Categories

Best Welded Eye Bolts

Andersen Ultimate 5th Wheel Connection Lock (Andersen Ultimate 5th Wheel W/Trimax)

  • ULTRA-HIGH SECURITY TRAILER COUPLER/HITCH LOCK: Proprietary straight forward and strong design fits all versions of the Andersen Ultimate 5th Wheel connection to include both funnel applications (steel and red poly) and the new upgraded eye bolts..
  • HEAVY DUTY: This Andersen Ultimate 5th Wheel Connection lock is constructed of 3/16" fully welded cold rolled steel, with welded hinges and hinge pins and is bolt cutter, and crowbar proof!.
  • BRIGHT YELLOW POWDER COAT FINISH: We believe in presenting a hard target that is why we use a bright yellow powder coat to warn off would be thieves..
  • TRIMAX PUCK LOCK: This high-security, hidden-shackle padlock features a 2-7/8" wide lock body that conceals a 3/8" diameter shackle to prevent theft..
  • FT. KNOX LOCKS: We are a family run and operated small business with our locks designed and proudly made in the USA..
Check Stock

Oatey 43791 PVC Saddle Tee Kit, 4-Inch x 2-Inch,White

  • The product is highly durable and easy to use.
  • For tapping into a 3-Inch or 4-Inch Sch. 40 DWV line.
  • Saddle is solvent welded to the existing line and secured with metal V-bolts, washers and nuts provided in the kit.
  • The tee accepts the incoming line inside the socket, or joins with a Sch. 40 DWV fitting.
Check Stock

Binzzo Pad Eye Plates U Shaped Hook M5 Oblong Anchor Staple Ring Fastener Snap Screw Welded Well Hold up Climate Strong No Location Limited for Hammock Swing 304 Stainless Steel with Screws 2 Sets

  • Appreciated high tension capacity.The loop is welded together to the pad.The eye bolts can be twisted way out cleanly.The fastener plates are still....
  • Keep it from rust,hold tightly.The smooth durable coating can resist weather,holds up against the different weather climates,even withstood strong....
  • These pad eye plates are wonderful anchors.The countersink are deep enough,the screw heads won't stick out.Combined well.The eye hooks are long enough....
  • Save your time.It is easy to get these mounted into the wall in just a few minutes with a percussion drill.Also can install it directly on the wooden....
  • Versatile use:The U-shaped plates works great for hanging Christmas lights.Using these to hang flower pots and they are doing a good sturdy job,on....
Check Stock

Ultra-Fab Products 15-954730 Universal RV Tire Carrier

  • Powder coated and rust resistant for long life..
  • Heavy-duty welded construction for greater strength..
Check Stock

Seven Sparta Tie Down Anchors for Truck, Trailer, Warehouse, Boat, 10 Pack of Heavy Duty Steel V Ring Bolts, Tie Down Rings（Black）

  • FULLY WELDED V RING BOLTS. Seven Sparta tie down anchors are made of quality steel and they are fully welded triangular rings, which make the bolts sturdy and work for a very long time..
  • WIDE RANGE FOR USE AND GREAT PERFORMANCE. The tie down anchors are heavy duty 1000 lb rings, they are ideal to add tie down points for a truck, trailer , SUV , boat to carry heavy loads, and let you far away from cargo's’ swing and noise..
  • PAINTED WITH QUALITY BLACK PROTECTIVE COATING TO AVOID RUSTING. There are quality coating painted on the tie down anchor to keep it far away from rusting, you should never worry about the rain or other matters to make the bolts rusted, they must keep in good condition to water..
  • SINGLE HOLE MOUNT FOR EASY INSTALLATION. Our V-ring designed with one point mount, just thread bolt through the 13/32" diameter hole and mount the ring to a sturdy surface, all of the installations are completed..
  • NO-RISK PURCHASE! UNCONDITIONAL 30-DAY MONEY-BACK GUARANTEE. If you’re unsatisfied with this item for any reason, we’ll immediately refund your purchase price. ADD TO YOUR CART NOW!.
Check Stock

Little Giant WST1-3048-36-LP Fixed Height Welded Steel Workbenches, Louvered Panel, 30\ x 48\

  • 16 gauge louvered panel bolts on to welded fixture.
Check Stock

45\ Aluminum Cam Bar Trailer Lock Assembly SS Mounting Hardware

  • 48" Auminum Trailer Cambar latch & hardware, Non polished finish.
  • Includes 4 - 5/16" x 2" carriage bolts & nylon nuts, washers.
  • SS hasp 2" W x 5 1/8" L, padlockable hole w/ mount bolts & camnuts.
  • Hinges & handle welded to 1" OD Sch 40 Aluminum pipe, non anodized.
  • Hinge pin of corrosion resistant material to prevent binding.
Check Stock

Kay 36\ Aluminum Cam Bar Lock Assembly SS Hasp & mounting Hardware

  • 36" Auminum Trailer Cambar latch & hardware, Non polished finish.
  • 4 - 5/16" x 2" carriage bolts & nylon nuts, washers to fasten hinge to frame.
  • SS hasp 2" W x 5 1/8" L, padlockable hole w/ mount bolts.
  • Hinges & handle welded to 1" OD Sch 40 Aluminum pipe, non anodized.
  • Hinge pin of corrosion resistant material to prevent binding.
Check Stock

Shocker Hitch Vertical Channel Weld On Tongue Adapter for Trailer A-Frames Completely Welded

  • Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame. Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame..
  • Equipped with 6 Adjustment Holes. Raw Steel. The six bolt hole pattern works great with typical vertical channel bolt on trailer couplers. Actual vertical channel is 3-1/2" x 11-3/4" w/ 2" on center bolt pattern.
  • The outer front is 4" wide, the outer rear is 11" wide. From front to back it measures 7-1/2". Weight Rating: If you are using 2 bolts to attach coupler then its 14,000 lbs if using 4 bolts then 20,000 lbs that also assumes this kit is properly weld onto the trailer and the coupler you are using can handle those respective capacities..
  • Allows you to convert your trailer a-frame to one that accepts Vertical Channel couplers. Welding required for installation..
  • 3 Style to choose from - Completely Welded, Spot Welded & Components Only (2 Sides,Base & Vertical Channel). Made in the USA by Shocker Hitch - Arthur, ND.
Check Stock

Williams EB-25T 1/2-Inch Shoulder Eyebolt

  • Dimension: This M10 Eye Bolt rod total length 112mm/4.4inches, thread outer diameter is 10mm/0.39inch, thread length 70mm/2.75inches, ring inner diameter 25mm/0.98inch.
  • Ring Bolt Features: The heavy duty eye bolts 2.75" with strong support, the lock nuts providing better security and firm hold, the washers included can prevent loosening.
  • Perfect Kit: These M10 shoulder eye bolts Often used to attach rope or other hardware to a surface or object, suitable for homes, offices and other places, play the role of attachments and suspension.
  • High Quality Material: The stainless shoulder eye bolt is made of high grade 304 stainless steel, The surface of the thread is smooth, the force is even, it is not easy to damage, and it is durable, This stainless eye bolt is made of super large machine, which offers good corrosion resistance in any environment, have superior rust resistance and the excellent of oxidation resistance.
  • Package includes: 2 x shoulder eye bolts, 2 x nuts, 2 x washers, if you are not satisfied with the product, you can always send us an email to us, provide you with satisfactory service in the first time.
Check Stock

MARINE CITY Stainless Steel Strong Sturdy Stern 5/8 Inches Stock Fixed Welding Plate Bow Eye Tie Down U Bolt - L 8 Inches for Marine Boat Yacht Accessory Hardware

  • It is made of bright polished exterior finish 304-grade stainless steel, commonly used as deck hardware in highly corrosive marine environments..
  • Dimensions: Overall Length: 8 inch / 204 mm, Thread length:140 mm / 5.5-inch, Distance between centers: 48.3 mm / 1.9-inch, Stock diameter (Cutting thread): 5/8-inch, Maximum tensile strength of 11 tons..
  • Marine City U-bolts may be used where an eye bolt would be too small or extra strength is required..
  • A welded base plate to minimize possible corrosion and provide excellent sealing..
  • Package Content: Supplied with Nuts and Washer..
Check Stock

Little Giant WST2-3672-AH-PB Adjustable Height Welded Workbenches with Pegboard Panel, Lower Shelf, 4000 lb. Capacity, 36\ Depth x 72\ Width, Gray

  • 16 gauge Pegboard Panel Bolts on to welded fixture.
Check Stock

XGEAR 4 Step Pontoon Boat Ladder, Foldable Premium Stainless Steel Marine Yacht Ladder/Swim Deck Ladder with Pedal Hand Railing,Slip-Proof Plastic Tread, Retaining Strap

  • HEAVY DUTY WELDED MATERIAL: Well-welded stainless steel marine grade tubing gives the pontoon ladder robust, durable and corrosion-resistant quality as well as the sleek lines.Extra tall, comfortable handrails for easy boarding..
  • NON-SKID STEP THREADS: The design of extra wide slip-proof tread is intended for maximum safety and comfort boarding. Good for swimmers or divers with fins and heavy gear..
  • EASY DROP & STORAGE: The telescopic steps drops smoothly and retracts easily, so you can store them with strap when not in use..
  • Length Folded 16.7″, Length Extended 45.5″, Width (Outside of Bracket) 14″, Step Thread: 10.4″ X 2.4″.
  • Handrail and Mounting Screws are included(Nuts/PP Caps/M6*40 Self-Tapping Screw/M8*40 Self-Tapping Screw/Hexagon Bolts/Round-Head Bolts/L-Shaped Wrench).
Check Stock