Categories

Best Welding Generator Set

50 Amp Generator Cord and Power Inlet Box, 15FT Generator Cords 50 Amp,125V/250V Generator Power Cord NEMA14-50P/SS2-50R Twist Lock Connector

  • 【Generator Cord 50 Amp】Plug (Male): NEMA 14-50P, 50-Amps, 125/250-Volts,Cord type: STW 6/3 + 8/1 AWG,Maximum Wattage: 12,500 Watts,Length:15 Feet, Finger grip male plug makes it easier for you to plug and unplug.
  • Receptacle (Female): NEMA SS2-50R, 50-Amps, 125/250-Volts, Twist Locking Style.
  • 【Generator Power Inlet Box 50 Amp】 50A Generator Cord Inlet Box, 125/250V, 12500W, designed for all 50 amp NEMA SS2-50 generator cord, 4-8 AWG Wire Supported in Max. It’s one great partner for generator to be installed outdoors in an open area, providing and maintaining continuing backup power supply, especially when short of power, terrible weather.
  • 【ETL Listed】Our Generator Cord and Power Inlet Box has passed the certification of ETL.Our PB50 power inlet box and Generator cords 50 amp is also one good choice for the generator 50Amp 12500W.It is high quality with the features of wind-proof, rain-proof. You can accommodate our generator cord to use with inlet box to match your generator.
  • 【Widely Application】Perfectly suitable for camping, tailgating, outdoor and sporting in spite of hurricane season and other bad weathe....
Check Stock

50 Amp Generator Cord and Power Inlet Box, 15FT Generator Cords 50 Amp,125V/250V Generator Power Cord NEMA14-50P/SS2-50R Twist Lock Connector

  • 【Generator Cord 50 Amp】Plug (Male): NEMA 14-50P, 50-Amps, 125/250-Volts,Cord type: STW 6/3 + 8/1 AWG,Maximum Wattage: 12,500 Watts,Length:15 Feet, Finger grip male plug makes it easier for you to plug and unplug.
  • Receptacle (Female): NEMA SS2-50R, 50-Amps, 125/250-Volts, Twist Locking Style.
  • 【Generator Power Inlet Box 50 Amp】 50A Generator Cord Inlet Box, 125/250V, 12500W, designed for all 50 amp NEMA SS2-50 generator cord, 4-8 AWG Wire Supported in Max. It’s one great partner for generator to be installed outdoors in an open area, providing and maintaining continuing backup power supply, especially when short of power, terrible weather.
  • 【ETL Listed】Our Generator Cord and Power Inlet Box has passed the certification of ETL.Our PB50 power inlet box and Generator cords 50 amp is also one good choice for the generator 50Amp 12500W.It is high quality with the features of wind-proof, rain-proof. You can accommodate our generator cord to use with inlet box to match your generator.
  • 【Widely Application】Perfectly suitable for camping, tailgating, outdoor and sporting in spite of hurricane season and other bad weathe....
Check Stock

Portable 2000 Watt Engine Driven Welder 130 Amp Stick Welder

  • ①【Welder/Generator Combo】 2000 watt Power Generator with 130Amp powerful stick welder..
  • ②【Low-running Cost】 Engine driven welder does not require a power source, which can reduce the basic cost and construction cost of a commercial power source..
  • ③【130A MMA Welding】 It can weld all kinds of iron and ferrous metals such as carbon steel and medium carbon steel, working outdoors for up to 6 hours..
  • ④【Wide Application】 Ideal for farms, construction sites, machine building, home DIY, etc. Featuring 2000 watts of DC output, this welder generator will provide you with the power wherever you need..
  • ⑤【Easy operation and maintenance】 Maintenance is as easy as operation. The one-touch switch and one-side maintenance method engine make it easy to perform maintenance without complicated work..
Check Stock

CANAWELD TIG AC DC 201 Pulse D High Frequency Digital 200 Amp Welder Ability to select 120 and 240 Volt Metal Thickness 0.002 Inch To 1/4 Inch Made in Canada 3 Years Warranty Without Foot Pedal

  • AC/DC including all pulse parameters of TIG welding machine. Tested in (104°F/40°C), designed for the toughest conditions. Excellent welding quality....
  • Ability to weld very thin materials especially aluminum. Digital control of all welding parameters: Pre-Flow, Starting Current, Slope-Up, Welding....
  • Generator compatible design. Excellent welding characteristics in Stick mode with any type of rods. Digital ammeter and Hold Function of the last read....
  • Automatic fan ensuring protection against overheating saving energy and less dust/debris entering the machine. Adjustable Arc Force in Stick mode..
  • Metal face panel. Comprehensive 3 Year Warranty..
Check Stock

CANAWELD Arc Welding Stick Welder MMA 201 MADE IN CANADA 200 Amp TIG Welder (LIFT) Weld up to electrode #4 IGBT Inverter Lightweight 220V(150 A @%100 Duty Cycle) Generator compatibale (MMA 201)

  • ✅High power output, 150A @ 100% Duty Cycle & 200A @ 30% Duty Cycle. Tested in (104°F /40°C), designed for the toughest conditions. Carrying belt for easy transportation..
  • ✅Two available welding process: Stick and TIG (Lift). Ability to use up to 165 feet (50 meters) leads without any power loss at the weld. Excellent welding characteristics with any type of rods..
  • ✅Automatic hot start which improves the arc striking with the most difficult rods. Arc Force Function to automatically select the best welding arc dynamics..
  • ✅Electrode anti-Sticking function. Ability to work outdoors with adequate power generator. Fan cooled and thermally protected against overheating..
  • ✅Large size Dinse style welding connectors. Metal face panel. Comprehensive 3 Year Warranty..
Check Stock

RVINGPRO NEMA L14-30R Flush Mounting Locking Receptacle for Generator Twist Lock Outlet 30 Amp 125/250V 3 Pole 4 Wire Grounding, Industrial Grade, UL Listed

  • 【FUNCTION】 The NEMA L14-30R Flush Mounting Locking Receptacle is designed for generator, transfer switches, welding device or RV camper marine power, etc.
  • 【Premium Material】The L14-30R Locking Receptacle is made of heavy duty nylon housing and quality brass contacts, which is very sturdy and durable.
  • 【UL Listed】 The 30 Amp 125V/125V industrial grade twist lock outlet has past the UL Certification, making it safe enough during using, just use it with ease.
  • 【Easy Installation】 The 3 different colors’ wiring screws combine with back and side wiring design allow for easier and quick installation.
  • besides, the serrated terminal plates design ensures firm wiring connection.
  • 【Twist Lock Design】 The secure locking design ensures the receptacle be tightly locked on generator, ensuring it won’t loose or fall off from generator vibration during using.
Check Stock

KICKINGHORSE A220 CSA/US Certified ARC Welder 240V. High Power High Rating 220A 40K Hz IGBT Welding Inverter Optimized for Generator / Extension Cord. Ideal for Jobs Where High Reliability Required

  • 【STRONGEST IN THE CLASS】220 amp rated output @ 25% duty cycle at 170F (40°C) ambient temperature. Burn 3/8 inch plate in single pass, run 3/16 rod with no stress. Handles E6013, E7014, E7018 or E6011 electrode, suitable for mild steel, cast iron, stainless steel as well as hard surfacing..
  • 【GENERATOR FRIENDLY】Maintain the same stable performance at 160V to 270V input voltage, A220 is optimized for dirty power and fluctuating voltage, build to run off generator or weld on-site. Excellent all position welding with Long extension cable..
  • 【PUT SAFETY FIRST】CSA/US approved - 100% safe and legal use both at workplace and home. The authenticity of the rated output amperage and duty cycle of all KickingHorse welding inverters are certified by CSA/US. No worry for fake specs anymore..
  • 【SMOOTH ARC IGNITION】Unbeatable 76-volt open circuit voltage (OCV), outperform all the transformer welders in the market, provides excellent arc strike performance at rust surface..
  • 【WORRY-FREE WARRANTY(need activate)】This product is covered by KickingHorse 1(one) year manufacturer guarantee(need active)S. We provide local customer service in US. You are welcomed to contact us anytime if you have any questions or concerns..
Check Stock

DuroMax DS4000WGE 3500 Running Watts/4000 Starting Watts Gas Powered Portable Generator, with 210 Amp Welder Combo, RED

  • Plenty of Power – Powerful ARC Welder Doubles as a 4000 watt Power Generator.
  • Powerful Engine – The DuroStar 420cc OHV engine is a workhorse that provides plenty of power to handle multiple jobs from powering high voltage appliances to heavy duty power tools.
  • Low Oil Shutoff – Protects your investment by automatically shutting the generator off when it senses that the oil is low.
  • Fully Featured Power Panel – With 50 Amp to 210 Amp DC welding currant adjustment, three 120-Volt AC power outlets and 12-Volt DC battery charger.
  • Complies with Emissions Standards – All DuroStar generators are both approved by the EPA (Environmental Protection Agency) and CARB (California Air Resources Board) and follow strict guidelines to ensure our generators are as environmentally friendly as possible.
Check Stock

Lincoln Electric, K2857-1, Engine Driven Welder, Ranger 225

  • MIG, flux-core and TIG welding capable (with optional equipment).
  • Powerful 23 HP Kohler 2-cylinder, 4-cycle engine with overhead valve air-cooled design.
  • Totally enclosed case with 3 service access doors keeps the engine fully protected.
Check Stock

Amico ARC-140 140 Amp Stick ARC DC Inverter Welder IGBT Digital Display LCD 110-Volt Welding Soldering Machine ARC-140

  • Very easy to starting and improvers, simple to operate, Performance is remarkable, LED amperage display, Very solid structure and professional....
  • Advanced IGBT inverter technology, excellent Arc stability, hot start, anti-sticking, Use on all of generator, also is very perfect..
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection..
  • 60% duty cycle at 140 amps, ensures long time welding, the current range from 20-140 Amp, Very suitable for welding of various materials and projects..
  • This is optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent. The strength of its components makes this a....
Check Stock

Amico ARC-185, 180 Amp Stick Arc Inverter DC Welder, 115V/230V Dual Voltage Welding Soldering Machine

  • Advanced IGBT inverter technology, excellent Arc stability, hot start, anti-sticking, force adjusts. Steeples amperage control. Use on all of generator, also is very perfect..
  • Very easy to starting and improvers, simple to operate, Performance is remarkable, LED amperage display, Very solid structure and professional configuration..
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection..
  • 60% duty cycle at 180 amps, ensures long time welding, the current range from 20-180 Amp, Very suitable for welding of various materials and projects..
  • This is optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent. The strength of its components makes this a reliable work tool for professionals or personal use..
Check Stock

Cumberland Swan/Vi-Jon 1000032061 Witch Hazel (Pack of 12)

  • USED FOR-- High quality generator controller is integrated with digital, intelligent, and network technology for the automation and monitoring system of a single generator set.
  • MULTIFUNCTION-- Realize the automatic start/stop, data measurement, alarm protection and "three remote" functions of the generator set. Speed sensor frequency range: 1Hz-10KHz, speed sensor voltage range: 0.5V-70V.
  • WITH LARGE-SCREEN-- The controller adopts large-screen liquid crystal (LCD) display, Chinese, English, Spanish and Russian optional interface operation, simple operation and reliable operation.
  • WIDE APPLICATION-- Generator controller is suitable for 3?phase 4?wire, 3?phase 3?wire, single?phase 2?wire, 2?phase 3?wire (120V/240V) power supply 50Hz/60Hz system.
  • GOOD REPLACEMENT-- This generator controller module is a good replacement for your old or broken one, comes with 4pcs brackets, easy to install.
Check Stock

CANAWELD Arc Welding Portable Inverter Stick welder 162 D Made in Canada 160 Amp Stick Welder TIG Welder Ability to Select between 120 V & 240 V IGBT Inverter Generator compatible

  • Excellent arc characteristics with all types of rods up to 5/32”. Low power consumption..
  • Ability to work outdoors with adequate power generator. Fan cooled and thermally protected against overloading..
  • Light weight, Carrying belt for easy transportation. Ability to use up to 165 feet (50 meters) leads without any power loss at the weld..
  • Two available welding processes Stick and TIG (Lift). Tested in (104°F /40°C), designed for the toughest conditions..
  • Large size Dinse style welding connectors. Metal faced panel. Comprehensive 3 Year Warranty..
Check Stock