Categories

Best Welded Round Steel Pipes

Gibson 65572 Stainless Steel Dual Extreme Exhaust System

  • Exits Behind Rear Tire At An Aggressive Angle.
  • Superflow Performance T-304 Stainless Muffler, fully welded, Not packed or screened, nothing to blow out.
  • T-304 High Polished Stainless Steel Clampless Slash Tips.
Check Stock

Gibson 618802 Stainless Steel Single Exhaust System

  • Incl. Muffler/2.5 in. Pipes/3 in. Stainless Tip.
  • Superflow Performance T-304 Stainless Muffler, fully welded, Not packed or screened, nothing to blow out.
  • T-304 Stainless Steel Clampless Slash Tip. Lifetime Limited Warranty.
  • California Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer andbirth defects or other reproductive harm.
Check Stock

DNA MOTORING CBE-NM00-NRT Stainless Steel Cat Back Exhaust System [Compatible with 00-03 Nissan Maxima]

  • 【FITMENT】Compatible with 2000-2003 Nissan Maxima.
  • 【Quality Construction】Made of 16-Gauge Aluminized Steel for Increased Performance to Value. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】4" OD Sized Piping, 5" OD Polished Round Slant Rolled Muffler Tip.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

DNA MOTORING CBE-VWGOLF99 Cat Back Exhaust System [Compatible with 99-05 Volkswagen Golf Mk4,99-05 Volkswagen Jetta A4 Typ 1J]

  • 【FITMENT】Compatible with 99-05 Volkswagen Golf Mk4, 99-05 Volkswagen Jetta A4 Typ 1J.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC....
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth....
  • 【Muffler & Diameter】Round muffler tip. Inlet / Outlet diameter is 2.5" OD / 2.5" OD. Tip diameter (IN) is 4" OD..
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on....
Check Stock

JzNova 12

  • DESIGN & APPLICATION - Square Heavy Duty Metal Plant Stand with wheels, welded from high quality square steel pipes, very sturdy and stable. Suitable for multi-shapes of plant pots or bucket. This plant caddy dolly holder can be widely used indoor and outdoor for moving garden pots, heavy plants, large potted trees, large vases, whiskey barrels or heavy trash cans, it can also hold heavy printers, kitchen mixers, mixing bowls, salt lamps, and crystals..
  • SIZE & LOAD BEARING - 12"L x 12"W x 3.15"H, please measure the diameter of the bottom of your flowerpot before you buy it. Actually, it also suitable for 14 "or 15" plant pots, because the diagonal length of plant stand is 17". The distance between the bottom of the plant caddy and the ground is 2.2 inch. The diameter of the PVC wheel is 1.5 inch. The plant stand dolly is strong enough to hold up to 350 Lbs (160 kg) plant pots or bucket..
  • 360 DURABLE INDUSTRIAL WHEELS DESIGN - 360 degree rotating wheels make your work easily and efficient, plant dolly or plant tray with wheels can be freely moved on house floor, even on the carpet, soil ground and lawn without damage on your floor, and the wheels do not get stuck or locked up. 2-way brakes on thick heavy duty wheels to hold containerized plants firmly....
Check Stock

VANTA SPORTS Triple 10' DIY Powder Coated Rust Resistant 10 Piece Golf Frame Corner Kit Fittings with Threaded Eye-Bolts

  • 10 pieces 1" Diameter Powder Coated Rust Resistant Welded Steel Frame Corner Connector Kit to construct a 10'x10'x10' Golf Hitting Net Frame. Steel pipes are not included and are sold separately at most home improvement or electrical supply stores..
  • Pipes you purchase can be cut to construct a customized frame size to fit your area indoors or outdoors..
  • This kit can also construct a 10' canopy or shelter frame. The baffle tees could also be used to hang advertising banners when used as a festival or craft show frame shelter..
Check Stock

Kyostar 2\ T-Bolt Hose Clamp Adjustable Stainless Steel Titanium Blue Clamp Diameter Ranger for 2 inch (53mm - 61mm)

  • Our T Bolt clamps are made from heavy duty 301 stainless steel and zinc coated nuts with rounded band edges to protect soft hose materials from cuts..
  • The band of stainless steel t-bolt clamps are 0.6mm thick, and 19mm width rounded edge, which won’t damage the hose or pipes..
  • T-Bolt Clamp effective range: 45 millimeter-105 millimeter can adjustable (1.75 inch-3.75 inch)..
  • Superior welded construction, Floating bridge liner..
  • Note: If used this t-bolt hose clamps for industrial and military hose or pipes, please measure the outside diameter of them before purchase..
Check Stock

Tuukka Rask Boston Bruins Signed Autographed Up Close Mask 16x20

  • ALL NHL TEAMS: With all NHL teams from the U.S. and Canada available, your little goalies can have a blast looking like their favorite players between the pipes!.
  • DESIGNED FOR COMFORT: The adjustable backplate ensures a comfortable fit for any youth head size and makes this goalie helmet ideal for all street hockey players.
  • CHROME-WELDED STEEL: Specially designed with a chrome-welded steel cage for premium protection during street-hockey games.
  • QUICK-SNAP STRAPS: This hockey helmet goes on and off smoothly in seconds, thanks to its easy-to-use quick-snap elastic straps.
  • BALL & STREET HOCKEY APPROVED: These hockey goalie masks are not HECC/CSA-certified and are only made for street-hockey play with a 2 ⅝” ball. Not certified for ice hockey or any other type of puck play.
Check Stock

Mophorn Exhaust Header Stainless Steel Long Tube Exhaust Header Polished Manifold Header For Chevy 283 302 305 307 327 350 400 Long Tube Exhaust Header

  • High-quality Stainless Steel: This exhaust manifold has premium quality, made of high-strength polished stainless steel, through an advanced welding....
  • Excellent Performance: Completely welded to against cracking and wearing under high pressure and temperature. Exhaust header collects exhaust gases....
  • Precise Dimension: Tube Diameter: 1 1/2", Collector Size: 3.00". It has a lightweight design. CNC machine flanges with TIG and MIG welded....
  • Easy to Install & Use: Gaskets and other mounting accessories are included in the package, and exhaust pipes can put more power through the wheels to....
  • Direct Fitment: These headers are compatible with 1966-1987 Chevy/GMC SBC 265-350Ci, Pickup Truck/Blazer/Jimmy 2/4WD, capable of adding instant....
Check Stock

Hockeyninja Ronin Hockey Visor with Anti Scratch Coating - Impact Resistant - Universal Helmet Fit - CE Certified (R2)

  • ALL NHL TEAMS: With all NHL teams from the U.S. and Canada available, your little goalies can have a blast looking like their favorite players between the pipes!.
  • DESIGNED FOR COMFORT: The adjustable backplate ensures a comfortable fit for any youth head size and makes this goalie helmet ideal for all street hockey players.
  • CHROME-WELDED STEEL: Specially designed with a chrome-welded steel cage for premium protection during street-hockey games.
  • QUICK-SNAP STRAPS: This hockey helmet goes on and off smoothly in seconds, thanks to its easy-to-use quick-snap elastic straps.
  • BALL & STREET HOCKEY APPROVED: These hockey goalie masks are not HECC/CSA-certified and are only made for street-hockey play with a 2 ⅝” ball. Not certified for ice hockey or any other type of puck play.
Check Stock

Hog Legs LPGmuscle 24 Cable Gym Bar with Revolving Center HAM HOCK Revolution

  • FAT GRIP Cable Machine Bicep Triceps Cable Machin Bar.
  • WELDED STEEL WITH REVOLVING CENTER 1-3/4" ROUND x 24" LONG.
  • 'LIVE ACTION' Swivel Attachment Ring 500# Strong Stainless Steel!.
  • 500# STRONG COMMERCIAL GRADE Welded Steel Tubing with Powder Coat finish..
  • PENNSYLVANIA USA MADE Lifetime Replacement Warranty!.
Check Stock

DynoMax 39510 Stainless Steel Exhaust System

  • COMPATIBILITY -- Designed for Jeep Wrangler JK.
  • see product information for compatibility and engine specs.
  • PERFORMANCE UPGRADE -- Enhance your vehicle’s exhaust system with this kit that can give a 14HP and 12-Lb. Ft. torque improvement.
  • COMPLETE SOLUTION -- Includes DynoMax Super Turbo muffler, 3-in. stainless-steel tips and clamps.
  • EASY TO INSTALL -- Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn’t require specialized fabrication and/or welding.
  • IMPROVED FLOW CAPACITY -- Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power.
Check Stock

LINACAO 1/2/3Pcs Tools Free Copper Union Fitting with Sweat Solder Joint to Male Threaded Connects Compatible with Use Nominal Size Pipes (Size : 1)

  • This hex nipple fitting Compatible with connecting two threaded pipes with same diameters, and it has a hexagonal head Compatible with an increased bearing surface when adjusting the fitting with a wrench..
  • This fitting is made of Brass Compatible with corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • Brass can be connected to copper, Brass, plastic, aluminum, and welded steel..
  • Can be used to connect various pipes, such as air Stone, fuel Stone, water Stone, etc..
Check Stock