Categories

Best Welding Leveling Clamps

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

OBPSFY 5 PCS Magnetic Welding Clamps Set,Adjustable V-Pads Fixture Clamp Hand Tools,Magnets On Both Pad Face and Bottom

  • 【Welding Clamp】* Hold tabs,pipe, gussets, plates and odd shaped pieces in position for tack welding.Light duty & tight spot holding! Build, Hold, and Position Steel.Magnetic tack welding Tool，make welding easier..
  • 【Strong Hand Tools】* Adjustable welding magnet, Magnetic welding holder, hold and position round, flat, and square parts in light duty substructure applications! Time saving magnetic tools for welding..
  • 【Material】* The magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.Magnets on both pad face and the bottom,Can hold the workpiece well for welding work..
  • 【Note】* Avoid Pronlonged exposure to high heat. The Magnets may demagnetize with temp. exceeding 185°F.（Heat Warning）.
  • 【Package】* 5 Pack Magnetic Welding Clamps（2" ，Pull Force 12 lbs.）.
Check Stock

FOITECHY 4 Pcs Magnetic Welding Clamps,Adjustable V Type Welding Clamps,Adjustable V-Type Fixture,Magnetic V Pads Kit, Magnetic V-sharp Tab Holder Corner for Tack Welding

  • 1.djustable V-Type Fixture Clamp: Magnetic welding clamps provide secure gripping power for rapid,hold and position round, flat, and square parts in light duty substructure applications.
  • 2.4 Pack strong hand magnet(XDV4: 2"),Pull Force 12 lbs. Our V-type magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.
  • 3.The V-type magnetic welding clamps are suitable for holding tabs, gussets, plates and odd shaped pieces in position for tack welding. They are widely used in doors, tool boxes, windows, wooden boxes, furniture, and other equipment..
  • 4.Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F.
Check Stock

Spurtar 6pcs Welding Magnet Welding Magnets and Clamps 75lbsX2+50lbsX2+25lbsX2 Magnetic Welding Holder 3 4 5 Arc Welding Electrode Holders 45 90 135 Degree Mig Welder Welding Accessories and Tools

  • STRONG POWER: 6 pieces different sizes welding magnet supports any ferrous metal object up to 25 lbs, 50 lbs, 75 lbs, satisfying all kinds of needs.
  • SAFE & SECURE: These welding magnets and clamps grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates.
  • THREE ANGLES: Heavy-duty arrow design steel welding magnet square supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
  • MULTIPURPOSE: The magnetic welding holder clamps connects parts, freeing up your hands for efficient work and improve work safety, and it can also be used as a floater to separate steel plates.
  • EFFICIENCY: Spurtar Welding Magnet Set Magnetic Tool Holder s ideal welding tools and accessries for being used as holder and positioner in welding, soldering, marking off, pipe installation, making your welding job more efficiently and precisely..
Check Stock

TRRAPLE Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, 2/4 Pcs Durable Stainless Steel Tab Holder Corner Butt Welding Panel Clamps Tools

  • HIGH QUALITY WELDING CLAMPS -- Our v-type magnetic welding clamps are made of made of high quality stainless steel, sturdy and durable, can be used for a long time..
  • MAGNETIC HOLDERS -- One rare earth magnets in each pad provide secure gripping power for rapid, and convenient, holding and positioning..
  • EASY TO USE -- Pads pivot to hold onto round, square, or flat metal surfaces, easy to install and apply..
  • PERFECT SPOT WELDING CLAMP -- Hold tabs, gussets, plates and odd shaped pieces in position for tack welding..
  • WIDELY APPLIED -- Widely used on doors, tool boxes, windows, wooden case, furniture and so on..
Check Stock

YESWELDER Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, Suspender Fixture Adjustable Pads Kit(4 Pcs)

  • HIGH QUALITY ▶V-type magnetic welding clamps, sturdy and durable, can be used for a long time.
  • EASY TO USE▶Hold and position round, flat, and square Parts in light duty substructure applications!Easy to install and apply.
  • MAGNETIC HOLDERS▶ Magnets on the pad face only.
  • INCLUDE▶ Each item contains 4 pcs of Magnetic Welding Clamps.
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

Tysun 4 Pcs 6 Inch C Clamp Set, Up to 6 Inch Jaw Opening, 2-5/8 Inch Throat Depth Heavy Duty C-Clamps for Woodworking Welding and Building

  • ★【Heavy Duty C Clamp Set】6 Inch c clamp made of high quality cast malleable iron, rust resistance and corrosion resistance, sturdy and durable.
  • black coated surface construction protects your clamps from moisture, preventing corrosion from damaging clamps..
  • ★【6 Inch C Clamp Size】Maximum jaw opening: 6 inches.
  • ★【Maximum Pressure】Sliding T-handle to produced maximum torque with little effort thereby reducing hand fatigue. Chrome-plated screw thread turns easily and does not bind so your clamps will last as long as you need them..
  • ★【Top Locking Force】Aside from being compact and made of high-quality steel for holding metal pieces together for welding, c clamps also allows for secure gripping to glue wood pieces together..
  • ★【Wide Application】Versatile c clamp secures parts for assembly, fastening, gluing, and welding in woodworking, metalworking, and automotive applications..
Check Stock

Magswitch MagSquare 600 Magnetic Welding Square Base Clamp Holder for Welding Kit, Tools, Supplies and Accessories, Magnet Switch with On/Off Capabilities, 600 lb Holding Force

  • ...netic squares are the most versatile workholding and fixturing tool ever! Align and secure flat or round tubing pieces of steel to fabricate multi-angle holds.
  • WELDERS HELPER: Our welding & heavy fabrication tools are engineered to drive productivity for professional welders, fabricators and pipefitters. Large sheet leveling, sheet de-stacking, fixturing, weld grounding, mounting, metalworking, notching, workholding, positioning, alignment, spatter, fitting and many more applications are performed significantly faster.
  • ON/OFF SWITCH: The true ON and OFF capabilities create a platform that is more efficient, faster, safer and easier to use! Use it with tig, spot, stick torch, fiber, arc welders. Magnetic grip turns all the way off for quick release. No need to pry or fight magnet for precise positioning.
  • ENDLESS BENEFITS: Multiplane magnetic grip on 5 sides, pre-tapped holes for mounting. No electrical power source needed. Pull corners, secure steel sheets for cutting, use as a guide or make your own fixtures. A must for any welding table or cart.
  • EASY TO CLEAN: Powerful Magnet stays clean unlike traditional magnetic squares that hold on to metal chips even when off, with our heavy duty magnet you won’t cut your fingers cleaning away steel shavings....
Check Stock

4 Pcs Locking C Clamp Set Locking Pliers with Fixed and Swivel Pads 6 Inch 9 Inch 11 Inch Metal Tools Welding Clamps for Home Farm

  • Locking C Clamp Set: 4 welding clamps are included, including 1 piece of 6 inch locking C clamp with fixed pad, 1 piece of 6 inch locking C clamp with swivel pad, 1 piece of 9 inch locking C clamp swivel pad and 1 piece of 11 inch locking C clamp with swivel pad, meeting your everyday needs.
  • Sturdy to Use: the jaw is forged with carbon steel as a whole, featuring with good toughness.
  • The handle of stamped steel plate, clamping object without deforming.
  • The heat treatment adjusting rod is easy to adjust the suitable size.
  • Additionally, the serrated jaw of locking C clamp has a strong clamping force.
  • Adjustable Design: the locking C clamp is easy to adjust to the appropriate clamping size because of the fine tuning knob design.
  • The quick release handle is convenient and labor saving.
  • Moreover, the spring provides good tensile force.
  • Firm Locking: welding clamps are mainly applied for clamping parts for riveting, welding, grinding and other processing.
  • Since the jaw can generate large clamping force, the clamped objects will not loosen.
  • Essential Supplies: in daily life, the lock C clamp is suitable for electricians and welders to clamp welding boards.
  • And woodworkers can use this metal tool to quickly clamp boards or frames.
Check Stock

4 Inch Heavy Duty Malleable C Clamps for Woodworking Welding Automotive Carpentry Building 4 Pack

  • 4 Inch C Clamp: Use this set of 4 c clamps for woodworking, metal work, welding, automotive, or furniture manufacturing.
  • Multi-Use: The welding face clamp has a sliding handle that will help reduce hand fatigue while ensuring a strong, secure hold on any wood and metals.
  • Clamping Range: Our c clamp set features a screw and thread design that allows you to freely control the clamping range to your needs.
  • Dimensions: Each 4 inch c clamp measures 8 x 4 x 0.6 inches in length.
  • Reliable Quality: The black c clamps for metal working are made from malleable iron that won’t easily break after long-term use.
Check Stock

Tourna 850-ES Precision Stringing Machine Black

  • Diablo tensioner and linear pull for the most delicate strings. Glide to Activate string gripper allows tensioning with one hand. Super fast..
  • Patented Down-Press Clamps and Gravity release make this the quickest most agile machine on the market..
  • Loaded with features like the Auto-Electric Brake, 4 levels of pre-stretch, 6 pull speeds, 8 memory settings, Electric height adjustment, 6-point and Self Leveling quick mounting..
  • Universal, space saving, ultra efficient, CNC Crafted precision clamps for less pressure on the strings. Unique dial prevents clamp loosening or tightening during the stringing process..
  • Convenience features like rear tilted mounting posts to maximize workspace, Tool Tray, Tool Holder, Cell Phone Holder. Universal V supports and unvirsal clamps make this ideal for both Tennis and Badminton..
Check Stock

WeldingCity 1-Lb ER309L Stainless Steel 309 TIG Welding Rod 1/8\x36\ | Pack of 1-Lb

  • TIG Welding Gun Holder: This steel welding torch holder weighs 1.7lb with simple overall shape. It has silver granular matte texture.The base is electroplated and polished to reduce the surface roughness and look bright and smooth.
  • Strong Magnetic Base: The powerful ferrite magnet that has heavy-duty holding stamina and the base are connected by a SC 4.8 screw and nut, which has good performance strength grade.
  • Convenient Welding Helper: Torch holder will keep your TIG torch secured, the versatile design provides multiple option for torch placement in the holder.
  • Free of Working Table: Powerful magnet clamps to workbench or the side of the welder, supporting the welding torch firmly, so it won't get bumped off the welding table. The wire/cable can also be nicely arranged.
  • Fit Most TIG Gun: Our welding torch stand is suitable for most TIG torches.
Check Stock