Categories

Best Welding Bolt

OCPTY Front and Rear Bumper with D-ring & LED Lights & Winch Plate fit for 2013-2018 for Dodge Ram 1500 (Front Bumper Not for Rebel)

  • [Fit for]:2013 2014 2015 2016 2017 2018 for Dodge Ram 1500.
  • [Winch Plate & D-Ring Shackles]:Built-in winch plate for up to 12,000 lbs. winches. High strength D-ring mounts are welded on. Two 4.75 ton D-ring shackles and black isolators included..
  • [Package Included]:1XFront Bumper,1XRear Bumper,Mounting Hardware as Shown.
  • [Never Rusts]:Front and Rear Bumper have a high quality,Powder coated Black Finish and along with our advanced laser welding technology, prevents rust from occurring..
  • [Bolt-On Installation]:The OCPTY bumper is engineered to be a direct bolt-on installation for your . As a direct fit replacement, this bumper requires no additional cutting, welding, or fabrication for installation..
Check Stock

LPRUIANQ Universal Replacement Truck Bed Parts for Hard Triple fold Tonneau Cover -2* t Bolt, Rear clamp.

  • Contents :4 * t bolt slider, 2 * t bolt, 2 * rear clip..
  • Fitment: Fits Hard Tri-Folding Truck Bed Tonneau Cover or Hard Four-Folding Truck Bed Tonneau Cover, Soft Quad-Fold, Soft Tri-Fold Truck Bed Cover, and so on..
  • Materials: Made of Nylon glass fiber（PA66 GF30） and stainless steel, durability, and stability.T - Bolt welding part, well-made, firm, and reliable, not easy to break..
  • Usage: Easy installation, backup for the replacement..
  • Note: If you have any questions, please contact us..
Check Stock

3.0 Inch 2 Bolt Exhaust Flange Connection Kit Stainless Steel Exhaust Flange and Gasket with 2 Bolts& Nuts 3.0"(77mm)

  • 2-Bolt Exhaust Flange Connection Kit.It is Including 1 Pcs 3.0 Inch Flange , 1 Pcs 3.0 Inch Gasket, 2 Pcs of M10*40mm Flanged Hex Head Bolts, 2 Pcs of Flange Hex Nuts.
  • 3.0" Hole Size: The Hole Size is 3.0 Inch(77mm).it is Pefect fitting Exhaust Pipe/Downpipe Which is the Pipe outside diameter 3.0 Inch(75-76mm).
  • With Oval Hole: Bolt to Bolt distance is 3.6- 5.1 inch (92~130mm),The Slotted Hole munch better to facilitate pipe connection..
  • Stainless Steel Material: The 2 bolt 3.0 " Exhaust Flangle material is made with Stainless Steel 201 provide good strength and corrosion resistance.
  • Exhaust Flange.it is good design to reserve about 3mm thickness for welding port..
Check Stock

XIEKRAB 2Pcs Heavy Duty 2 inch Muffler Clamps Rustproof, 2" Exhaust Pipe Diameter, Black Saddle Style U-Bolt Clamp

  • 【Practical Tool】：Brand XIEKRAB Heavy duty u-bolt clamps exhaust saddle style..
  • 【Material】：Made of high quality industrial steel with black zinc coating on the surface to prevent corrosion and rusting for use in bad weather..
  • 【Durable & Safe】：Designed to ensure a tight, leak-resistant connection, XIEKRAB U-bolt clamps are manufactured from durable and robust material for long service life..
  • 【Easy to Use】：Inside diameter (ID) Applicable pipe size,No welding design, easy to install and dismantle for use and improve efficiency..
  • 【Package Content】 Includes saddle, u-bolt & nuts and one wrench，Carton packing..
Check Stock

Fulton 500320 XP to F2 Adapter Kit for F2 Swivel Mount with 4' Frame

  • Fulton F2 Jack Adapter Plate allows you to upgrade from a Fulton Center-Bolt Swivel Mount Jack to an F2 Series Marine and Recreational Jack.
  • Fits Fulton's patented center-bolt design - used on XP10 and XP15 weld-on jacks.
  • Heavy-duty, cast aluminum mount is tapered, moving wheel closer to center line of trailer frame to optimize castering performance.
  • installs easily - no drilling or welding required.
  • All necessary mounting hardware and complete installation instructions included.
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

Mardatt 8\ 6 Function MIG Welding Pliers, Dual-Sided Gage Standard Metal Gauge Measurement and Tungsten Carbide Scriber for Metal Sheet (3 Pack)

  • What you Get: The welding tool set contains 8” mig welding pliers, metal welding gauge and tungsten carbide tip scriber. 3 pack of weld tool a set will help you work effortlessly. Ideal for Splatter Removal, Cleaning and Removing Rust, Hammering, Tip Removal/Install, Wire Cutting, Nozzle Removal/Install, Wire Draw Out, and More..
  • Multi-Purpose Welding Pliers: The precise tooth pattern provide it strong clamping force, the jaws are very sharper and firmer, which improve efficiency. Multiple jaws for SIX Function: wire cutting, tip removal & installation, nozzle removal & installation, inside & outside nozzle cleaning, grooved tips for drawing wire..
  • Practical Welding Gauges: Made of stainless steel with rust and corrosion resistance for long service time. It has more clear scales and easy to read the data.with laser engraving procession, the scale is clear. And they will not wear out. Dual-Sided Round Wire Gauge, 0-36 American Standard (AWG) and SAE.
  • Ideal for measuring sheet, plate iron and steel, leather, wire, Bolt, screw, ect..
  • Handy Tungsten Cardie Tip Scriber：The glass scriber features a durable tungsten carbide tip and an aluminum body, which is twice as hard as steel, so it can easily handle hardened steel, stainless steel, ceramic, glass an....
Check Stock

Exhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Check Stock

Liyafy 3\ Pure Brass Slide Barrel Door Bolt Heavy Duty Gate Security Lock Latch Gold

  • Quality latch constructed of brass material,multi-layer polished finish,no worry any corrosion, rust and tarnishing,ensuring durability and dependability..
  • Convenience sliding design,bolt locks are provide added security to make your living environment more comfortable..
  • Exquisite concise appearance,sealed welding,thick and reinforced base,not easy to break and deformation,solid and durable..
  • Simple design to facilitate your installation and maintain,mounting hardware and screws included..
  • Slide bolt lock suit for most of doors are applicable,home bedrooms, gate,garages,garden,bathrooms, cabinet, kitchen, office, hotel,so on to save space and organize your space in neat..
Check Stock

Shocker Hitch Vertical Channel Weld On Tongue Adapter for Trailer A-Frames Completely Welded

  • Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame. Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame..
  • Equipped with 6 Adjustment Holes. Raw Steel. The six bolt hole pattern works great with typical vertical channel bolt on trailer couplers. Actual vertical channel is 3-1/2" x 11-3/4" w/ 2" on center bolt pattern.
  • The outer front is 4" wide, the outer rear is 11" wide. From front to back it measures 7-1/2". Weight Rating: If you are using 2 bolts to attach coupler then its 14,000 lbs if using 4 bolts then 20,000 lbs that also assumes this kit is properly weld onto the trailer and the coupler you are using can handle those respective capacities..
  • Allows you to convert your trailer a-frame to one that accepts Vertical Channel couplers. Welding required for installation..
  • 3 Style to choose from - Completely Welded, Spot Welded & Components Only (2 Sides,Base & Vertical Channel). Made in the USA by Shocker Hitch - Arthur, ND.
Check Stock

SURPASSOLAR Universal Replacement Parts for Hard Folding or Soft Folding Truck Bed Tonneau Cover /2pcs* Rear Clamp/Wrench, 2pcs* T-Bolt, 2pcs* Slider for T-Bolt.

  • Included:2pcs* Rear Clamp/Wrench, 2pcs* T-Bolt, 2pcs* Slider for T-Bolt..
  • Fitment: Fits Hard Tri-Folding Truck Bed Tonneau Cover or Hard Four-Folding Truck Bed Tonneau Cover, Soft Quad-Fold, Soft Tri-Fold Truck Bed Cover, and so on..
  • Materials:It is made of Nylon glass fiber（PA66 GF30）, and stainless steel, durable, and stable. T - Bolt welding part, well-made, firm, and reliable, not easy to break..
  • Usage: Easy installation, backup for the replacement..
  • Note: If you have any questions, please get in touch with us..
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

Three T Black Motorcycle Engine Highway Guard Crash Protector Bars Fit for Yamaha V Star Bolt XVS950 XV950 2014-2017

  • » Fitment: For Yamaha V Star Bolt XVS950 XV950 2014-2017. If you have any questions about the fitment details, please just contact us to confirm..
  • » These bars are made of iron in black finish by well welded, to be strong, solid and durable..
  • » Direct replacement of stock one.Bolt-on installation requires no drilling, cutting, welding or other modifications.
  • » Position: Left And Right. Durable and long-lasting..
  • » Designed to protect frame and fairing from contacting the ground in the event of a fall or slide.
Check Stock