Categories

Best Welding Gauges

1 Set Taper Gage High Precision Stainless Steel Wedge Feeler Hole Taper Gauge Ruler Measuring Tool

  • CONVENIENT TO MEASURE: Taper welding gauge is made of stainless steel, small size and light weight which is easy to carry. Simply structure, convenient to measure. You can place the gauge on a hole and read the measured value..
  • PRECISE RULER SCALE: Accurate figures and increments are etched into surface, easy to read.
  • DIFFERENT GAUGES: There are several different gauges in one set that can meet your different need..
  • APPLICATION: Taper gage set suitable for the measurement of inner diameter, aperture measurement, groove diameter and so on..
  • MEASURING RANGE: 1~7mm, 8~14mm, 15~21mm, 22~29mm.
Check Stock

Keadic 10 Inch Scratch Wire Brush Slag Removal Tools, including 10 Inch Welding Chipping Hammer with Coil Spring Handle, Wire Brush & Welding Gloves/Fireplaces Golves

  • ✅【GREAT CRAFTMANSHIP & QUALITY MATERIAL】Scratch wire brush slag remover is made of high quality steel wire, compact bristles. Welding chipping hammer Carbon steel, heat treatment, high hardness and toughness and is with spring loaded with black. The welding pliers is with ergonomic grip, easy to operate. These two gauges work well for checking metal sheet wire size before welding or working. Easy to use and carry..
  • ✅【ALL IN ONE PACK】You are going to receive 1 piece of welding hammer, 1 piece of welding pliers, and 1 piece of wire brush 1 piece metal sheet thickness gauge, 1 piece round dual sided wire gauge and this pack comes with protective gloves, please wear this before operation! These tools will surely help a lot for your welding job. Easy to remove and clean corrosion and slag and rust, saving time and energy during your work, very easy to use, long-lasting and quick cleaning..
  • ✅【SCRATCH WIRE BRUSH】You need a good wire brush！This wire brush is simple operation, durable brush. It is used for polished and polishing and removing slag and welding residue. Concave-convex design, high brush density, less loss of the wire. Made of stainless steel bristles, strong and thick wire, not easy to fall off, featuring super toughness, not e....
Check Stock

Biltek Dual Gauge Oxygen & Acetylene Solid Brass Regulator for Welding Victor Gas Torch Cutting - CGA540 and CGA200 Rear Mount Fitting

  • These Oxygen and Acetylene Regulators easily replaces the worn out regulators in your welding kit. An ideal item to have on hand for any welder..
  • Replacement Oxygen and Acetylene Regulators for Victor Style Welding Kits.
  • Single Stage Regulator with 2" Diameter Gauges.
  • Oxygen Outlet Pressure: 0-100 PSI | Acetylene Outlet Pressure: 0-30 PSI.
  • Compatibility: Fits Most Victor Style Torch Sets.
Check Stock

JHTII 2 Piece Stainless Standard Gauge Thickness Tool, Round Dual Sided Wire Gauge & Sheet Thickness Welding Gauge

  • Round Dual Sided Wire Gauge: 0-36 US standard, the dual sided clear digital scaledesign makes it easy to read marks from all directions..
  • High Quality Material: Made of stainless steel.Through multiple processes, not easy to deform and abrasion resistant, to ensure maximum strength and durability, it will not rust in dry environment, compact and light in weight, easy to carry and easy to store..
  • Sheet Thickness Welding Gauge Function: This Metal Gauge is the most useful and helpful for checking metal sheet wire size before welding or working. You can get a precise and accurate data ahead of welding, avoiding unnecessary mistakes..
  • Size: Wire/Metal Sheet Thickness Welding Gauge:24GA (.0239), 22GA (.0299), 20GA (.0359), 18GA (.0478), 16GA (.0598), 14GA (.0747), 1/8" (.0125), 10GA(.1345), 3/16" (.1875), 1/4" (.250), 5/16" (.3125), (.024"), (.030"), (.035").
  • Dual-Sided Round Wire Gauge: 0-36 gauge (0.19-8.23mm).
  • Useful Handy Tools: Using these gauges to determine the thickness of material before working in order to save time and material. The quality is great, and the numbers are very easy to read, even if the tool is dirty, you can still read without problems, it’s a profesional tool, heavy and feels great on the hand..
Check Stock

IMAGE® Welding Gas Welder Oxygen Regulator Gauges Oxy for Victor Torch Cutting Kits CGA 540

  • This handy oxygen regulator easily replaces the worn out regulator in your welding kit! An ideal item to have on hand for any welder..
  • High Quality Oxygen Regulator includes 2" diameter gauges and one valve to displays accurate pressure..
  • Inlet(CGA-540) pressure range: 0-4000 psi.
  • Regulator body is constructed of forged brass.durable and reliable to use.An T adjustment handle makes it easy to adjust pressure by hand..
  • Wide Use:Designed for heavy-duty applications where high outlet pressure is required.Such as Cutting and welding..
Check Stock

SPEEDWOX 6PCS MIG Welding Pliers Welding Hammer 2 Stainless Steel Metal Sheet Thickness Gauges 6 Row Wire Scratch Brush Storage Pouch Welding Tools Set

  • 【What You Get】 8" MIG Welding plier x1, metal sheet thickness gauge x1, round dual sided wire gage x1, welding hammer x1, stainless steel wire brush x1, storage pouch x1. Total 6pcs are what you need for Mig welding operations..
  • 【Premium Quality Pliers】 The body is made of drop forged high carbon steel and heat treated for strength and durability. PVC handles for anti-slip and comfort grip. The spring action reduces hand and wrist fatigue for easy tiling project..
  • 【Practical Chipping Hammer】 Made of 45 steel providing superior quality and performance. The coiled spring handle that helps absorb shock while chipping. Work well for cleaning and removing slag from all your welds. (Net weight 0.5kg.).
  • 【Practical Handy Gauges】 Made of stainless steel that benefits of never rusting. Work well for checking metal sheet wire size before welding or working, save your time and material. Compact size, easy to use and carry..
  • 【Easy Organization】 The storage pouch is made of 600D polyester material for tear resistance and durability. Keep your tools organized and secure..
Check Stock

2 Pcs Stainless Steel Thickness Gauges, Wire Gauge Measurement Tool-Round Wire Cable Sheet Thickness Gage and Wire Thickness Gauge

  • ✅【Premium Material】Our wire gauge measurement tool are made of high quality stainless steel, it has anti-rust and anti-corrosion properties. long term to use..
  • ✅【Package Include】 Package Include 1 piece of round dual sided wire gage and 1 piece of metal sheet thickness gauge.with very clear numbers and letters.avoid unnecessary errors..
  • ✅【Size Detail】Dual-Sided Round Wire Gauge: 0-36 American standard.
  • Wire Sheet Thickness Welding Gauge: 24GA (.0239), 22GA (.0299), 20GA (.0359), 18GA (.0478), 16GA (.0598), 14GA (.0747), 1/8" (.0125), 10GA(.1345), 3/16" (.1875), 1/4" (.250), 5/16" (.3125), (.024"), (.030"), (.035")..
  • ✅【Practical Tool】They are profesional tool, use the gauges tool to determine the thickness of the material before working. saving time and material, help you accurately correct..
  • ✅【Wide Application】Dual-sided round wire gauge can gauge plate iron and steel, leather, paper, wood. wire metal sheet thickness welding gauge can check metal sheet wire size before welding or working..
Check Stock

Mardatt 8\ 6 Function MIG Welding Pliers, Dual-Sided Gage Standard Metal Gauge Measurement and Tungsten Carbide Scriber for Metal Sheet (3 Pack)

  • What you Get: The welding tool set contains 8” mig welding pliers, metal welding gauge and tungsten carbide tip scriber. 3 pack of weld tool a set will help you work effortlessly. Ideal for Splatter Removal, Cleaning and Removing Rust, Hammering, Tip Removal/Install, Wire Cutting, Nozzle Removal/Install, Wire Draw Out, and More..
  • Multi-Purpose Welding Pliers: The precise tooth pattern provide it strong clamping force, the jaws are very sharper and firmer, which improve efficiency. Multiple jaws for SIX Function: wire cutting, tip removal & installation, nozzle removal & installation, inside & outside nozzle cleaning, grooved tips for drawing wire..
  • Practical Welding Gauges: Made of stainless steel with rust and corrosion resistance for long service time. It has more clear scales and easy to read the data.with laser engraving procession, the scale is clear. And they will not wear out. Dual-Sided Round Wire Gauge, 0-36 American Standard (AWG) and SAE.
  • Ideal for measuring sheet, plate iron and steel, leather, wire, Bolt, screw, ect..
  • Handy Tungsten Cardie Tip Scriber：The glass scriber features a durable tungsten carbide tip and an aluminum body, which is twice as hard as steel, so it can easily handle hardened steel, stainless steel, ceramic, glass an....
Check Stock

ZeeDix 2 Pcs Stainless Steel Metal Sheets Welding Thickness Gauge- Wire Gauge Measurement Tool Standard Dual-Sided Round Wire Cable Sheet Gage and Wire Welding Material Thickness Gauge

  • Packing:1 round double-sided metal wire gauge + 1 metal plate thickness gauge.This product can help you check the wire diameter of sheet metal before welding or working.You can get accurate data before welding to avoid unnecessary errors..
  • Clear digital scale: double-sided compass: 0-36 US standard. The two-sided design makes it easy to read marks from all directions. You can see the numbers clearly without squinting..
  • High-quality material: Made of stainless steel, it has anti-rust and anti-corrosion properties. It is durable, it will not rust in dry environment, and it is easy to store. You can use it for a long time without changing it frequently,compact and light in weight, easy to carry..
  • Useful handy tools: Use these gauges to determine the thickness of the material before working to save time and material, they can help you quickly and accurately correct and resolve any wrong thickness, simply like to use this tool, the quality is great, and the numbers are very easy to read, even if the tool is dirty, you can still read without problems, it’s a profesional tool, heavy and feels great on the hand..
  • Widely used: Measuring uncoated steel, steel and steel, leather, paper, wood, bolts, etc..
  • wire / metal sheet thickness welding gauge,check the wire ....
Check Stock

Yaetek Welding gas welder acetylene Regulator for torch cutting kits CGA 510

  • You can use this acetylene regulator to replace the worn out regulator in your welding kit!.
  • A great acetylene regulator for welders, it displays accurate pressure with 2-5/8 in. diameter gauges..
Check Stock

CWI Gifts LT20-2 20 Light Set Green Cord Clear Bulb, 7.5 Feet, 8 Ft

  • Most ruler are INCH size, some angle measurement are Metric size..
  • Different welding gauges comes in one suit case.
  • Shipped by express. Delivery only takes 5-7 days..
Check Stock

Walker Exhaust 47963 Exhaust Pipe

  • INHIBITS CORROSION -- Durable aluminized-steel construction to inhibit corrosion and promote performance.
  • FLEXIBLE SOLUTION -- Offered in a variety of lengths, finishes, diameters and gauges with the appropriate Outlet Diameter (O.D.) connection.
  • see product specifications for more information.
  • BETTER TOGETHER -- Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade.
  • PREMIUM MATERIALS -- Manufactured with high-quality materials using an innovative distortion-free tube cutting process.
  • COMPATIBILITY -- Ideal for weld or clamp installations.
Check Stock

Walker Exhaust 47993 Exhaust Pipe

  • RESISTS CORROSION -- Durable low-carbon steel construction for corrosion resistance and performance.
  • FLEXIBLE SOLUTION -- Offered in a variety of lengths, finishes, diameters and gauges with the appropriate Outlet Diameter (O.D.) connection.
  • see product specifications for more information.
  • BETTER TOGETHER -- Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade.
  • PREMIUM MATERIALS -- Manufactured with high-quality materials using an innovative distortion-free tube cutting process.
  • COMPATIBILITY -- Ideal for weld or clamp installations.
Check Stock