 100) + Half Clamp with Nail (Bag of 100).
Check Stock

OdontoMed2011 New O.R Grade YANKAUER Pediatric Suction Tube INTSTRUMENT ODM

  • NON-CONDUCTIVE SUCTION TUBING: Provides easy handling and drapability with low coil memory. It also has thick tubing walls that offer safety and collapse-resistance at high vacuum pressures..
  • MAXI-GRIP CONNECTORS: Tubing is equipped with female patented connectors to accommodate a wide range of surgical instruments and equipment with a secure fit..
  • RIGID MALE CONNECTOR: In addition to the Maxi-Grip Connector, every sterile tube includes a rigid male connector for coupling additional tubes..
  • ECONOMICAL AND NON-STERILE: A cost-effective solution with the quality and reliability you need to remove fluids from the surgical field..
  • PRODUCT QUANTITY: The Cardinal Health Medi-Vac Non-Conductive Suction Tubing comes in a case of 50..
Check Stock

Batman - The Dark Knight - Trailer Hitch Cover

  • Batman The Dark Knight Trailer Hitch Cover,.
  • Square Tubing Welded to the Batman symbol.
  • Laser Cut Steel, Welded Steel, Heavy Duty and Durable.
Check Stock

Smittybilt 45454JL Defender Rack for 2018+ Jeep Wrangler JL 4-Door

  • 4. 5-foot wide x 4. 5-foot long x 4-inch sides.
  • Mounting brackets included for easy installation, no drilling required.
  • Made from 16-gauge, fully welded, 1 inch round steel tubing.
  • Welded light tabs and aerodynamic design.
Check Stock

Stainless Steel Beer Cooling Coil, Home Brewing Immersion Wort Chiller Pipe Bar Wine Making Machine Part 8.8M Cooling Coil Pipe(Silver)

  • A 60' wort chiller is the perfect size for all grain brewers making 6-11 gallon batches..
  • Made in the USA (Michigan) from pure 3/8” copper tubing..
  • Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
  • Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
  • The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
  • It can easily connect to your kitchen sink with a sink adapter (not included).
  • 9" x 9.5" x 20" (coil diameter x coil height x inlet height).
Check Stock

Heating Power Supply Module 5v - 12v ZVS Low Voltage Switching Induction Heating Power Supply Module with Heater Coil

  • HIGH QUALITY: This is Zvs heating power Supply module including heating coil,it’s durable for a long lasting to life..
  • INPUT VOLTAGE: DC5V-12V(We are not guarantee the module will work when the voltage is over 12V or less than 5V).
  • INDUCTION HEATING: power work five minutes to cool. For induction heating current is larger, heating coil is relatively large. When heated, part of the heat generated by the heated object will be passed on to the heating coil, over time, the temperature of the heating coil will be high. If the heating coil in the words of the terminal, the terminal part of plastic melt,Therefore, induction heating the best heating coil directly welded to the PCB..
  • HEATING COIL: The width of the heated objects as far as possible between the heating coil diameter of 1/3 ~ 1/2, most don’t more than two-thirds..
  • NOTE: Ensure all the components welding right, power line connect in right way, than to set up an electric circuit, The Width of the heated object is as far as possible between the 1/3 ~ 1/2 of the inner diameter of the heating coil, the maximum not more than 2/3..
Check Stock

Moroso 65340 Fuel Line, 1/2\ OD, Aluminum, 25' roll

  • Lightweight aluminum tubing replaces small diameter fuel lines used in most production automobiles Large diameter, . 035" thick wall seamless tubing flows more fuel and eliminates fuel starvation Legal in all classes tested to 35 PSI.
Check Stock

1/8\ X 50' Soft Copper Tubing

Check Stock