DNA Motoring FXP-FESC01 Flex Pipe Connector [For 03-08 Ford Escape 3.0L V6]
- Made of high quality T-304 stainless steel with flex.
- TIG welded CNC machine flange for resistance against pressure and corrosion.
- Slips over factory exhaust pipe to be clamped or welded to repair broken flex section.
- 2"diameter 2-bolt inlet to 2. 125" factory sized pipe outlet.
Check Stock28' x 7' x 2.5' Universal Turbo Intercooler Kit with Intercooler + 8pcs Bent Pipes + 6pcs Straight Couplers + 2pcs 90 Degrees Elbow Couplers + 16pcs Clamps Black (8Pcs Black)
- This 2.5 Inch intercooler tube kit is universal,fits for all the turbo car's upgrade and replacement(modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line..
- 2.5" piping diameter, Increase 65% air flow and engine displacement,and can greatly increase engine power and torque comparing with other standard piping..
- Solid all-welded construction for maximum strength and safety. Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention..
- Quick installation,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
- 【8-Piece Piping Set Includes】:1 x 28"x7"x 2.5" Intercooler.
Check Stock4" U Bolt Saddle Exhaust Clamp - Zinc Plated Flat Band
- 4 inch U bolt Clamp with Welded Saddle is made in Zinc-Plated Steel.
- This double-edge Clamp provides superior strength and sealing-ability, Zinc plated for corrosion resistance provides longer life.
- Heavy duty welded saddle design for extra strength and Flat band for 360-degree seal.
- Flat Band prohibiting pipe distortion and damaged, better protect pipe ends.
- Tested to the highest heavy duty standards to having equal performance with OE brand in durability, safety and reliability.
Check Stock
Upgraded Blacksmith’s Welded Coal Forge Firepot – 10 X 12 Inch 2600F Rated Blacksmithing Firepot for Forging Blacksmith Farrier, Knife and Tool Making
- 【WIDE APPLICATION】– Welded Blacksmithing Firepot is one of the important tool in a blacksmith’s workshop! It is a perfect choice for smaller projects, used to forge the hammers, punches, tongs and other metal working operations. Also for heating and bending of metals, tempering and heat treatment of small knives & agricultural tools. Fabricated Firepot is a great pick for the DIY blacksmith, beginners, hobbyist or farrier, easy to use..
- 【UPGARDE DESIGN 】– Designed with one-piece in the ash dump / air pipe system, the firepot use with a clinker breaker, weighted ash dump, and air-inlet pipe. ①The air-inlet pipe allows air to come into the firepot from your blower, let the coal of bottom full burn to provide enough heat. ②The clinker breaker pivots on a 1/2 inch rod, used to remove wast ash dump. ③The welghted ash dump can auto open-close when removing wast ash dump..
- 【SUPERIOR MATERIAL】– All thick metal, made entirely from heavy duty 1/2-inch thick and plasma cut plate steel with solid and sturdy. And is welded inside and out, all welds have good penetration and are solid. Quality and function exceed the cast iron firepot, it is best replacement to your cast iron firepot. When fabricated firepot is exposed to temperature change....
Check Stock
Pachletool Fish Tape Fiberglass 425FT 6MM(1/4in), Fish Tape Wire Puller Duct Rodder Wire Cable Running, Electrical Fish Tape Rod with Cage and Wheel Stand, Durable Steel Reel Stand Conduit Puller
- Fish Tape Specifications: Cable diameter: 6mm (1/4''). Cable length: 130 M (425FT)..
- Fish Tape Fiberglass: The fiberglass wire cable is compact, non-conductive, light weight, durable, good resilience, aging resistant, corrosion resistant. Exceptional bending strength, not easy to break..
- High Quality Material: The bracket is welded by high-quality steel, strong and durable, non-rusting, corrosion-resistant, with good compression resistance capacity and proper structure. The frame with a triangular base is stable enough to stand outdoor..
- Easy To Use: Rodder puller with brake device, with a top handle for moving freely. The guiding line is long enough for distance work. Is simple and convenient to carry, store and maintain..
- Wide Application: Rodder Puller is widely used in communication, electrical, wall pipe, floor pipe, walker pipe and utility installations. It is an excellent assistant tool for traction and guideline in the pipeline..
Check StockTop Notch Parts Replacement Big Bore Cylinder Complete Head Polished Ports Performance Camshaft For 99 00 01 02 03 04 05 06 07 08 Honda Trx400ex TRX 400ex 440cc
- Economically priced high quality slip-on exhaust system.
- USFS forestry approved screen type removable spark arrestor Included Tig welded stainless steel pipe construction 6061 Br+AM15u.
Check Stock
Pre Wired Dominator Industries 1 1/4 Inch Road Glide Meathook Monkey Ape Hanger Handlebars, 14 Inch Rise, Gloss Black for 2015-2021 Harley Road Glides Heated Grip Option
- 【Fitments】:Most Harley Dyna Softail Sportster XL 883 1200 & 1994-2021 Road King Model & 1998-2013 Road Glide. Do not fit Harley Electra Glide,Street Glide & 2014-UP Road Glide. Do not fit 2008-2011 Harley Cross Bones FLSTSB with OEM risers (For details, please refer to product description).
- 【Hight Quality】: steel line pipe (Much Stronger than other's Straight Seam Welded pipe handlebar on the market). Gloss Black(Copper+Nickle+Powder Coated Black),High Standard Rust-Proof Plating which can be tested by salt spray 48 hours neutral..
- 【Specifications】:Bar Diameter: 1.5 inch Fat Bar, Center Width: 11-1/2 inch, Clamp Area Width: 5.4 inch & Diameter: 1 inch, Grip Area Bar Diameter: 1 inch, Overall Width: 35.5 inch, End Rise: 12 inch, Pullback/Sweep: 8 inch, Pre-Drilled: Yes, Model: Monkey Bagger Bar.
- 【Installation】:The Monkey Bagger Bar model with wiring holes, no drilling required, easy to install..
- 【Package Including】:1x Black 12" Handlebar.
Check StockUPOWER 3" Inlet&Outlet Exhaust Resonator,9" Overall Length Center Straight Through Stainless Steel Muffler,Polished
- ... Please measure your exhaust pipe’s dimension before purchasing this 3 inch muffler..
- FIT: 3 inch inlet & outlet exhaust center straight through muffler, universal fit for all 3 inch exhaust pipe. Muffler and exhaust pipe are considered matched as long as they can be welded together seamlessly..
- PERFORMANCE: The 3 inch inlet resonator muffler is made of high quality stainless steel and used CRF (Continuous Roving Fiberglass) technology, which can absorbs unwanted interior resonance and produces a low, deep tone. Brushed finish for good looking..
- INSTALLATION: 100% welded design performance resonator for long-lasting durability. Installation instructions are not included, professional installation is highly recommend..
- WARRANTY: Upower provides 90-days warranty for each resonator muffler. Before purchasing, please make sure the Brand Logo is "Upower"..
Check StockUPOWER 3" Inlet&Outlet Exhaust Resonator,16" Overall Length Center Straight Through Stainless Steel Muffler,Polished
- ... Please measure your exhaust pipe’s dimension before purchasing this 3 inch muffler..
- FIT: 3 inch inlet & outlet exhaust center straight through muffler, universal fit for all 3 inch exhaust pipe. Muffler and exhaust pipe are considered matched as long as they can be welded together seamlessly..
- PERFORMANCE: The 3 inch inlet resonator muffler is made of high quality stainless steel and used CRF (Continuous Roving Fiberglass) technology, which can absorbs unwanted interior resonance and produces a low, deep tone. Brushed finish for good looking..
- INSTALLATION: 100% welded design performance resonator for long-lasting durability. Installation instructions are not included, professional installation is highly recommend..
- WARRANTY: Upower provides 365-days warranty for each resonator muffler. Before purchasing, please make sure the Brand Logo is "Upower"..
Check StockUPOWER 2.25" Inlet&Outlet Exhaust Resonator,14" Overall Length Center Straight Through Stainless Steel Muffler,Polished
- ...easure your exhaust pipe’s dimension before purchasing this 2.25 inch muffler..
- FIT: 2.25 inch inlet & outlet exhaust center straight through muffler, universal fit for all 2.25 inch exhaust pipe. Muffler and exhaust pipe are considered matched as long as they can be welded together seamlessly..
- PERFORMANCE: The 2.25 inch inlet resonator muffler is made of high quality stainless steel and used CRF (Continuous Roving Fiberglass) technology, which can absorbs unwanted interior resonance and produces a low, deep tone. Brushed finish for good looking..
- INSTALLATION: 100% welded design performance resonator for long-lasting durability. Installation instructions are not included, professional installation is highly recommend..
- WARRANTY: Upower provides 90-days warranty for each resonator muffler. Before purchasing, please make sure the Brand Logo is "Upower"..
Check Stock
Mofun 12" Rise Ape Hangers 1.5" Fat Bars 1" Clamp Handlebars Fits for Harley Softail Dyna Sportster XL 883 1200 1998-2013 Road Glide 1994-2023 Road King Gloss Black
- 【Fitments】:Fit most Harley Dyna Softail Sportster XL 883 1200 & 1994-up Road King Model & 1998-2013 Road Glide.**Do not fit Harley Electra Glide,Street Glide & 2014-UP Road Glide** **Do not fit 2008-2011 Harley Cross Bones FLSTSB with OEM risers**Can not fit model with 1.25 Handlebar Clamp below.You can ask customer service for more detail information of motorcycle model..
- 【Specifications】:Bar Diameter: 1.5 inch Fat Bar.Center Width: 11.75 inch, Clamp Area Width: 5.4 inch & Diameter: 1 inch.Grip Area Bar Diameter: 1 inch.End Rise: 12 inch.Overall Width: 35 inch.Pullback/Sweep: 8 inch..
- 【High Quality】:Material: Seamless steel line pipe (Much Stronger than other's Straight Seam Welded pipe handlebar on the market)Finish: Powder Coated Black(Copper+Nickle+Black),High Standard Rust-Proof Plating which can be tested by salt spray 48 hours neutral..
Check StockCustom Threaded Exhaust Adaptor Flange Kit Diy Generator Fits HONDA GX390
- Heavy duty threaded exhaust flange kit for use on Honda GX390 engines. This is an un welded DIY kit so you can choose the length of the threaded pipe to work best for your application. Great for custom exhaust setups on generators, go karts, mini bikes, or garden equipment. Flange is CNC cut from heavy 1/4" steel plate to prevent warping, outlet pipe is 1" NPT pipe thread that matches exhaust port perfectly for maximum flow. Length of outlet pipe piece is 2.5"..
- Comes complete with stainless steel mounting hardware for a quality installation..
Check StockCar Hose Removal Plier Tool, Fuel Vacuum Tube Pliers Hose Removal Tool, Fuel and Vacuum Line Remover Separator Pliers Pipe Repairing Tool
- Hose Removal: This line and pipe separator pliers is mainly used to remove stubborn hoses on heater water tanks, radiators, pumps, air filters, etc..
- Durable Material: This line and pipe separator pliers are made of steel, sturdy and durable, not easy to damage.
- Strong Practicability: This line pipe separator pliers has a compact design and strong practicability.
- Comfortable Handle: This line pipe separator pliers is designed according to ergonomic principles, and the rubber-coated handle is labor-saving and comfortable to use.
- Applicable Size: This line and pipe separator is suitable for removing fuel, vacuum or heater hoses with a diameter of 5/32 inches to 1/2 inches (4mm to 14mm).
Check Stock
