300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

Miller 129527 Conn,Tw Lk Insul Male(Dinse Type)50 Series

  • Premium quality Dinse-style insulated cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" diameter pin (25-mm) and 1/2" diameter pin (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

CNSPEED Hammer Lug Crimper Tool, Solid Hammer Crimper for Battery and Welding Cables 16 AWG TO 4/0 Wire Gauge (Blue)

  • Size: Suitable for all wire sizes from 16 gauge to 4/0 gauge..
  • Feature: Spring-loaded plungers help hold the connector ends in place, heavy duty hardened steel material and good construction ensure the hammer battery cable crimping tool will last a long time without rusting..
  • Easy to use: This hammer battery lug crimping tool is faster and better to use than hydraulic crimping pliers, only requires a hammer and solid surface to operate. And it's small enough to be conveniently stored in any size toolbox..
  • Professional Crimp: Ideal for battery and welding cables..
  • Service: Provide 12 months warranty. If you have any questions, please contact us anytime..
Check Stock

Lenco 05335 International Dinse Type Machine Plug Adapter, Male and Female Connection

  • Welding cable quick connector male-female pair with accessories..
  • DINSE style connection. For AWG wires #6-#4 (16-25 sq mm) with 100Amp-200Amp current rating..
  • You get Two (2) quick cable connector pairs 100Amp-200Amp with accessories at this price..
  • Amazon satisfied customer service & fast ship.Please provide a deliverable address..
  • We are manufactory of welding accessories, if you need a large number of accessories. Please contact us!.
Check Stock

RIVERWELD TIG Welding Cable Panel Connector-plug and Socket Dinse Dinze Quick Fitting 4 DKJ35-50 & DKZ35-50

  • TIG Welding Cable Panel Connector Socket Quick Fitting Dinse-Style, Rated Current: 315amp Wire Section: 35-50mm2 Socket Mounting Size:....
  • 1pcs : DKJ35-50 315A Euro Style Cable Connector-Plug(with Black Color).
  • 1pcs : DKZ35-50 315A Euro Style Cable Connector-Socket.
  • 1Pcs DKJ35-50 Euro Style Cable Connector-Plug (with Red Color).
  • 1Pcs DKZ35-50 Euro Style Cable Connector-Socket (with Red Color).
Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

  • ✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
  • ✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
  • ✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
  • ✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
  • ✅5 IN 1:Multi-purpose household and welding repair tool kit.
Check Stock

Hammer Lug Crimper Tool, Huazu Hammer Crimper Wire Terminal Crimper for Crimps Battery and Welding Cables 8 AWG to 2/0 Wire Gauge

  • FEATURES: All steel material, sturdy and durable. Tight riveting, small size and easy to carry. The elasticity of the compression spring acts on the crimping port, so that the port is in contact with the terminal at all times for easy operation..
  • WIRE GAUGE: 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG, 1/0 and 2/0 (American Wire Gauge) cable..
  • EASY TO USE: Adjust the size of the wire terminal crimper according to the wire. The V-shaped channel can fix the terminal in place and prevent it from sliding. Then put the connector and cable under the hammer crimping machine to keep it stable, and finally hit 1-2 times with a hammer to clean crimps. It is recommended to use a larger hammer..
  • CRIMPING TOOL: Hammer Lug Crimper Tool is ideal for batteries and welding cables..
  • PRODUCT GUARANTEE: You can enjoy our first-class service with 12-MONTH Warranty and 24-hour support for customer service. Please feel free to contact us if you have any issues..
Check Stock

EBOOT 20 AWG JST Plug Connector 2 Pin Male Female Plug Connector Cable Wire for LED Lamp Strip RC Toys Battery, 10 Pairs

  • Total cable length: approx. 210 mm/ 8.3 inch.
  • 2 Pin JST connector, one side for plug the other side for welding.
  • Package including: 10 pairs JST plug connector with cable wire (10 pieces female, 10 pieces male).
  • This JST plug connector is suitable for most mini RC helicopter, LED strip light and good for connecting motor, ESC battery.
Check Stock

WeldingCity 3-pk Dinse-Type Twist-Lock Insulated Connector Pair (Male/Female) for Welding Cable AWG #2-1/0 (35-50mm) | Pack of 3 Pairs

  • 4 pairs of premium Dinse-type cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Male connector is with Dinse-type pin of .355" diameter (25-mm small) and pi of 1/2" diameter (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps. 3-pair per package..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

KINGQ Welding Cable Joint Quick Connector Pair DINSE-Style 100Amp-200Amp (#6-#4) 16-25 SQ-MM 2-set

  • Premium Dinse-type insulated cable connector pair (male/female) and female terminal adapter (threaded stud to Dinse male connector) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" pin diameter (25-series) and 1/2" pin diameter (35/50/70-series). 45° angle terminal adapter with 17/32" stud hole and female acceptor for 1/2"-pin male plug..
  • Compatible with Miller 25-70 series Dinse twistlock connectors/adapters and fit other mainstream welders (Lincoln, ESAB, etc.) with Dinse connection: Miller 25-series (small 25-mm, #4-#3, P/N 127836/127835).
  • 50-series (35-50mm, #2-1/0, P/N 129527/129526).
  • 70-series (50-70mm, 1/0-3/0, P/N 134460/136600). Female terminal adapter is compatible with Miller 232728 (50/70-series, 1/2"-pin)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

RIVERWELD TIG Welding Cable Panel Connector-plug and Socket Dinse Dinze Quick Fitting 315Amp (2, DKJ35-50)

  • Cable Panel Connector /Euro Style Cable Connector-plug Fit all TIG Welding and Plasma Cutter Machine.
  • 1pcs DKJ35-50 Connector with Black Color..
Check Stock

Hammer Battery Lug Crimping Tool for 8, 6, 4, 2, 1/0, 2/0, 3/0, 4/0 American Wire Gauge (AWG) Wire and Cable

  • Hammer Battery Lug Crimper for use with 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1/0 AWG, 2/0 AWG, and 3/0 (American Wire Guage) cable.
  • Perfect for crimping battery cables, welding cables and any other wire crimps for your auto or marine project.
  • Lug Crimper is spring loaded and only requires a standard hammer and solid surface to operate.
  • Lug Crimper is made of high quality hardened steel for years of maintenance free use.
  • Compact size! Only 3 1/2 inches tall, allowing easy storage in any size tool box.
Check Stock

9TRADING Replacement Mig Welding Gun Stinger Torch Lead 4 Clarke 130EN 180EN Welder Parts

  • The gun is 10 ft long, and will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
  • There is a gas valve in the handle, so this gun can be used with or without gas..
  • The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..
  • You can see the gas hose, trigger connector, and the welding current cable in the second picture..
  • This gun uses the same Clarke contact tips, gas nozzles, and gas diffusers..
Check Stock