Best Welded Cross - TopShopReview.com

3243012-144 Grip Strut Channel 12 Gauge Galvanized Steel 4-Diamond Plank Safety Grating, 144\ Length x 9-1/2\ Width x 3\ Depth

Upper cross bar made from 2 inch high-grade steel tubing.
Made from a fully welded one-piece construction with 4 gauge steel uprights.
Cross plates feature multiple mounting points for easy mounting of auxiliary lighting or additional equipment.

High quality, galvanized steel, with welded cross wires for added strength.
All cross wires are trimmed flush for smooth uniformed edges, allowing for easy installation.

Very popular frame that allows one or two hand control.
Four horizontal cross straps and vertical center strap provide support for small packages.

Heavy duty Material: The snow chains are made of alloy manganese steel, which are welded together with 100-150KH High Frequency Current. Manganese alloy cross members provide superior, all-around traction performance and greater durability compared to conventional traction products, and not easy to rust..
Safe and Durable: The snow chains grid structure links the three chains together to increase the strength and anti-skid ability, especially to prevent side slip. The diamond-shaped cross chain provides smoother riding, better compatibility with anti-lock brakes, traction control, all-wheel drive (AWD) and other electronically monitored control systems..
Tire Chains Attention: 1, No sudden braking, sharp turns. 2, After installing the chains and driving for hundreds of meters, please tighten the chains again. 3, The driving speed should be less than 35 km / h. 4, When there is no snow or mud on the hard road and the anti-skid chains is not required, please take them off in time. 5, Installation is forbidden at the position of the inflation hole..
Heavy duty Material: The snow chains are made of alloy manganese steel, which ....

Welded steel workbench with lower shelf and 4,500 lb. load capacity.
12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
Angle iron cross braces on lower braces are centered to provide legroom.
Gray powder coat finish for resistance to chipping and corrosion.
Lower half-shelf with 3" lip for storing items while providing legroom.

Welded steel workbench with lower shelf and 5,000 lb. load capacity.
12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
Angle iron cross braces on lower braces are centered to provide legroom.
Gray powder coat finish for resistance to chipping and corrosion.
Lower half-shelf with 3" lip for storing items while providing legroom.

Welded steel workbench with open base and 5,000 lb. load capacity.
12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
Angle iron cross braces on lower braces are centered to provide legroom.
Gray powder coat finish for resistance to chipping and corrosion.
Legs and lower braces made of 3/16" thick angle iron with 1-1/2" sides for strength.

REFLECTIVE STITCHING THROUGHOUT: We've incorporated high-visibility reflective stitching throughout our award-winning design to increase nighttime visibility and safety for both you and your dog..
RUGGED WELDED STAINLESS STEEL D-RING: Our rustproof stainless steel welded D-ring leash attachment gives you the ultimate in strength, durability, and security..
SELECT THE BEST SIZE: Based on your dog's GIRTH measurement. If you are close to the end of a size, bump up to the next size: Girth (Inches): XS 12”-19”, SM 15”-24”, MD 18”-29”, LG 19”-33”, XL 22”-38”, XXL 30”-53”.

Great For Replacing Old Cemetery Headstones Or Marking A Grave Site. This White Cross Makes Cemetery Decorating Simple & Easy. Can Be Used To Remember A Pet..
Powder Coat Finish - White UV Stable Paint Can Handle All The Elements Keeping Your Cemetery Plot Looking Clean For Many Years..
Hand Arc Welded - You Won’t Ever Have To Worry About This Cross Breaking. It’s Built For Top Quality. You’ll Have Peace Of Mind Knowing This Cross Will Look Great. We Back It Up With Our Lifetime Structural Warranty..
Simple Installation - Push Into Wet Soil To The Desired Height. If Ground Is Too Hard, Dig A Small Hole To Get Started. Do NOT Use A Hammer..
Made In The USA - Designed And Engineered By The Alexander Family Since 1927..

...r axle is in the forward-range of the adjustment area, the tire may be too close to the shock mount to fit without a stretch installed! Verify your axle adjustment range and that you have at least ¾” distance between the leading edge of the tire and the rear part of the swingarm cross-bar that the shock mount is welded to..
*PLEASE READ: If you are running a larger-than-stock tire, this item may not fit, depending on your axle adjustment. Please verify that you have at least 3/4" of distance between the leading edge of the tire and the rear part of the swingarm cross-bar that the stock shock mount is welded..
**IMPORTANT: Actual lowering height will vary... The added length of a stretch will cause the swingarm/axle-height in relation to the frame to move further than the stock length swingarm when lowered... with a stock swingarm length, it is closer to ~1.5" of lowering height... with the extended swingarm, it is closer to 1.75-2" of lowering, depending on the length of stretch you choose..