Categories

Best Welding Cable Screw Terminal Connector

GELRHONR 1Ft RCA Male Plug to AV Screw Terminal Cable, Free-Soldering,Phono RCA Cable Audio Adapter to 2 Screw Terminal Female Audio/Video Connector-2PCS

  • ✪ RCA to Screw Terminal adapter Cable:Can extend the length of the RCA Audio male cable and audio signal transmission,connector for RCA to connect the audio and video interface of the device.Such as home theater, background music, converter, etc., for transmitting audio and video signals..
  • ✪ RCA to AV Screw Terminal with Solderless type:Easy to use,stripped about 1/2" of wire end.After that simply loosen the terminal screws with a Phillips screwdriver, insert the cable, and screw it tightly..
  • ✪ Gold-plated design:Gold plated connector makes it durable for using and improve the signal transmission.Our RCA cable audio adapters make perfect transmission effect.
  • ✪ EASY INSTALLATION,Positive +/ Negative marked：Clearly marked, Positive +/ Negative - points are labeled in the black plastic housing with molded letters.Pay attention to the polarity when connecting the wires..
  • ✪ Wide applications: suitable for most audio/video speaker CCTV applications for RCA cable..
Check Stock

420pcs Non-Insulated Ring Terminals & Fork Connector Kit 22-16/16-14/12-10 Gauge Wire Lugs Battery Cable Terminals Wire Crimp Connectors High Temperature T2 Pure Non-Insulated Copper Connector

  • Ring Terminal & Fork Connector Kit Material: T2(99.9% Purity) Copper.As a wire crimp connector, it has strong conductivity and is not easy to corrode.
  • ELECALL selects 18 types of wire connector. Group by ring and fork with three suitable wire type. Model OTA-B: "A" means the wire square(mm²) that this ring terminal or fork connector can hold, "B" means the inner diameter of the ring or fork for screw..
  • Non insulated ring terminals high quality gurantee: producted under UL standard；High corrosion resistance；silver welding wire thickness: Comply with international standard,High temperature battery terminal connectors resistant heavy ring connector.Copper content ≥ 99%, conductivity ≥ 96%, high conductivity, ductility and corrosion resistance,It's a good helper for wire connection.
  • Fork Connector(AWG22-16)-0.12"-30pcs (AWG 22-16)-0.16" -30pcs (AWG 22-16)-0.2" -20pcs Fork Connector (AWG14-12)-0.12" -30pcs (AWG14-12)-0.16" -30pcs (AWG14-12)-0.2" - 20pcs (AWG14-12)-0.25" - 20pcs Fork Connector (AWG12-10)-0.2" -15pcs (AWG12-10)-0.25" ----- 15pcs.
  • Ring terminal(AWG22-16)-0.12"-30pcs (AWG 22-16)-0.16" -30pcs (AWG 22-16)-0.2" -20pcs Ring terminal (AWG14-12)-0.12" -30pcs (AWG14-12)-0.16" -30pcs (AWG14-12)-0.2" - 20pcs (AWG14-12)-0.25" - 20pcs Ring terminal....
Check Stock

EZSync HDMI to Terminal Block Adapter Kit, 2X Pack, Solderless Breakout Board, Plastic, EZSync912

  • The EZSync912 HDMI to terminal block adapter connects all 20 signals(including shielding) from a HDMI connector to two 10-position terminal block connector. The two 10-pin terminal blocks support screw-type wiring with enclosure and cable strain relief suitable for heavy duty industrial wiring applications..
  • Plastic case. Solderless terminal block. Compatible with HDMI 2.0, 1.4 and 1.3. Distance will be depending on cable quality..
  • Each package contains 2x sets of adapter kit. Size: Body-50mm x 23mm x 18mm.
  • Wiring diagram provided in image is for typical installation. The actual wiring could be different depending on your equipment..
  • If you don't know the wiring order on the other end of the cable, you need to ohm it out if you have a meter or cut the other end and re-wire both ends.
Check Stock

zdyCGTime USB 2.0 A Screw Terminal Block Connector Cable USB 2.0 A Male Plug to 5 Pin/Way Female Bolt Screw with Shield terminals Pluggable Type Adapter Connector Converter Cable（30CM/2Packs)(Male)

  • Size:Length（30CM/12Inch)Colour:(Black) Package Quantity:(2packs) Material: Plastic & Metal Features：DIY USB 2.0 A Male Bolt Screw Terminal Pluggable Type Block Connector Cable.
  • Can extend the length of the USB 2.0 A cable,5-pin (way) bolt screw terminal pluggable connector can be plugged into the USB A 2.0 plug, Then connect the socket to the other wires, The length of the USB cable can be extended..
  • Product Applicable Equipment: Computer and other USB interface devices, Data transmission and charge extension function..
  • Wire range: AWG28～16, Pin: 5way/pin, Compact design and reliable connection for the male USB to secrew terminal adapter cable.
  • No soldering required, easy to use, Requires only a screwdriver and a wire stripper to terminate USB cables, Saves time and hassle for installers..
Check Stock

Cerrxian 3.5mm 4 Pole Female Jack Stereo Audio Video to 4 Screw Terminal Female Headphone Replacement Balum Converter Adapter 2-Pack

  • One truth about working with audio, you always need the cable or adapter when you don't have in your toolbox. That's why we choose these....
  • These 3.5mm Stereo TRRS Female Jack to AV 4-Screw Terminal Block Balun Connectors feature a 3.5mm Stereo TRRS Jack on one end and 4-Screw terminal....
  • Screw/solderless type.Use for microphone, earphone, audio video AV PC..
  • Gold plated for maximum signal transfer & durability..
  • It is more convenient to use more quickly without welding..
Check Stock

Glarks 8Pcs 3.5mm(1/8inch) Stereo Audio Balanced Male & Female Jack to AV 3-Screw Video Balun Terminal Adapter Connector

  • ★ What you get: In this set, it include 4pcs male and 4pcs female jack to AV 3-screw video balun terminal adapter connector total 8pcs well packed in a plastic box, easy to store.
  • ★ Material: They are made of high quality copper and plastic, with gold plated for maximum signal transfer & durability..
  • ★ Model: TRS( 1-Tip/1-Ring/1-Sleeve), Stereo, 3 Pole 3.5mm 1/8 inch male and female jack..
  • ★ Feature: They are screw/solderless type, it is more convenient to use more quickly without welding. You can just use stranded or solid core wire and a small screw driver to create custom wiring jigs..
  • ★ Application: These male and female terminal-block audio connectors are matched well, mainly used for microphone plug, earphone plug, can also be used for CCTV camera applications, black molded plastic construction..
Check Stock

Poyiccot 3.5mm Speaker Wire Adapter, 3.5mm (1/8") 4 Pole Stereo TRRS Male Jack to AV 4 Screw Terminal Block Balun Connectors Cable 30cm (3.5mm M/ 4pin)

  • Speaker Wire to 3.5mm Cable with Connectors 1: 3.5mm 1/8" TRRS (4-Pole) Male jack, Connectors 2: AV 4-Pin Screw Terminal Block jack,please note: Did not when when attached to wifi projector.
  • 3.5mm screw terminal cable,connecting single wires with open cable heads to your 3.5mm jack..
  • 3.5mm 1/8'' trrs cable, it has four total conductors - three signal and a ground as opposed to a more common stereo jack's two..
  • No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. Wiring diagram: PIN 1 - red wire.
  • PIN 4 - black wire. OMTP standard: PIN1 - Left channel.
  • PIN 4 - Ground. CTIA standard: PIN1 - Left channel.
  • 3.5mm trrs plug cable is more convenient to use more quickly without welding, and you can use the 22-18 gauge to connect..
Check Stock

200 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (15 FEET)

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D..
  • Electrode Holder compatible with AF-3. Constructed with Heavy Duty Nylon body. High conductivity jaws and cable connectors. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4"..
  • Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
  • RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
  • Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..
Check Stock

RCA Plugs for Speaker Wire,Iskueal RCA to AV Screw Terminal Connector, Phono RCA Male Plug Solderless Converter Audio/Video Speaker Wire Connectors Solderless Adapter(12 Pack)

  • 【Solderless Type】Solderless Rca plugs for speaker wire,No electrical tap, no splicing, no crimping, only a small screwdriver..
  • 【Easy to use】RCA to AV Screw Terminal Connector,360 degree grip treads help easy plugging and unplugging, then screwed down completely..
  • 【Scenes to be used】Speaker wire to rca adapter，Phono RCA Plug TO AV Screw Terminal Plug Connector CCTV Video AV Balun..
  • 【How to use】Using this RCA Male Terminal Connector to connect the audio/video interface of the device, such as the security wiring, monitoring equipment, home theater, background music, converter, etc., for transmiting audio and video signals..
  • 【What you get】6 pair (12 Male) RCA to AV Screw Terminal Connector, our worry-free 12-month warranty and friendly customer service..
Check Stock

Tnisesm/60pcs 2 Pin & 3 Pin 5mm/0.2inch Pitch PCB Mount Screw Terminal Block Connector (Can be Spliced) TN-T03G

  • Product Type: Boxed 2 pin & 3 pin Screw Terminal Block Connector, with a phillips screwdriver..
  • Package include: 40pcs x 2 Pin Screw Terminal Block Connector.
  • 20pcs x 3 Pin Screw Terminal Block Connector.
  • 1pcs x phillips screwdriver. All packed in a plastic container for easy use..
Check Stock

Tnisesm/70pcs 2 Pin & 3 Pin 5mm/0.2inch Pitch PCB Mount Screw Terminal Block Connector (Can be Spliced) TN-T03B

  • Product Type: Boxed 2 pin & 3 pin Screw Terminal Block Connector, with a phillips screwdriver..
  • Package include: 60pcs x 2 Pin Screw Terminal Block Connector.
  • 10pcs x 3 Pin Screw Terminal Block Connector.
  • 1pcs x phillips screwdriver. All packed in a plastic container for easy use..
Check Stock

Screw Terminal Block Breakout Shield Module for Arduino UNO R3

  • Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Uno module..
Check Stock

Hammer Lug Crimper Tool, Huazu Hammer Crimper Wire Terminal Crimper for Crimps Battery and Welding Cables 8 AWG to 2/0 Wire Gauge

  • FEATURES: All steel material, sturdy and durable. Tight riveting, small size and easy to carry. The elasticity of the compression spring acts on the crimping port, so that the port is in contact with the terminal at all times for easy operation..
  • WIRE GAUGE: 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG, 1/0 and 2/0 (American Wire Gauge) cable..
  • EASY TO USE: Adjust the size of the wire terminal crimper according to the wire. The V-shaped channel can fix the terminal in place and prevent it from sliding. Then put the connector and cable under the hammer crimping machine to keep it stable, and finally hit 1-2 times with a hammer to clean crimps. It is recommended to use a larger hammer..
  • CRIMPING TOOL: Hammer Lug Crimper Tool is ideal for batteries and welding cables..
  • PRODUCT GUARANTEE: You can enjoy our first-class service with 12-MONTH Warranty and 24-hour support for customer service. Please feel free to contact us if you have any issues..
Check Stock