Categories

Best Welding Rolls

S7 200Amp MIG Welder,110V&220V 3 in 1 MIG&ARC&Lift TIG Gas/Gasless Inverter Multi-Process Dual Voltage Welding Machine

  • ️★Multi-Functions In One Machine: IGBT Full 30-200Amp(Max)With Digital Display, Reliable Quality And Stable Performance.Suitable For MMA, Lift TIG, Flux MIG, Gas MIG,Big Enough To Handle 2 To 10 Pound Rolls Of Wire.
  • ️★110V/220V Powerful Machine: Up To 200A Output Current That Can Weld Mild Up To 5/32 Inch (4.0mm) Plate.MAX 5KG Rolls Of Wire.030"(0.8mm) With Solid Core Wire, And .035" (0.9mm)With Flux Core Wire.Can Handle E7018 Basic Electrode.
  • ️★Include:MIG Gun(2.8M), Ground Clamp And Holder (2M),220V To 110V Adapter , Drive Roller Wheel,Contact Tips,Gass Nozzles，Welder Operation Manual . Processes Recommended-MIG-Cast Iron,Copper,Brass,Titanium, Magnesium Alloys. Flux Cored- Aluminium, Cast Iron,Copper,Brass,Titanium.
  • ️★Synergic Control,Automatic Change Of The Voltage & Wire Feeding Speed By Adjusting The Amperage Or Choosing Different Thicknesses.The MIG-200is Capable Of True lift TIG(Need Buy Extra Tig Lift Torch,Not Included Inside Product) Welding As Well As Stick Welding ,The MIG-200 Is An Intuitive Synergically Designed MIG/MAG/ Flux Core/ARC/Lift TIG Welding Machine Safety, Automatic Protection Function For Over-Current, Over-Voltage And Over-Heating.
Check Stock

Nueve Deer 1/2 inch Hardware Cloth 48 inch x 100 Foot 19 Gauge (100pcs Fence Staples Included) Hot Dipped Galvanized After Welding Chicken Wire Mesh Roll Wire Fencing Wire Cloth

  • 【Low Defective Rate】 We especially understand that you are afraid of buying a product of poor quality, such as bad welding, missing wires, etc. All product of Nueve Deer hardware cloth are manually rechecked, the bad welding rate is less than 0.0003%.
  • the poor galvanized area rate is less than 0.1%.
  • and the lost wire rate is less than 0.001%. Please rest assured to buy our products!.
  • 【Uniform Mesh】 You definitely want your works to look extra perfect, which requires the hardware cloth rolls you buy to have very perfect welding. When you open it, our product looks flat or has a perfect arc, and the size of each hole is the same. After works is done, you'll be amazed at how good Nueve Deer's products are..
  • 【Sturdy Structure】 When you use these galvanized wire fences for a few years, some products will fall off your fixing stand, and some will be damaged by animal impact. Nueve Deer's products have undergone the impact test, compared to similar products, we have increased the welding area by 15% to prevent this from happening. Although these increased welding areas seem to be nothing, we did thousands of test..
  • 【Long Lasting】 You don't need to replace these hardware cloths every year. We have selecte....
Check Stock

ETOSHA 140Amp MIG Welder, Flux Core Welder AC 110V Gasless Welding Machine with IGBT Inverter, Automatic Wire Feed Welders Portable Metal Welder No Gas 110 Voltage 140A Compact Welder with Welding Gun

  • Easy to Use: This welder features an automatic adjustment function, which is no need to match working voltage and feeder speed separately. With thickness adjustment knob to suit your different applications. Even beginners will find it simple to use..
  • High Efficiency: The welding machine uses 0.030/0.035in flux core wire. Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate. Big enough to handle 2.2 pound rolls of wire..
  • Safety Protection: MIG 140A IGBT Inverter welder, reliable and stable. Steel welder machine with electric choke control, less spattering, deep penetration and good formation. Automatic thermal safety protection, overload safety protection keep you safe..
  • Wide Applications: Lightweight 14.77lbs. The ergonomic handle design makes the welder machine very easy to carry. It is very suitable for Home DIY and Repair, Maintenance, Metal Fabrication, farm & road equipment..
  • Package Includes: MIG-140 Welder machine.
Check Stock

TROOZY × Rilon MIG Welder 135E, Flux Core Welder Machine, 110V IGBT Inverter with Inner Wire Feeder, Portable Gasless Welding kit 100A DC, Yellow

  • Beginner-friendly: No need for expertise. Use ONE knob to switch on/off while adjusting plate thickness by the original welding machine chip, and intelligently identify the welding material to automatically match the voltage and wire feed speed.
  • Continuous High Efficiency: Leading industrial-level IGBT inverter ensures an exquisite welding process through Infinite Voltage and Closed-loop control of wire feeding speed, guarantees smooth arc start, more stable welding with less spatter.
  • Energy Saving: Reduce power consumption and increase the durability of fan with the smart high-speed cooling system that automatically switches according to component temperature. It also helps keep machine Components clean, reducing machine failure rates.
  • CSA Certification: With overheat, overcurrent, overvoltage, under-voltage protection and trusted CSA certification, also adapts to 15% fluctuation of network voltage and can weld stably at 95~127V, this is a safe, reliable, and human-friendly welder.
  • Portable Design: Smaller body 12.5*5.3*9.4 inch, weighs 11.9lb, with shoulder strap, easy to carry and store. Thanks to the 60KHz efficiency inverter for increasing capacity.
  • Versatile: Applicable to multiple plates of steel, including mild steel, medium carbon steel, and high....
Check Stock

TOOLIOM 200M MIG Welder 3 in 1 Flux MIG/Solid Wire/Lift TIG/Stick Welder 110 / 220V Dual Voltage Welding Machine

  • Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders..
  • Multi-functions in one machine: Suitable for MMA, Lift TIG, flux MIG, gas MIG.
  • Powerful Machine: Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate..
  • Big enough to apply to 2 and 10 pounds rolls of wire. Ready to feed .030"(0.8mm) with solid core wire, and .035" (0.9mm)with flux core wire.Can Handle E7018 basic electrode..
  • Dual voltage input design: Welding machine can be plugged into 110（120）V / 220(230)V dual voltage (Automatic fitting)..
Check Stock

Stained Glass Supplies Solder for Stained Glass Solder 1 Lb Spool and 2 Rolls Electrical Conductive Copper Tape 1/4 Inch for Paper Circuits Jewelry Repairs

  • Package includes: you will receive 1 roll of solder solid core in 1 lb and 2 rolls of conductive adhesive tapes of 1/4 inch wide and 98.43 ft long for wrapping and soldering in the glass crafting process. Note: in order to provide ideal welding results, the solder contains rosin core, slight smoke is normal, please use in a ventilated place.
  • Stable and reliable: solder plate material ratio is reasonable, uniform melting point, good fluidity, can present a regular smooth appearance. The melting temperature is 361-421 degrees Fahrenheit. Note: to ensure the welding effect, please wrap the edges of glass with copper foil first.
  • Good adhesive: the stained glass copper foil tape has nice adhesion to a variety of surfaces, resulting in a smooth surface, which also has an easy-to-peel backing for long-term use.
  • Please be careful and wear appropriate gloves during the wrapping process of glass and other material with pointed edges to avoid scratches.
  • DIY exquisite crafts: this set of electrical conductive tape and solder can meet various needs of glass handicraft makers.
  • The copper tape 1/4 inch allows you to draw fine lines and get smooth glass pieces, and soldering wire for stained glass can make your glass pieces firmly welded together, to assist you in the ....
Check Stock

EMILYPRO Sanding Rolls/Plumbing Sanding Cloth 1.5\ x 11yd (33 ft) / Plumber's Double Side Open Mesh/Aluminum Oxide Grit #80-1Roll

  • 【Function】 The sanding rolls is mainly designed for plumbers to remove residue and renew surface appearance for tubed before welding, such as copper, brass, aluminum pipes etc..
  • 【More Usage】The silicon carbide abrasive rolls also ideal for woodworking, furniture repair, automotive body working, fiberglass or metal treatment, paint removal etc, and any other projects which suitable for hand sanding or combine with wood lathes turning spindle to work..
  • 【Advantage】The plumbing sanding cloth is opened mesh, will not load up and clogging.
  • double sided abrasive article on strong mesh provide long lasting.
  • roll size allow flexible cut for multi demand.
  • waterproof and washable ensure reuse, can work in dry and wet condition..
  • 【Kindly Note】Due to the Silicon Carbide workmanship, there will be a few sand falling down during the working process, it's will not affect the working performance..
  • 【Dimension】1-1/2 inch x 10.9yd (3.8cm x 10m) / roll. Grit: #80. Package: 1roll(33FT )..
Check Stock

Forney Easy Weld 261, 140 FC-i Welder, 120V, Green

  • WELDER INCLUDES- 8' MIG gun, 8' ground clamp, Integrated handle with torch wrap and a 20A-15A adapter. Backed by a 12-month warranty.
  • PRODUCT SPECIFICATIONS- Dimensions: 16.75" (425.45 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters), Weight: 19 lbs. (8.62 kilograms), Gasless/flux-core welding only, Portable, Torch wrap, Infinite voltage and wire feed speed control, 120-volt input, 140 AMP output, Welds up to 1/4 in. (6.35 millimeters), Handles .030 in. or 0.35 in. wire, Includes: 8' MIG gun, 8' ground clamp and 20A - 15A adapter, Duty Cycle 30% @ 90A.
  • RECOMMENDED ACCESSORIES- Contact Tips (60170, 60171 and 60172),Welding Nozzles: (85336 and 85337), Diffuser: (85339), Flux Core MIG Wire: (42300 and 42301), Anti-Spatter Spray: (37030), Nozzle Gel: (37031).
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock

New 2022 PowerMTS 141Si MIG/TIG/Stick 140 Amp IGBT Welder 110v Input Voltage

  • All digital DC CC/CV Multi-Process inverter design with a compact frame is designed for true portability in mind..
  • Light weight design makes the unit extremely portable, ideal for jobsites and motorsports..
  • 4" and 8" Diameter wire spool capacity provides a good compromise for long duration welding and portability..
  • Flux-Cored capable with optional drive rolls, AND Spool gun Capable for MIG..
  • 2T and 4T operation for MIG and TIG operation.
Check Stock

1/4 Inch Mesh 24 Inch Tall x 5 Feet Long Hardware Cloth

  • 24inx5ft hardware cloth is 1/4in square mesh which is galvanized after welding is used in gardens, workshops and for everyday home projects.
  • 23 gauge galvanized hardware cloth with 1/4-inch openings.
  • Hardware cloth is a welded product that is galvanized later.
  • It can also be use as a guard for screen door bottom panels.
  • Multi use product that could be used as a base for craft projects and as a sieve.
Check Stock

Abaodam 1pc Fire Mat Floor Carpet Camping Protector Pad Camping Protective Pad High Temperature Cloth Golden Pocket Fiberglass Material

  • SANDPROOF PICNIC BLANKET-- The cloth is made of quality material, which can withstand the - lasting use..
  • WELDING BLANKET-- Rolls up for easy storage, you can easily store it when you don't use it..
  • PICNIC CUSHION-- It is easy to be folded, convenient for you to store and carry outside..
  • FIRE PIT PAD-- and oil-proof, can be a good helper in barbecue activity..
  • CLOTH-- Fire Pit Mat Fire Blanket Fireproof Mat The fine workmanship ensures the practicality and durability in outdoor camping..
Check Stock

5 x Sweet Scoops/ 5 x Ice Tongs Home Kitchen Stainless Steel Set Wedding Candy Buffet Bar New(#2)

  • Well Crafted, Food safe, Delicate and compact, Sturdy, Rust-resistant and very durable.
  • Multi purpose, serving appetizers, meat, steak, bread, salad, cookies, fried, hot dog, spaghetti, buffet, bbq, baking sugar cube, ice cube, lemon slice, jelly, cookie, marshmallows, shredded cheese, grated carrots, crescent rolls, hashbrowns, bacon, jam, soft cheese or pickle slices etc.
  • Special design, one side for Fork & one side for Spoon, more practical & stable for use.
  • Seamless welding, and built to last. Easy to grip and clamp fine.
  • Great for Serving tea party, coffee, breakfast, home party, wedding or daily use.!.
Check Stock

Lincoln 225A Gas Engine-Driven Welder K3458-1

  • 3 Year Warranty, 100 Day, 100% Satisfaction Guarantee.
  • ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control.
  • power to run stick electrodes up to 5/32 in. Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation.
  • Package includes a Tweco Fusion 180 MIG gun with Velocity consumables, Victor Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls., 17v Tig Torch and Electrode holder.
  • Spool Gun Ready to MIG Aluminum with optional Spool Gun.
Check Stock