Categories

Best Welding Electrode E7018

S7 200Amp MIG Welder,110V&220V 3 in 1 MIG&ARC&Lift TIG Gas/Gasless Inverter Multi-Process Dual Voltage Welding Machine

  • ️★Powerful Welding Capability: Up To 200A Output Current That Can Weld Mild Up To 5/32 Inch (4.0mm) Plate.MAX 5 Pound Rolls Of Wire.030"(0.8mm) With Solid Core Wire, And .035" (0.9mm)With Flux Core Wire.Can Handle E7018 Basic Electrode.
  • ️★Complete Welding Kit: Includes MIG Gun(2.8M), Ground Clamp and Holder (2M), 220V to 110V Adapter, Drive Roller Wheel, Contact Tips, Gass Nozzles, and Welder Operation Manual. Processes recommended for MIG-Cast Iron, Copper, Brass, Titanium, Magnesium Alloys. Flux Cored- Aluminium, Cast Iron, Copper, Brass, Titanium..
  • ️★Intuitive Synergic Design: Synergic Control with automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. The MIG-200 is capable of true lift TIG (TIG Lift Torch not included) welding as well as stick welding..
  • ️★Safety Features: Automatic protection function for over-current, over-voltage, and over-heating..
Check Stock

AZZUNO 135 Amp MIG Welder, 3 in 1 Multiprocess Welder 110V Flux Core Welder Flux MIG/Lift TIG/Stick Welding Machine Synergic Control IGBT Inverter Welder (volts, 110)

  • Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders..
  • Multi-functions in one machine: Suitable for MMA, Lift TIG, flux MIG..
  • Weld up to .030″(0.8mm) and .035″ (0.9mm)with flux core wire.Can Handle E7018 basic electrode..
  • Powerful And Safe Machine:This 135A Welding machine can weld mild up to 3.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe..
  • This Flux Core Welder fits .030″(0.8mm) &. 035″ (1.0mm) flux core wire. ARC mode fits rods: E7018, E6013..
Check Stock

Mini Welding Machine 110V Plug, 250A Stick MMA Welder Machine IGBT Digital Smart VRD Hot Start with Wire、Tongs, Ground Wire, Clip, Mask and Gloves.fits Below 3.2mm Welding rods

  • Mini Welding Machine capable of welding mild steel, carbon steel, stainless steel and cast iron.can handle E6010 cellulose electrode, is ideal for AWS E6010 E6011 E7018 E6013 of 1/16"-1/8"(1.6mm-3.2mm), and E40 series electrodes。.
  • The Miuezuth MINI arc welding kit has multiple protection mechanisms to improve the safety factor, the insulation protection level is "F", and the enclosure protection level is "IP21", which can ensure your safe use. With overheating and overcurrent automatic protection. This small welder is very easy to use, even a novice can use it..
  • The Miuezuth welding machine adopts the most advanced IGBT technology, the efficiency reaches 85%, and the power factor is 0.93. The miniature welding equipment reduces the loss of copper and iron, which is very energy-saving, the energy optimization effect is remarkable, and the welding efficiency is significantly improved..
  • The Miuezuth ARC Portable Welder features an easy-to-carry carrying strap, compact and lightweight body, and a colorful hard carton packaging for easy storage and portability. Whether you work indoors or out, this welding machine is your go-to welding tool..
  • Every Miuezuth IGBT rod stick welder machine is inspected before leaving the factory to ensure that it meets the hig....
Check Stock

GZ GUOZHI Welding Machine Handheld, 110V Portable ARC Welder Hand Held Welder Machine, 130Amp Digital Display IGBT Inverter with Welding Tool Set

  • ...【Best Choice for Beginner】: Handheld ARC welder with built-in current digital display show 20-130, and built-in hot start function, quick arc starting, Easy work with new welders or users..
  • 【Advanced Technology】: This welder ideal for E6011, E6013, E6014, E7018 and welding rods below 1/8 inch. It can weld 10 electrodes in a row without protection, with high duty cycle..
  • 【Dual-Voltage & High-Quality Accessories】: 20A-120A adjustable current, 90V-140V wide-voltage design, unafraid of the voltage fluctuations. Included: toolbox, 10-feet 500A Work Clamp Assembly, high quality auto darkening welding glasses, welding gloves, 5 pieces of electrode 3/32 inch, etc. The use of high-quality accessories, durable and not easy to damage..
Check Stock

S7 200Amp MIG Welder,110V&220V 3 in 1 MIG&ARC&Lift TIG Gas/Gasless Inverter Multi-Process Dual Voltage Welding Machine

  • ️★Multi-Functions In One Machine: IGBT Full 30-200Amp(Max)With Digital Display, Reliable Quality And Stable Performance.Suitable For MMA, Lift TIG, Flux MIG, Gas MIG,Big Enough To Handle 2 To 10 Pound Rolls Of Wire.
  • ️★110V/220V Powerful Machine: Up To 200A Output Current That Can Weld Mild Up To 5/32 Inch (4.0mm) Plate.MAX 5KG Rolls Of Wire.030"(0.8mm) With Solid Core Wire, And .035" (0.9mm)With Flux Core Wire.Can Handle E7018 Basic Electrode.
  • ️★Include:MIG Gun(2.8M), Ground Clamp And Holder (2M),220V To 110V Adapter , Drive Roller Wheel,Contact Tips,Gass Nozzles，Welder Operation Manual . Processes Recommended-MIG-Cast Iron,Copper,Brass,Titanium, Magnesium Alloys. Flux Cored- Aluminium, Cast Iron,Copper,Brass,Titanium.
  • ️★Synergic Control,Automatic Change Of The Voltage & Wire Feeding Speed By Adjusting The Amperage Or Choosing Different Thicknesses.The MIG-200is Capable Of True lift TIG(Need Buy Extra Tig Lift Torch,Not Included Inside Product) Welding As Well As Stick Welding ,The MIG-200 Is An Intuitive Synergically Designed MIG/MAG/ Flux Core/ARC/Lift TIG Welding Machine Safety, Automatic Protection Function For Over-Current, Over-Voltage And Over-Heating.
Check Stock

Oumefar Welding Electrode Clamp, 400 Amp Twist Type Holder Welding Electrode Rod Holder Welding Electrode Twist Type Full Copper (Black)

  • COMPACT DESIGN ---- Welding electrode holders have strict quality control and quality assurance, compact design, small size, and the handle conforms to ergonomic design, and the work experience is more labor-saving..
  • FAST AND CONVENIENT ---- Type Holder Welding Tool has excellent workmanship and practicality, 400~500A universal, welding electrode clamp is more convenient to choose welding rod, which will help you to weld materials quickly and conveniently..
  • USED FOR ---- The welding Twist Type Full Copper holder adopts advanced technology and exquisite craftsmanship, and welding electrode clamp is not hot for long-term welding. Welding electrode clamp is used as a welding electrode holder for various rod electrodes..
  • WELDING ELECTRODE CLAMP ---- Type Holder Welding Tool have 1 x electrode holder, 1 x hex wrench, 1 x spacer and 1 x spacer post in the package. You can choose from black and yellow to meet your needs..
  • SERVICE ---- We launch products that meet your needs, and you will get our 100% problem-free guarantee. Customer's smile is our first goal,if you have any question,....
Check Stock

KICKINGHORSE A220 CSA/US Certified ARC Welder 240V. High Power High Rating 220A 40K Hz IGBT Welding Inverter Optimized for Generator / Extension Cord. Ideal for Jobs Where High Reliability Required

  • 【STRONGEST IN THE CLASS】220 amp rated output @ 25% duty cycle at 170F (40°C) ambient temperature. Burn 3/8 inch plate in single pass, run 3/16 rod with no stress. Handles E6013, E7014, E7018 or E6011 electrode, suitable for mild steel, cast iron, stainless steel as well as hard surfacing..
  • 【GENERATOR FRIENDLY】Maintain the same stable performance at 160V to 270V input voltage, A220 is optimized for dirty power and fluctuating voltage, build to run off generator or weld on-site. Excellent all position welding with Long extension cable..
  • 【PUT SAFETY FIRST】CSA/US approved - 100% safe and legal use both at workplace and home. The authenticity of the rated output amperage and duty cycle of all KickingHorse welding inverters are certified by CSA/US. No worry for fake specs anymore..
  • 【SMOOTH ARC IGNITION】Unbeatable 76-volt open circuit voltage (OCV), outperform all the transformer welders in the market, provides excellent arc strike performance at rust surface..
  • 【WORRY-FREE WARRANTY(need activate)】This product is covered by KickingHorse 1(one) year manufacturer guarantee(need active)S. We provide local customer service in US. You are welcomed to contact us anytime if you have any questions or concerns..
Check Stock

Forney 30701 E7018 Welding Rod, 3/32-Inch, 1-Pound

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
  • Not recommended for use with low open circuit-Voltage OCV power sources.
  • Excellent for tack welds and out of position welding.
  • Ideal for general fabrication of cold roll steels.
Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

KSEIBI 331215 300 Amp Welding Electrode Holder American Design

  • This Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
  • Large 300-Amp provides durability, up to 5/32" inch electrode capacity..
  • Lightweight and easy to operate with newly designed level for good hand clearance and better hold..
  • The high temperature / high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Use KSEIBI electrode holder to connect to the welding cable and con-duct the welding current to the electrode..
Check Stock

SPRIGHOLLY 300Amp Electrode Holder Copper Plier Electrode Clamp of Welding Machin Stick Rod Suitable for ARC Stick/MMA Welding Machine (300A)

  • ★Electrode Holder can be used for 300A..
  • ★Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode. grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions..
  • ★MATERIALS:Forging brass.PACKAGE:1 electrode holder included..
  • ★Constructed for long life and dependability.
  • ★Suitable for ARC Stick/MMA Welding Machine. Hand Stick welding jobs..
Check Stock

Jacazooy Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable

  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use..
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth..
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion..
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force..
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error).
Check Stock

Denso (4702) IK20TT Iridium TT Spark Plug, (Pack of 1)

  • Larger spark translates to more power and superior fuel economy.
  • 0.4 mm iridium center electrode, world’s smallest diameter that maximizes firing potential.
  • 0.7 mm needle tip ground electrode, promotes higher spark energy and less heat quenching.
  • DENSO patented 360 degree laser welding process, ensuring exceptional quality bond and structural strength with the iridium center electrode..
Check Stock