Categories

Best Welded U bolt

GenExhaust Universal Generator Exhaust System Double Layer Wall Attachment for 1-1/2" ID Steel tubing

  • All internal facing seams are welded all round to reduce the chance of leakage.
  • Slotted mounting plates for the inside wall and a galvanized u-bolt clamp is also supplied with this kit..
  • The pipe can become extremely hot depending on the tubing length, generator size and workload..
  • Provisions must be made to avoid contact with flammable or non-heat resistant materials..
Check Stock

GenExhaust Universal generator exhaust system double layer wall attachment for 1" ID steel flex tubing

  • All internal facing seams are welded all round to reduce the chance of leakage.
  • Slotted mounting plates for the inside wall and a galvanized u-bolt clamp is also supplied with this kit..
  • The pipe can become extremely hot depending on the tubing length, generator size and workload..
  • Provisions must be made to avoid contact with flammable or non-heat resistant materials..
Check Stock

MARINE CITY Stainless Steel Strong Sturdy Stern 5/8 Inches Stock Fixed Welding Plate Bow Eye Tie Down U Bolt - L 8 Inches for Marine Boat Yacht Accessory Hardware

  • It is made of bright polished exterior finish 304-grade stainless steel, commonly used as deck hardware in highly corrosive marine environments..
  • Dimensions: Overall Length: 8 inch / 204 mm, Thread length:140 mm / 5.5-inch, Distance between centers: 48.3 mm / 1.9-inch, Stock diameter (Cutting thread): 5/8-inch, Maximum tensile strength of 11 tons..
  • Marine City U-bolts may be used where an eye bolt would be too small or extra strength is required..
  • A welded base plate to minimize possible corrosion and provide excellent sealing..
  • Package Content: Supplied with Nuts and Washer..
Check Stock

TORCH 8.5\ Square Extended U Bolts Extra Long 2.5\ wide 9/16\ Ubolt w Hardware

  • FITS: Many applications. Please message us with your make/model and current U bolt size if you have any questions about fitment..
  • CONTENTS: 4x Square U-Bolts (measurements are from inside the bend 8.5" long and 2.5" wide).
  • INSTALLATION: Bolt on kit. U bolts are 8.5" from the inside bend and just over 9" in overall length..
  • Ships Same/Next Business Day. 2-4 Day Delivery. Lifetime Warranty. Dedicated Customer Service. Call or message us with any questions!.
  • NOTES: Please measure your existing U bolts before purchasing to ensure these U bolts are correct for your application. Please message us if you have any questions..
Check Stock

Sysracks - Server Rack - Locking Cabinet - Network Rack - Av Cabinet - 42 U - Rack Mount - Free Standing Network Rack- Server Cabinet - Caster Leveler - Rack Shelf - Cooling Fan - Thermostat - PDU

  • ...84"h) - - Robust Enclosed Rack - Aesthetic And Elegant Look Computer Cabinet Rack - Glass Or Vented Enclosure - 39 Inch Enclosure Overall Depth - Accessories Over $130 Value Included.
  • EASY TO SET UP AND USE - The Network Server Rack Is Easy To Assemble And Use Due To Welded Frame Design And Quality U-mark Mounting Rail Hardware. Video Giude And Pdf-form Assembly Instructions Provided..
  • quick Customer Service - Fast Shipping - Reliable And Quality Rack Cabinet Enclosure -guarantee On All Server Racks.
  • USABILITY AND SAFETY FIRST - 42 U Free Standing Network Cabinet - enclosed cabinet designed for 19 inch standard equipment. Smart technology cabinet with 4 X Cooling Fans / LCD Screen / Thermosensor / Dust-Proof Cable entries guarantee stability and performance of your project. Adjustable Depth Vertical mounting rails will fit any server, AV, security and other telecommunication equipment up to 35 inch overall depth. .
Check Stock

Square U Bolt in Zinc 3/8 x 3 x 7 U Bolt Zn Industrial and Scientific Supplies U Bolts for Boat Trailer Tube Rectangular Wood and Metal Objects 4 Pieces

  • Common Size: the square U bolts measures about 3/8 inch in diameter, 3 inch in width and 7 inch in length, proper for 3 x 3 inch square, suitable size can meet your different fastening needs, please check the size before ordering.
  • Sufficient Quantity: you will receive 4 pack of square U bolts in zinc, including 4 pieces of u bolts, 4 pieces of frame plates and 8 pieces of nuts.
  • Enough quantity satisfy your uses and replacements.
  • Hard Material: the square U bolt adopts carbon steel material, and with zinc plated, sturdy and reliable, with nice rust and corrosion resistance, each bolt can withstand the weight, still perform well in rainy and wet environments.
  • Wide Applications: the U bolts are widely suitable for various fields, such as industry, manufacturing, maintenance, the automotive sector, clothing production, etc., ideal for fastening tubes, woods, trailer, and so on.
  • Tips: It is recommended to use lubricant during installing the U bolts to prevent wear and tear.
  • Use a manual wrench or socket ratchet when installing nuts.
  • Do not use high speed power tools or impact tools to tighten the nuts.
Check Stock

4 Sets 304 Stainless Steel Square U-Bolt Boat Trailer U-Bolts with Washers and Nuts L Heavy Duty U Bolts for Sailboat Trailer Automobiles Trailer Industrial Parts 1/2 D x 3 1/16 W x 4 5/16 Inch

  • Package includes: stainless steel u-bolt set include 4 pieces u-bolts, 8 pieces stainless steel flat washers, 8 pieces stainless steel nylon lock nuts, 8 pieces lock washers, all accessories are made of 304 stainless steel.
  • U-bolt size: 1/2 x 3-1/16 x 4-5/16 inch (D x W x L), thread length: 2-1/2 inches, suitable for 3 x 3 inch square beams and shafts.
  • Stainless steel material: u bolts for boat trailer are made of 304 stainless steel, strong and long-lasting.
  • These 304 stainless bolts prevent rust corrosion, acid corrosion and wear.
  • It's still perform well in rainy and humid seaside environment.
  • How to use: firstly choose the corresponding square U shaped bolt according to the size of the pipe, then drill holes in the connection, and finally lock nut and flat washer.
  • Use a hand wrench or socket ratchet when installing nuts.
  • Do not use an impact or a high speed socket driver.
  • Wide application: square u-bolt is applied to fix or connect the locked parts to rectangular wood and metal objects, such as cars, sailboat trailers, pipe, tube, plumbing and other industrial applications.
Check Stock

Prime-Line 9071931 U-Bolts, Round Bend, 1/4 inch-20 X 1-1/8 inch X 2-1/4 inch - (3/4 inch Pipe), Zinc Plated Steel, (10-pack)

  • STOP: ONLY USE a Hand Socket Ratchet or wrench to run the nuts up and tighten..
  • DO NOT USE an impact or powered socket driver. Ignoring this instruction will cause U-Bolt Galling / Seizing / Breaking / Failure / Expletives / Sawzall. Let's keep it Fun, and Successful..
  • U-Bolt Size: 1/2" Diam x 3- 1/16" Inside Width x 5- 5/16" Inside Height (Length).
  • Attention: When measuring for Your needed Height (Length), add 1" for the nut and washer..
  • Threading: 1/2"-13 with a thread length of 2- 1/2"..
  • U-Bolts and hardware are made out of 304 Stainless Steel..
  • These U-Bolts will fit on 3" x 3" cross members, such as 3" x 3" box steel..
Check Stock

Upper Bounce Trampoline Safety Enclosure Set of Net, 8 Poles & Hardware, Fits 13 FT. Round Frame - Installs Inside Frame

  • Included in the Set: This Upper Bounce trampoline safety enclosure set includes safety enclosure net, 8 heavy duty upper and lower trampoline poles, trampoline pole foam sleeves for poles, 8 trampoline pole caps and 16 u-bolts (2 U-bolts for each pole)..
  • Net for Trampoline: The trampoline net included in this set installs inside the frame. It is compatible with 13ft round trampolines from any brand out there. This trampoline net is tested for its safety and durability to ensure maximum protection..
  • Trampoline Net Poles: This trampoline safety enclosure set comes with 8 heavy duty tarmpoline poles. the trampoline net poles are made from high quality stainless steel which protects the trampoline poles from all types of outdoor weather conditions..
  • Pole Foam Sleeves and Pole Caps: The pole foam sleeves included in this set will protect your kids from getting hurt in case they bump into trampoline poles while jumping. This set also includes trampoline pole caps to cover the top edges of the poles..
  • U-Bolts: A set of 16 U-bolts is provided with this trampoline safety enclosure set. these bolts are used to attach the trampoline poles with the trampoline frame. Each of the trampoline poles uses 2 U-bolts to hold the trampoline poles firmly in place..
Check Stock

Armored Personnel Carrier

  • Tire Fit: This U-bolt type spare tire bracket is suitable for trailer-fitted trailer frames up to 2 inches or 3-4/5 inches wide (up to 4 inches) and can accommodate 15-inch tires. For 4 or 5 lug wheels (bolt style: 4 to 4 or 5 to 4 -1/2).
  • Easy to install: This spare tire mount can be easily installed to secure the tire. Just put the bolt in the trailer's throat and tighten it. The spare tire is installed on the side of the trailer protector..
  • Upgrade double nut design: Prevent the nut from falling off, and don't worry about losing the tire on the road..
  • Durable and rustproof：Our U-bolt trailer spare tire mount is made of thick steel. Can resist deformation. Galvanizing can increase protection against harsh weather conditions.
  • Package：Provide U bolt and 4 lug nuts are supplied.
Check Stock

Red Headed Rebel RHR Ghost Hitch Ball Mount Attachment

  • Ball mount attachments for Red Headed Rebel RHR Ghost cushion hitches..
  • 15 Styles - Drop, dual call, raised, pintle, drawbar, clevis pin along with sway bar tab attachments and more.
  • Drop, standard & raised mounts come with 2" or 2-5/16" bolt on ball. Dual combo ball has a 2" and 2-5/16" balls and is a welded combo ball mount with clear zinc plated finish. The rest are black powder coat finish. The raised, drop and regular ball mounts has a bolted on hitch ball..
  • Dual combo ball has a 2" and 2-5/16" balls and is a welded combo ball mount with clear zinc plated finish. The rest are black powder coat finish. The raised, drop and regular ball mounts has a bolted on hitch ball..
  • Bolt on ball capacities: 20,000 lbs tow & 2,000 lbs tongue weight with 2-5/16" ball & 10,000 lbs / 1,000 lbs with 2" ball.  Draw bar mounts have 1" holes & are NOT for use with hitch ball).
Check Stock

(4) Hot Dipped Galvanized Dipped Square U-Bolts (1/2\ D x 2 1/16\ W x 6 5/16\ L) for Boat Trailer

  • U-bolt Size: 1/2" D x 2-1/16" W x 6-5/16 L, thread length: 2-1/2" inches, suitable for 2" x 2" square beams and shafts, (order Please check the measurement size carefully before).
  • Hot Dipped Galvanized : U-bolts are made of Hot Dipped Galvanized，The white surface is a thick galvanized layer, which enhances the rust and corrosion resistance of the U-bolt..
  • You can get: (4) U-bolts, (8) hexagon nuts, (8) flat washers, (8) lock washers, these additional accessories are also Hot Dipped Galvanized. With these, you can spend less time repairing and more time boating.
  • Tips:Use a hand wrench or socket ratchet when installing the nut. Do not use high-speed power tools or impact tools to tighten the nuts..
  • After-sales service: Our U-bolts provide a one-year warranty service. Please rest assured, if you have any questions, please feel free to send us an email via Amazon. We will solve it for you within 24 hours..
Check Stock

Shocker Hitch Vertical Channel Weld On Tongue Adapter for Trailer A-Frames Completely Welded

  • Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame. Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame..
  • Equipped with 6 Adjustment Holes. Raw Steel. The six bolt hole pattern works great with typical vertical channel bolt on trailer couplers. Actual vertical channel is 3-1/2" x 11-3/4" w/ 2" on center bolt pattern.
  • The outer front is 4" wide, the outer rear is 11" wide. From front to back it measures 7-1/2". Weight Rating: If you are using 2 bolts to attach coupler then its 14,000 lbs if using 4 bolts then 20,000 lbs that also assumes this kit is properly weld onto the trailer and the coupler you are using can handle those respective capacities..
  • Allows you to convert your trailer a-frame to one that accepts Vertical Channel couplers. Welding required for installation..
  • 3 Style to choose from - Completely Welded, Spot Welded & Components Only (2 Sides,Base & Vertical Channel). Made in the USA by Shocker Hitch - Arthur, ND.
Check Stock