Categories

Best Welding Cable Plugs

Hobart - 500575 AirForce 27i Plasma Cutter

  • Versatile Performance- Multiprocess unit capable of MIG welding 30-140 amps, DC TIG welding 10-120 amps, and Stick welding 25-90 amps..
  • Easy to use- Simple two knob operation for controlling wire feed speed and voltage. Single button allows for easy process selection changes..
  • Compact Design- Lightweight and portable at 34.5 lbs. Conveniently plugs into household 120V power..
Check Stock

20 Pairs/ 40 Pcs Banana Plugs, Closed Screw 24K Gold Plated Banana Speaker Plug Connectors Dual Screw Lock Banana Connector for Audio Video Receiver, Speaker Wire, Wall Plate, Amplifiers, Sound System

  • Package Content: the package comes with 40 banana plugs for speaker wire(20 pairs plugs), the nice workmanship makes them nicely serve you, the quantity is so ample to meet your matching or replacement needs.
  • Dependable and Serviceable Material: each speaker wire connector is made of aluminum alloy, copper and gold-plated as a whole, which is stylish and exquisite, highlighting the quality of the plug.
  • The enclosed design with double screws can isolate the wires to prevent short circuits.
  • Nice Fidelity Design: these speaker banana plugs can be widely applied to in audio or video receivers, amplifiers, sound systems and more, and transmission of each note is clear, giving you a nice using experience.
  • Easily Installed: you just need to insert some bare copper conductors into the holes, the dual set screws can keep the wire connection secure without soldering compatible with 12AWG to 18AWG speaker wires, the speaker cable connectors adopt an integrated welding design, no special tools are needed to use.
  • Wide Application: these 4 mm banana speaker connectors are ideal for speaker wire and center channel speakers, speaker cables, wall plates, home theater, bringing a lot of convenience.
Check Stock

Lincoln Power MIG 140MP Multi-Process Welder TIG One Pak K4499-1

  • Versatile Performance- Multiprocess unit capable of MIG welding 30-140 amps, DC TIG welding 10-120 amps, and Stick welding 25-90 amps..
  • Easy to use- Simple two knob operation for controlling wire feed speed and voltage. Single button allows for easy process selection changes..
  • Compact Design- Lightweight and portable at 34.5 lbs. Conveniently plugs into household 120V power..
Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

  • ✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
  • ✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
  • ✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
  • ✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
  • ✅5 IN 1:Multi-purpose household and welding repair tool kit.
Check Stock

8 Pcs 45 Degree Y Plugs Screw Audio Fork Spade Connector for Speaker Wire DIY 4 Black and 4 Red

  • PACKAGE INCLUDED: 8 x Cables Spade plugs(4 Black+4 Red)..
  • EASY CONNECTION: No welding, 45 Degree angled spade plugs are perfect for any speaker wire connections..
  • DOUBLE SCREW LOCKING: Our 45 degree Y plugs fit tighter on the wires than Banana and will not loosen over time..
  • MORE SAFETY: Not only do spade plugs make it easier to plug in bare wires, but it's also safer this way with no chance of wires crossing creating a....
  • HIGH-QUALITY COPPER: Gold plated connectors ensure perfect signal and quality sound. Spade plugs are designed to be used with amplifiers, speakers,....
Check Stock

Belker Universal 5V DC Power Cable USB to DC 5.5 2.1 mm Plug Connector Tip Charging Cord with Most Frequently Used Interface Type

  • These DC converter connectors are made of premium durable material. Pure copper terminals, handing welding process and 5000 cycle times test..
  • 10 interchangeable DC plugs Tips, which makes it fits most of home appliances. You do not have to worry about finding the suitable adapters when using various devices..
  • All female jack is based on 5.5*2.1 mm. Max. support 3000mA amps. Perfect compatible with Belker whole line universal AC power adapters supplies. Also support 2.0a 2000ma 1.5a 1a 1000ma 500ma 700ma 300ma amps..
  • If your device is with centre negative polarity “-“, please use it with Belker polarity reversed cable together. Search “B07PMHMPMP” to find the cable on Amazon..
  • Belker provides 12-month global warranty period and lifetime friendly after-sale service. Any quality problem, free for new..
Check Stock

LDHTHOPI MIG Welder, 140Amp 110V Gas/Gasless Flux MIG/Lift TIG/Stick 3-in-1 Welding Machine IGBT Inverter Welder

  • 【Easy Control Panel & 3 In 1】LDHTHOPI MIG welder machine has combo MIG (Gas/Gasless) MMA TIG welding mode. The welding machine has included with function switching, voltage control knob and wire speed adjustment knob. With synergic control, automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. And the smart digital display makes the operation easier for you..
  • 【Advanced Technology】This DC inverter digital MIG welder voltage is 110V. Rated output current: 140 Amp. Output current range: 20-160A. Duty cycle: 45%-160A at 40 °C. It adopts the advanced IGBT inverter technology with excellent arc stability. Suitable for welding carbon steel, iron, stainless steel, and other metals. Machine with current display can read the current and voltage. The MIG mode can select flux cored welding wire in 0.024"(0.8mm) and 0.03'(0.9mm), ARC(Stick/MMA) mode fits rods..
  • 【Safety & Protection】The MIG welding machine has a built-in automatic protection function for over-current, over-voltage and over-heating. The welders will automatically shut down when overheated and overload. Also machine energy-saving and Fan cooling system will works when needed, reduce the dust into machine also provide long life us....
Check Stock

KSEIBI 331215 300 Amp Welding Electrode Holder American Design

  • This Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
  • Large 300-Amp provides durability, up to 5/32" inch electrode capacity..
  • Lightweight and easy to operate with newly designed level for good hand clearance and better hold..
  • The high temperature / high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Use KSEIBI electrode holder to connect to the welding cable and con-duct the welding current to the electrode..
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

PreAsion Aluminum Spool Gun Fit Miller 180/300371 Spoolmate 100 Series Millermatic 140 180 211 with 10pcs Contact Tips Welding Torch Welding Machine with 9.8ft Cable DC24V for Professional

  • Spoolmate 100 does not work with the Millermatic Passport, only the Passport Plus [Parameter]： Type：air cooled.
  • Feed diameter welding wire: 0.024~0.039inch.
  • [Feature]: Equipped with four aviation plugs and 10pcs 0.03inch conductive nozzles(Contact Tip).
  • The gun head is made of plastic material,with16ft cables are 20 square.
  • Strong and sturdy filament shell, dustproof.
  • [Use place]: Aluminum Fabrication ,Trailer Fabrication, Sign Manufacturing, Auto and Marine Repair ,and high altitude operation will be used..
  • [Application]: Welding Torches Suit For CO2 Mig Welding Machine，Miller 300371 Millermatic 180 211 Spoolmate 100/ welding machine(please see welder interface on website）.
  • ✍ Please note that applicable to Spoolmate 100 Series. Spoolmate 100 Series :Millermatic 180 211.
  • Fit In order that you can use it directly after purchase and save your time, please compare the interface size of our welding torch with that of your original welding torch before purchase..
Check Stock

4-AWG Heavy-Duty AC Power Inverter Custom Cable Kit USA Cobra CPI-1575

  • Model: COB-1575-WIRE-4-KIT MPN: Does Not Apply.
  • WIRE KIT COMES WITH: 10 FT OF #4 awg Black Welding Cable 10 FT OF #4 awg RED Welding Cable 8 Ft OF #6 awg Black Welding Cable.
  • Features: Temperature Rating -50° C to 105° C Ethylene Propylene Rubber (EPR) Annealed stranded bare copper per ASTM B-172 Ozone, sun, weather,.
  • Country/Region of Manufacture: United States Brand: AC/DC WIRE AND SUPPLY.
Check Stock

AudioQuest Rocket 88 Speaker Cables with SureGrip 300 BFA/Banana Silver Connectors - 10 3.04m - 2-Pack

  • Product:The package include 1pair (set 8 Banana Plugs)，1.5M(4.92ft) PER Wire /OFC Cable.
  • Speaker cable:High purity OFC oxygen-free pure copper speaker cable 600 strands (AWG12), providing better conductivity, lower distortion and better....
  • Banana Plug:Banana Plugs to Banana Plugs, 24K gold-plated connectors and Pure copper buffer tubing for optimal signal transfer.
  • Premium Quality Design:The cable uses a double structure and adopts a completely soft PVC jacket. It has the characteristics of oil resistance,....
  • Professional Grade:Packed with professional grade features, such as gold plated banana plugs, and PVC jacket, you get the appearance of a professional....
Check Stock

WeldingCity 200-amp WP-26FV-25R Flexible Head w/Gas Valve Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Adapter 45V62

  • Premium quality 200-amp air-cooled WP-26 complete TIG welding torch package with 12.5-ft or 25-ft 1-piece EPDM rubber power cable. Shipped as un-assembled..
  • 12-pcs torch package includes: 200-amp air-cooled WP-26 series high quality silicone rubber torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper.
  • brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps)..
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve)..
  • 200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement of TIG welding torch for all mainstream welders on markets, as well as ideal for many other aftermarket or equivalent welders. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING..
  • U.S. based welding and hardware supplier. Strong technical support with experienced custom....
Check Stock