Best Welding Caps 2

Cotton Doo Rags Motorcycle Dew Rags Black Cycling Skull Cap Bandana Head Wrap Sweat Hard Hat Helmet Liner Chef Welder Welding Rags for Men and Women (Black Pack)

• Cotton Doo Rags. 4 pcs cotton black doo rags packed into 1 package, 4 season adjustable cycling hard hat sweat helmet liner for men and women..
• Doo Rag: Cotton cooling motorcycle do rag head wrap bandana hats. Say goodbye to sweat and hair getting into your eyes. This cotton skull caps absorb sweat, keeping moisture out of your eyes and face so you can stay cool..
• Biker Skull Cap Rags: Cotton helmet liner beanie hat can be used under your cycling helmet skull caps. It is breathable, adjustable for cycling, motorcycle, running, pretied chef hat, scrub working hat, pirate head wraps, welding hat, chemo caps, chef do rags, welder welding rags ..
• One Size Fits Most: Cooling dew rag skull caps with straps on the backside that can tie back, you can tie the straps to fit you in the most comfortable way, no need to worry about the wind will blow off your cool skull doo rags..
• Machine Washable. Easy to care, but no shrinkage, no fading, no pilling. Lightweight hard hat skull cap wraps would be an ideal gift for your family and friends..

RIVERWELD Fashion Style Welding Caps for Welders Pure Cotton

25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″

• MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
• ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
• PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
• APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
• crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
• SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....

WeldingCity 3-pk Dinse-Type Twist-Lock Insulated Connector Pair (Male/Female) for Welding Cable AWG #2-1/0 (35-50mm) | Pack of 3 Pairs

• 4 pairs of premium Dinse-type cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
• Male connector is with Dinse-type pin of .355" diameter (25-mm small) and pi of 1/2" diameter (35-50mm, 50-70mm and 70-95mm)..
• Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
• All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps. 3-pair per package..
• U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

• MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
• ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
• PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
• APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
• crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
• SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....

WeldingCity 200-amp WP-26FV-25R Flexible Head w/Gas Valve Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Adapter 45V62

• Premium quality 200-amp air-cooled WP-26 complete TIG welding torch package with 12.5-ft or 25-ft 1-piece EPDM rubber power cable. Shipped as un-assembled..
• 12-pcs torch package includes: 200-amp air-cooled WP-26 series high quality silicone rubber torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper.
• brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps)..
• Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve)..
• 200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement of TIG welding torch for all mainstream welders on markets, as well as ideal for many other aftermarket or equivalent welders. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING..
• U.S. based welding and hardware supplier. Strong technical support with experienced custom....

KINGQ Welding Cable Joint Quick Connector Pair DINSE-Style 100Amp-200Amp (#6-#4) 16-25 SQ-MM 2-set

• Premium Dinse-type insulated cable connector pair (male/female) and female terminal adapter (threaded stud to Dinse male connector) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
• Insulated Dinse-type male connector is with .355" pin diameter (25-series) and 1/2" pin diameter (35/50/70-series). 45° angle terminal adapter with 17/32" stud hole and female acceptor for 1/2"-pin male plug..
• Compatible with Miller 25-70 series Dinse twistlock connectors/adapters and fit other mainstream welders (Lincoln, ESAB, etc.) with Dinse connection: Miller 25-series (small 25-mm, #4-#3, P/N 127836/127835).
• 50-series (35-50mm, #2-1/0, P/N 129527/129526).
• 70-series (50-70mm, 1/0-3/0, P/N 134460/136600). Female terminal adapter is compatible with Miller 232728 (50/70-series, 1/2"-pin)..
• All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
• U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

• MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
• ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
• PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
• APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
• SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..

10-PACK Welding Protective Lens Replacement 4.5 X 5.25 inch 114 mm x 133 mm Transparent Cover Lens Cover

• 10 pack transparent cover lens for welding helmet.
• In order to make your helmet more suitable for welding, the lens cap should be replaced when necessary..
• Before installing it on the helmet, be sure to tear off the plastic caps on both sides of the surface..

10-PACK Welding Protective Lens Replacement 4.33 X 3.54 inch (110 mm x 90 mm) Transparent Cover Lens Cover

• 10 pack transparent cover lens for welding helmet.
• In order to make your helmet more suitable for welding, the lens cap should be replaced when necessary..
• Before installing it on the helmet, be sure to tear off the plastic caps on both sides of the surface..

The Lost Explorer: Finding Mallory on Mount Everest

• This third function kit allows you to add an electronically controlled hydraulic function to your tractor or skid loader without the need for expensive factory add-ons..
• 1/2" Agricultural Couplers, Poppet, Male & Female, 1/2" NPT w/ Caps.
• This 3rd function valve kit is powered by the power beyond port of your existing loader valve which will allow you to use multiple functions at the same time (i.e. curl bucket and close grapple)..
• Kit includes joystick handle that replaces your existing handle and has 2 integrated momentary push button switches so you can open and close your cylinder with a push of a button..
• The valve can be installed on any equipment that has a power beyond port on it pending the flow is less than 15 GPM. Includes a durable mounting bracket that can be mounted to your machine with bolts or welding..

Peastorm 2 Inch Flexible Exhaust Tubing, 2' x 7' Stainless Steel Flex Pipe Exhaust (Three-layer Thickening)

• SIZE: 2" ID inlet/outlet, 7" overall length, 6" visible braid length..
• MATERIAL: T304 stainless steel double braid / T409 stainless steel end caps..
• FEATURES: Multilayer stainless steel structure, really durable, please rest assured to use..
• FUNCTION: Vibration and nose reduction, this flexible pipe can be bent slightly to reduce stress, but it cannot be turn..
• INSTALLATION: Universal, this product needs welding installation, and professional installation is strongly recommended..

FLYBIRD Folding Flat Bench, Sturdy Lightweight and Space-saving Bench Press Flat Weight Bench, Easy to Assemble

• 【Strict Safety & Quality Control】Excellent welding and good construction make the exercise bench more durable and solid. Dual locking mechanisms provide good security when extended for use and a tight lockup of the legs when folded. The legs are angled outward with perfect welds of joints for maximum stability..
• 【Stable Embedded Fixed Legs】Legs of this bench are assembled differently from other flat benches. The base is embedded in the leg rod and fixed with 3 solid screws, which makes the leg more tightly fitted, stronger and better stressed. It is not easy to create gaps and shake, and not easy to break..
• 【Easy Installation & Lightweight】FLYBIRD Flat Weight Bench can be assembled quickly in 3 mins with all necessary tools provided. It is lightweight and easy to move around in your room, garage or basement. Great addition to your home gym that doesn't take up much space..
• 【Durable & Comfortable】Made of high-quality thick steel, this FLYBIRD Weight Bench can hold over 600 pounds and is durable for years of daily exercise. The 2.5in thick cushion is soft and well-padded to ensure you a comfor....