Categories

Best Welding Quick Connector

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

ZHANGM 2Pcs Car Degreaser Accessories, Ground Points, Car Dent Repair Spare Parts, Stud Welding Machine, Grounding Connector, Car Body

  • Simple to use: Pump the plunger just a few strokes, the cup will attache the surface completely and hold suction for more than 6 hours. Release Valve Lever Permits Quick and Complete Release..
  • Car Spotter Accessories Spot Earth Car Dent Repair Spare Parts Stud Welding Machine Ground Connector Auto Bodywork Spotter Tools With netic.
  • No need to hold the connector, easily work..
Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

VELLEDQ Field Assembly Sensor/Actuator Panel Mount Connector M8 3-Pin Female A-Coding Rear Flange Joint

  • 3 Pin Connector Specifications: The working voltage of the 3 Pin waterproof power connector can reach 125VAC, and the rated current is 5A. General wire diameter: Φ3.0mm～Φ6.0mm. Cable specification: 0.34 --0.75mm²/18-20 AWG. Contact resistance 003c5mΩ. Mounting dimensions: 12mm. Waterproof Protection level: IP67. Package list: 1 plug + 1 socket..
  • High-Quality Material: Our 3 pin connector uses a PBT material shell that imports from abroad with stability, compression, anti-explosion, and anti-deformation. Using gold-plated contact with the superior performance of corrosion resistance and electrical conductivity effectively deals with temperature rise..
  • Easy to Install Circular Connector: Cable connection type: Soldering. Cable in-line, threaded coupling, quick connect, solder plug & socket. Note: Prohibited to charged inserted. The wiring welding temperature requirement is 380℃±40℃, operation time: each point does not exceed 3 seconds. Note: Prohibited to charged inserted..
  • Perfect Waterproof Aviation Connector: The waterproof connector can be up to waterproof IP67 protection level when connected, its rigid spring snap fastening self-locking device waterproof ring is well in water-resisting. Even in harsh outdoor weather conditions, it can stil....
Check Stock

YaeTek 12PCS Oxygen & Acetylene Torch Kit Welding & Cutting Gas Welder Tool Set with Welding Goggles

  • Application - Welding and Cutting -- This YaeTek gas welding torch kit is used for cutting, welding, heating, with precision and efficiency..
  • Material -- heavy duty metal and brass, with high strength, durability, longevity. This welder torch Kit tool set is a great choice for both an amateur metalworker or a professional..
  • With a divisional box, convenient and easy to carry..
  • Packages Includes -- 3 copper pines, 1 welding pine connector, 1 cutting, 1 aluminum pin, 1 iron chrome-plated igniter, 2 copper joint, 1 wrench, 1 welding goggles, 1 storage box.
Check Stock

Miller 129527 Conn,Tw Lk Insul Male(Dinse Type)50 Series

  • Premium quality Dinse-style insulated cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" diameter pin (25-mm) and 1/2" diameter pin (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

3 Pin Connector, Waterproof Connectors, Aviation Connector for Industrial, Power, Car, and Other Indoor/Outdoor Electrical Connection (2Pcs, Solder, Metal+Plastic)

  • 3 Pin Connector Specifications: The working voltage of the waterproof power connector can reach 400VAC, and the rated current is 10A. General wire diameter: Φ3.0mm～Φ9.0mm. Cable specification: 1.0 --1.5mm²/18-16 AWG. Contact resistance 003c2.5mΩ. Mounting dimensions: 16mm. Waterproof Protection level: IP67. Package list:2pcs( 2 male plug + 2 female socket).
  • High-Quality Material: Our 3 pin connector uses a PBT material shell that imports from abroad with stability, compression, anti-explosion, and anti-deformation. Use metal material flanges seat, against high-frequency noise and electromagnetic interference. Using gold-plated contact with the superior performance of corrosion resistance and electrical conductivity effectively deals with temperature rise..
  • Easy to Install Circular Connector: Cable connection type: Soldering. Cable in-line, threaded coupling, quick connect, solder plug & socket. Note: Prohibited to charged inserted. The wiring welding temperature requirement is 380℃±40℃, operation time: each point does not exceed 3 seconds..
  • Perfect Waterproof Aviation Connector: The waterproof connector can be up to waterproof IP67 protection level when connected, its rigid spring snap fastening self-locking device waterproof ring is well in ....
Check Stock

3528 2-pin 8mm LED Connector kit led Strip Connector L-Shaped Connector 2-pin Right-Angle Connector T-Shaped Connector Solderless Seamless Connector Jumper Connector (8mm)

  • The LED connector kit is suitable for 2835 3528 2-pin 8mm LED light strips. It is easy to install. Connect the positive and negative poles of the connector. Just insert the light strip into the connector and clamp the cover. No need for welding and other processes.
  • Strip connectors include: 8 XL connectors, 2 XT connectors, 2 X female and DC connectors, 2 X DC power supply 2way distributors, 20X LED seamless connectors, 4 X 3825 2pin LED with pigtails Connector, 6 X 3528 2-pin LED light with jumper connector, 20 X set of screw fixing clips, 20 X self-adhesive light bar mounting clip.
  • Note: When the waterproof LED light strip is connected with these LED light strip connectors, the silicone on the surface of the welding area must be peeled off.
  • 2-pin 8mm LED connector supports 0-4A current and 0-24V voltage input, and the heat resistance rating is -20~100 degrees.
  • 100% satisfaction guarantee: GOOCHAN connector kits are sold with a 30-day money-back guarantee. If you have any questions about this product, please feel free to contact us. We will solve the problem for you as soon as possible after receiving the information.
Check Stock

Good Sealing Compression Ferrule Connector Tee Effective Sealing Tee Equal Diameter 316 for Natural Gas for Complicated Pipeline for Solar Energy(Ф6)

  • DN15 Double ferrule bulkhead connector thread specification is ф1/2 ,external thread size is 20.3mm/0.8in,internal thread size is 19.5mm / 0.8in and the error is 19.5mm/0.8in..
  • Double ferrule bulkhead connector adopts double ferrule type installation,reusable,simple and convenient operation, and can be removed freely.No welding is needed, which is good for fire prevention, crack prevention, high‑altitude operation and can eliminate the disadvantages caused by inadvertent welding..
  • DN15 Double ferrule bulkhead connector has strong connection, high pressure resistance, tightness and repeatable installation, the installation and maintenance are simple and convenient, and the work is safe and reliable..
  • DN15 Double ferrule bulkhead connector selected high‑quality stainless steel 316 materials,the surface of the connector is finely ground by a special process, slick and delicate, the interior is clean and bright, and the tolerance control is accurate..
  • The manufacturing and production of the products follow strict product quality control standards, the product performance is stable, and the quality is reliable. You can use it for a long time with confidence..
Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

  • ✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
  • ✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
  • ✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
  • ✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
  • ✅5 IN 1:Multi-purpose household and welding repair tool kit.
Check Stock

3 Pin Waterproof Connector, Industrial Solder Power Connector, Aviation Electrical Connectors Work with Electric Motorcycle, Yacht, and Other Indoor/Outdoor Wire Connectors(Metal+Plastic)

  • 3 Pin Connector Specifications: The working voltage of the power connector can reach AC 500V, and the rated current is 20A. General wire diameter: Φ9.0mm～Φ13.0mm.Cable specification: 2.5 --4.0mm²/14-12 AWG.Contact resistance 003c1.0mΩ.Waterproof Protection level: IP67. Package list: 1 male plug + 1 female socket..
  • High-Quality Material: Our 3 Pin Connector uses a PBT material shell that is imported from abroad with stability, compression, anti-explosion, and anti-deformation. Use zinc alloy material flanges seat, against high-frequency noise and electromagnetic interference. Using gold-plated contact with the superior performance of corrosion resistance and electrical conductivity effectively deals with temperature rise..
  • Easy to Install Cable Wire Connector: Cable connection type: Soldering. Cable in-line, threaded coupling, quick connect, solder plug & socket. Note: Prohibited to charged inserted. The wiring welding temperature requirement is 380℃±40℃, operation time: at each point does not exceed 3 seconds..
  • Perfect Waterproof Wire Connectors: The waterproof connector can be up to waterproof IP67 protection level when connected, its rigid spring snap fastening self-locking device waterproof ring is well water-resisting. Even in harsh outdo....
Check Stock