Categories

Best Welding Oxy acetylene Torch Kits

RX WELD Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Tool Set with Two Hose,Goggles,Regulator Gauges,Storage Case-Portable Cutting Torch Set Welder Tools Black

  • 【OXY ACETYLENE TORCH KIT】Our Oxygen Acetylene Torch Kit for Welding and Cutting is a 15 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
  • Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • 【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • 【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
Check Stock

ABN Oxygen & Acetylene Torch Kit – 10 Pc Welding Kit Metal Cutting Torch Kit, Portable Cutting Torch Set Welder Tools

  • OXY ACETYLENE TORCH KIT: The ABN Oxygen Acetylene Torch Kit for Welding and Cutting is a 10 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
  • Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • EASY TO USE: To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
  • CREATING A NEUTRAL FLAME: A neutral flame creates carbon dioxide that purges air from the heated metal for easier cutting and welding.
  • To create a neutral flame, you must find the correct relationship of oxygen to acetylene.
  • After adjusting the pressure and connecting the oxygen and acetylene tank systems to the brazing torch kit, open the acetylene gauge and light the torch.
  • Begin opening the oxygen valve and continue adding oxygen until sharp cones are created at the tip of the portable torch.
Check Stock

Oxygen Acetylene Torch Kit Oxy Gas Welding Cutting Brazing Set Portable Welder Tool Nozzles Regulator Hose Gauges Blue Case

  • [HIGH-QUALITY MATERIALS] The oxy acetylene torch kit is made of premium stainless steel and brass, which is strong and durable and can extend the life of the appliance. The workmanship is fine, does not scratch the palm, and is easy to grasp, improving the customer's experience of using it..
  • [15PCS TORCH KIT] The cutting torch kit features four nozzles (1 cutting tip & 3 welding tips), installed the tips you need, and the regulator easily adjusts the gas flow to make your equipment perform at its best.
  • The torch set includes a blue heavy-duty plastic blow molded carrying case for easy transport and storage..
  • [SIMPLE OPERATION] The oxygen acetylene regulator in the acetylene torch kit can help you adjust the PSI to the necessary position.
  • once you have ignited and adjusted to a neutral flame, move the torch tip slowly along the cut line until the metal is completely separated..
  • [USAGE SCENARIO] The torch set is ideal for a wide variety of applications such as construction sites, fabrication repair, automotive, general maintenance work, metal engraving, metal cutting, and more, ideal for the amateur metal worker or s....
Check Stock

WeldingCity Medium Duty 1-piece Type Victor Style Acetylene Welding Brazing Nozzle 0-W-1 (Size 0) with W-1 Mixer for 100 Series Torch Handles

  • Premium Victor style acetylene gas welding/preheating/brazing nozzle W-1 series one-piece type for 100 series torch handles (not for J-100 series)..
  • Double O-ring sealed spiral mixer (W-1 type) blends oxy-acetylene gas. 65° elbow angle. Brass coupling nut with built-in snap ring..
  • Medium duty welding/preheating/brazing for use with oxygen-acetylene gas. Work with Victor light to medium duty 100 series (not J-100) torch handles such as 100C/100FC/WH26/WH260 and other aftermarkets versions..
  • Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4, 5, 6 and 7. Pack of 1 welding nozzle..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Hobart 770502 Medium Duty Oxy-Acetylene Kit

  • General Maintenance Work - Extremely Popular General Maintenance Work, Automotive Repair, Metal Sculpture, Air Conditioning, Refrigeration etc.
  • Ideal Use - For iron or steel welding, braze-welding, plus brazing, cutting, bending & forming.
  • Waterproof Storage Compartment - Carrier is made of tough, lightweight polypropylene.
  • Regulator Type - Rear entry regulators for better balance on the small cylinders Oxygen Regulator Type: (CGA540) Acetylene regulator Type: (CGA200).
  • More convenient -Oxy Acetylene Torch Kit Suitcase With Double Wheels,No more lugging around heavy suitcases..
Check Stock

SÜA 25 Series Gas Welding & Cutting Kit Oxygen Torch Acetylene Welder Outfit

  • Medium/Heavy Duty Oxy-Fuel Welding & Cutting Outfit Compatible with Harris.
  • 25HX Series Oxygen and Acetylene Regulators. Torch Handle and Cutting Attachment Compatible with Harris. Can also be used with Oxygen-Propane using 6290-NX Series Propane Tips..
  • Included Acetylene Cutting Tip: 6290AC Size#2, (Can also use 6290 Series). Included Welding Tips: 23A90 Series #1, #3 and #5 with E-43 Mixer..
  • Can cut up to 1-1/2” with provided cutting tip and up to 6” with additional larger tips. Can weld up to 1/8” with provided welding tips and up to 1/4” with additional larger tips..
  • Accessories: 15 ft. Carrying bag, Twin Welding Hose, Tip Cleaner, Goggles, Spanner and Lighter.
Check Stock

WeldingCity Heavy Duty Acetylene Heating Nozzle (Rosebud) MFA Series Size 8 (8-MFA) for Victor 300 Series Torch Handles

  • Premium quality brand-new one-piece type acetylene gas heating nozzle MFA series for Victor 300 series torches. Pack of one MFA nozzle..
  • Spiral mixer with double O-ring sealed to blend oxy-acetylene gas. Brass coupling nut with built-in snap ring. Total nozzle length: 12" (size 4 - size 8) and 17.5" (size 10). 65° elbow tip angle..
  • General purpose heavy duty multi-flame heating head for heat treating, straightening and priming with oxy-acetylene gas. Available nominal tip orifices: 4, 6, 8 and 10..
  • Work with Victor heavy duty 300 series torch handles and other aftermarkets gas handle versions..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Injection Type Gas Welding Torch, Oxy-Propane Oxy-Acetylene Welding Tool Cutting Soldering Repair Fix Equipment with Handle Grip Portable Size Cooper(H01-6)

  • 1:This welding torch adopts high quality copper, with good resistance to high temperature and long lifespan..
  • 2:With good welding effect, high welding speed.Compact design, convenient to use..
  • 3:Injection type design, suitable for oxy-propane welding and oxy-acetylene welding..
  • 4:Simple structure, stable performance, easy to maintain..
  • 5:Compact design, convenient to use, easy to carry and transport.
Check Stock

H&J Heavy Duty Acetylene & Oxygen Cutting Welding Torch Tool (300 series), Torch handle + Cutting attachment, with one piece Cutting Nozzle/Tip

  • High quality Heavy Duty Victor Type Oxygen/Acetylene Cutting Welding Torch Tool.
  • Constructed with high strength alloy, heavy duty stainless steel and durable brass.
  • Cutting torch and handle are ready for multiple gas options.
  • Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane.
  • Cuts 1/8-inch to 5-inch and welds up to 1/2-inch steel.
  • Package includes: 1 set of torch handle, 1 set of cutting attachment, 1 piece cutting tip.
Check Stock

TOAUTO Heavy Duty Cutting Torch, Oxygen Propane Acetylene Welding Torch Flame Torch Handle & Cutting Attachment with Propane Tip

  • 【HIGH PERFORMANCE】This cutting torch is mainly used to finish heavy duty work. With this kit to cut metal with thickness 1/8-inch to 5-inch and weld up to 3/8 inch, can easily finish the work ..
  • 【MULTIPLE GAS OPTIONS】 Cutting torch and handle are ready for multiple gas options.
  • Oxy-Acetylene, propane or other fuel. 2 fittings on the handle mix up oxygen and combustible gas through standard hose (inner Dia.6mm) to get cutting flame . The cutting nozzles may be different depends on the gas you are using.
  • 【HIGH QUALITY AND STABILITY】Adopts pure brass valve, stainless steel pressure handle, integrated adjustment handwheel and stainless steel stem to offer longer lifespan and higher precision . Built in non-return valve , more safety to use it ..
  • 【FULL SET】Full kit include torch handle, cutting torch, 1pc propane tip and 1pc acetylene tip （To meet different requirements) . Total assembled length 16inch (40mm), handle length 4.2 inch, which is very convenient to finish welding and cutting work..
  • 【WIDELY APPLICATION】Widely used in workshops, mechanical maintenance, cutting metal and welding ..
Check Stock

Hromee Oxygen Acetylene Hose 1/4-Inch × 50 Feet with 9/16”-18 B fittings Welding Cutting Torch Twin Hose

  • TWIN HOSE: The twin hose is designed for transporting oxygen and acetylene to your all oxy-acetylene welding, brazing, soldering and cutting equipment. The green line is for oxygen and the red line is for acetylene. It is grade R..
  • 1/4” × 50FT: The length of each welding hose is 50 feet. It is long enough for daily life use or industry and agriculture use. The inner diameter of hose is 1/4 inch(6.3mm) which supply optimal flow rate in the maximum pressure of 300 PSI (20Bar)..
  • HIGH QUALITY RUBBER: Hromee oxygen acetylene hose is made of acetylene rubber for maximum flexibility which is easy to store on reels and also helps increase the durability and resistance to kink. Other than these, it also can stay flexible in extreme temperature. All these make it ideal for long term use..
  • COLOR-CODED: Red and green two different colors make you distinguish them easily and allow for safe and accurate connections. Always be keen on the color-coding to ensure you know exactly how to put the connections during use..
  • B FITTINGS: We equipment B fittings in both ends which fits for most welding torch and regulators. Fitting Sizes: 9/16"-18 LH and 9/16"-18 RH..
Check Stock

Hromee Oxygen Acetylene Hose 1/4-Inch × 25 Feet with 9/16”-18 B fittings Welding Cutting Torch Twin Hose

  • TWIN HOSE: The twin hose is designed for transporting oxygen and acetylene to your all oxy-acetylene welding, brazing, soldering and cutting equipment. The green line is for oxygen and the red line is for acetylene. It is grade R..
  • 1/4” × 25FT: The length of each welding hose is 25 feet. It is long enough for daily life use or industry and agriculture use. The inner diameter of hose is 1/4 inch(6.3mm) which supply optimal flow rate in the maximum pressure of 300 PSI (20Bar)..
  • HIGH QUALITY RUBBER: Hromee oxygen acetylene hose is made of acetylene rubber for maximum flexibility which is easy to store on reels and also helps increase the durability and resistance to kink. Other than these, it also can stay flexible in extreme temperature. All these features make it ideal for long-term use..
  • COLOR-CODED: Red and green two different colors make you distinguish them easily and allow for safe and accurate connections. Always be keen on the color-coding to ensure you know exactly how to put the connections during use..
  • B FITTINGS: We equipment B fittings in both ends which fits for most welding torch and regulators. Fitting Sizes: 9/16"-18 LH and 9/16"-18 RH..
Check Stock

HandLtoolsmart Victor Type Heavy Duty (300 series) Oxygen/Acetylene Cutting, Welding Torch Tool

  • High quality heavy duty three piece torch kit.
  • Constructed with high strength alloy, heavy duty stainless steel and durable brass.
  • Cutting torch and handle are ready for multiple gas options.
  • Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane.
  • Cuts 1/8-inch to 5-inch and welds up to 1/2-inch steel.
  • Package includes: 1 set of torch handle, 1 set of cutting attachment, 1 piece cutting tipDescriptionFeatures:.
  • Special tips: CA2460 cutting attachment, 315FC torch handle.
Check Stock