Best Welding Fitting - TopShopReview.com

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

【Hight Quality & Sturdy Argon Regulator with Hose】Argon flow gauge regulator's body is made of high-quality brass, being sturdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one u....

Check Stock

Siglent Technologies SDG1062X Series Dual-Channel Function/Arbitrary Waveform generators

【Specifications】Voltage Supply: 9-12V DC Input.
Input Distortion: less than 1% (at 1KHz).
【welding steps】The welding installation considerations, follow these steps: First,the components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.Then welding IC socket, terminal blocks, finally power socket, adjustable potentiometer..
【Debugging steps】After completion of welding on IC, XR2206, you need to pay attention to the direction of IC, or insert the might damage the chip! Check IC for errors, if any, please correct in time..
【Power】 Insert the power supply, power supply for 5.5 x 2.1 port, inside and outside is negative polarity.
Fitting for 9-12 v power supply voltage, and the waveform may not be stable for more than 12V..
【Please note】these are DIY kits, you need to follow the welding steps in our description and complete the final installation..

Check Stock

Weldcote ARG14X10 Hose, Argon, 10 ' with Inert Gas Fitting

10' Insert Gas Hose for welding applications.

Check Stock

WISEPRO Drop Forged MIG Welding Pliers,8 Inch Multi-Purpose Welding Plier for Cutting Welding Wires,Hammering and Removing Spatters

Durable Forged Carbon Steel-the MIG pliers are made from premium forged carbon steel which promotes hardness,toughness and long-lasting performance..
Extra Sharp Cutting Edge-we use CNC machines to guarantee the precision of welding pliers in manufacturing processes and this is the reason why our welding tools are sharp and durable..
Comfortable Grip Handles-designed with a soft handle and a loading spring can distribute the fatique generating from long period use and improve fit with hands..
Multifunction-the welding tools can be used for cutting wires,removing and installing tips and nozzles, cleaning splatter,drawing out wires and hammering nails..
Suitable Crowd and Applicable Place-the MIG welding tools are fitting for professional welders and amateurs.Ideal for workshop,factory,garage,farm and home..

Check Stock

SONNLER Argon/CO2 Regulator Flow Meter Compatible With 6.6FT GAS Hose Welding Gas Regulator For CGA-580 Mig Tig Welder Accessories

【Premium Quality Argon Regulator】SONNLER argon flow gauge regulator made of premium durable brass, can withstand harsh environments and has a longer life, won't rust, won't leak, improve your welding skills..
【Wide Application】Ideal for CGA 580 tank fitting, this gas pressure regulator/flowmeter can be used with argon, helium, and CO2 gas tanks (CGA-580 inlet). It's compatible with Miller, Lincoln, Hobart, and most other TIG welders, apply to welding,cutting, chemical, and electronics industries..
【Accurate& easy to read】Adjustable from 0 to 60 cfh (cubic feet per hour), this argon regulator's gas flow is indicated by a ball that moves up and down in the flow tube. The easy-to-read bottle pressure gauge shows how much gas is left in the tank (range 0 to 4000psi). It fits both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.It also comes with a standard 1/4" barbed fitting ..
【Two Connection Ways】You can choose the connection method according to your needs..
【7*24 after-sales service】You'll receive 1 x Argon/CO2 flow meter gas regulator, 1 x 6.6 ft hose, and a 30-day warranty. If there is a problem, please feel free to contact, we have professional engineers to provide support..

Check Stock

Hilangsan 1.5\ Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle

【Welding-Free Design】Only need to drill a 41 mm hole in the kettle, then the 1.5" TC bulkhead can be installed on the most brew kettle without welding. Add a TC port to your brew kettle easily..
【304 Stainless Steel】The 1.5 inch bulkhead fitting is made of 304 stainless steel, anti-rust, high-temperature resistance, high-pressure resistance. The Polishing treatment makes the surface look more refined..
【Food Grade O-Ring】A high-temperature resistant silicone O-ring is included. The O-ring has the perfect thickness and density to properly seal on the curved face of a brew kettle without leaking..
【Applicable Size】This bulkhead compression fitting is suitable for 1.5 inch triple clamp. It is suitable for coke kegs, soda kegs, beer kegs, kettles, etc. as small as 12 inches in diameter..
【Quality Service】We are committed to providing you with high-quality and reliable products. If you have any questions, you can tell us at any time. We will definitely solve it for you!.

Check Stock

(2 pack)Hilangsan 1.5\ Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle

【304 Stainless Steel】The 1.5 inch bulkhead fitting is made of 304 stainless steel, anti-rust, high-temperature resistance, high-pressure resistance. The Polishing treatment makes the surface look more refined..
【Welding-Free Design】Only need to drill a 41 mm hole in the kettle, then the 1.5〃TC bulkhead can be installed on the most brew kettle without welding. Add a TC port to your brew kettle easily..
【Food Grade O-Ring】A high-temperature resistant silicone O-ring is included. The O-ring has the perfect thickness and density to properly seal on the curved face of a brew kettle without leaking..
【Applicable Size】This bulkhead compression fitting is suitable for 1.5 inch tri clamp. It is suitable for coke kegs, soda kegs, beer kegs, kettles, etc. as small as 12 inches in diameter..
【Quality Service】We are committed to providing you with high-quality and reliable products. If you have any questions, you can tell us at any time. We will definitely solve it for you!.

Check Stock

Flip-Up Front Welding Goggles Safety Eye Protection Welder Goggles with 50 mm Lens Protective Glasses Used for Welding Soldering Torching Brazing & Metal Cutting

➤Quality: Soft PVC opaque green frame, ABS material. High quality welding goggles to protect your safety..
➤Comfortability: The frame has 6 black venting holes, which are then fixed by elastic bands. It is easy to wear and can be worn by people wearing....
➤Specs: The lens has three layers, the inner and outer layers are 1.0 x 50 mm PC transparent lenses, and the middle layer is 2.0 x 50 mm green....
➤Design: The Welding Goggles with Easy Flip-up Dark Shade and Air Vents, Straps around your head with the adjustable Fitting Band, Sealing the eyes....
➤USES: Use it when Oxygen-Acetylene Welding, Torching, Soldering, Brazing, Metal Cutting or Sandblasting and all type of industrial work,....

Check Stock

Yeswelder Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

Wide Application：Has CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2Tanks. Ideal choice for MIG TIG welding, chemical and electronics industry.
Accurate Gas Flow Gague：The Square flow tube reads from 0 - 60 CFH, which is indicated by a ball which moves up and down in the flow tube.And has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI. Easy to read, accurate.
Multiple Outlet：Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
Design：Combination of regulator and flow meter.
Two Connection Ways：You can choose the connection method according to your needs.

Check Stock

findmall CGA 540 Oxygen Regulator for Welding Gas Gauge 145PSI Delivery Range

Durable Material: The regulator is made of Forged brass, durable and reliable to use. (Random delivery in blue and green).
Dimension: 9/16Inch - 18 LH type B-B outlet fitting connect to hose..
Parameter: Max inlet pressure 3000psi, delivery pressure 0-145psi..
Safety: It can accurately debug pressure, safe and practical..
Application: 9/16Inch - 18 LH type B-B outlet fitting connect to hose, accurate control of oxygen flow during gas welding..

Check Stock

TerraKelvin Shade 10 Auto Darkening Welding Lens, True Color Technology, 2×4.25″ Horizontal Auto-Darkening Filter Lens for Pipeliner Welding Hood

HD LCD blocks 95% of UV and infrared radiation at all times- even when the auto-darkening lens is not activated..
2 light Sensors are optimized to fit for most of the sunny regions in continental USA, and set to instantly detect arc struck and trigger the LCD into dark shade in 0.15 to 0.20ms. False flickering is minimized..
Retro Fitting most 2×4 filter welding helmet. Place the protective cover plates when installing and make sure the solar panel facing outside..
Dual Power Source: Lithium + Solar cells. Promise welders top safety, quality welding, and excelling productivity. Your comments, and experience in different welding modes, especially TIG, are extraordinarily helpful to other welders..
100% Satisfaction Guarantee. TerraKelvin provides options of replacement or refunds for any shipping damage, or any reported issues of Poor Visibility, Flickering, Brighter Shade, etc..

Check Stock

10\ Safet Gloves Cow Split Leather Work Driver Garden Welding Gloves Pack of 2 - Grey

Deerskin Leather Work Gloves - 100% Genuine deerskin leather, nature tanning, comfortable and durable. High quality thick deerskin material, superior abrasion and puncture resistance, protect your hands from cuts and scratches..
Forge Welding Gloves - Fire Resistance heavy duty deerskin and fireproof aramid fiber thread, meet NFPA2112, EN11612, EN11611. Perfect protection for your hands when welding or forging or other high temperature work..
Heavy Duty Work Gloves - Details: Soft fitting and thick deerskin material, excellent stitching process, ergonomic curved design, make heavy duty work gloves more comfortable. Foldable and not deform. Adjustable wrist design, easy for on and off, and dust stop during workplace..
Multi-Purpose Use Work Gloves - Perfect Fit for men & women, these deerskin leather work gloves ideal for Construction, Yardwork, Driver, Gardening, Farming, Landscaping, DIY projects, wood cutting, welding, BBQ, camping, animal handling, etc...
SATISFACTION GUARANTEED - If any leather work gloves not perform to your satisfaction due to a material defect or craftsmanship defect within 90 days, we will replace it for you or provide a full refund. If you have any questions, please feel free to contact us..

Check Stock

Dixon B28BMP-R150 Stainless Steel 316L Sanitary Fitting, Clamp True Y, 1-1/2\ Tube OD

Wye ("Y") with three openings for connecting and branching three pipes.
Fitting clamps to tubes on all three ends.
Stainless steel 316L for strength and greater ease in welding than 304-grade steel.
Maximum operating pressure rating of 250 psi at 70 degrees F ambient temperature.
Meets 3-A Sanitary Standards Number 63-03 for sanitary fitting (authorization number 621).

Check Stock