Categories

Best Wet Tile Cutter

ABN Tile & Mosaic Nipper, Cutter Pliers with Carbide Trimming Tips

  • [Fit for Your Tool Kit]: When you need to trim and cut porcelain or tile, depend on the ABN Tile Cutter Hand Tool Ceramic tile Cutter.
  • Use this Manual tile cutter porcelain tile cutter when working on flooring, walls, mosaics, and more.
  • [For Your Project]: Tile cutting tools ceramic cutter allows you to make quick and easy cuts.
  • Use tile cutter tools when it comes to irregular cuts for customizations in tile or stonework.
  • [Built to Last]: Tile manual cutter constructed of chrome vanadium for strength and longevity.
  • No need to worry about tile cutter hand tool ceramic hand tile cutter breaking or bending under the pressure.
  • [Comfort Grip]: Tile cutter includes soft rubber coated handle grips.
  • Tile hand cutter wall tile cutter handle ensures control while in use so that there will be no slips while in use.
  • Handles measure 8 inches (20cm) in length.
  • [Measurements]: The sharp, straight carbide-tipped ends of the manual ceramic cutter have a cutting surface of over 3/4 inches (1.9cm) for tile.
  • Ceramic tile cutter tools spans up to 1/2 inches (1.27cm)....
Check Stock

PEAKIT 7 Inch Tile Saw Blade Dry Wet Cutting 7\ Porcelain Diamond Tile Blade 7in Ceramic Tile Cutter Blade Disc

  • FIT SIZE: 180 x 10 x 1.6 x 22.23 mm. Outer diameter: 7 inch / 180mm. Thickness: 1.6mm. With reducer washer suitable for most tile saws and hand-held angle grinders with a 7/8" or 5/8" Arbor..
  • WIDE APPLICATION: Universal for dry or wet cutting. The super thin tile blades are designed for cutting porcelain, ceramic tile, granite, sandstone quartz, marble, slate, and cement backer board..
  • HIGH PERFORMANCE: Turbo mesh rim offer fast and smooth cutting experience for you with minimal chipping. PEAKIT premium-grade 7" diamond saw blade ensures a longer service life..
  • NOTICE: Wear protective equipment when using the tile cutter blade. And make sure that the direction indicated on the tile blade is the same as the direction of rotation of the tile cutter..
  • GUARANTEE:. For any questions, please Feel Free to Contact Us. We will respond to you Within 12 Hours and Give You a Good Solution..
Check Stock

Tanzfrosch 4.5 inch Diamond Saw Blade 4.5\ Cutting Disc Wheel for Cutting Porcelain Tiles Granite Marble Ceramics Works with Tile Saw and Angle Grinder (3 Pack, Blue)

  • ★FIT SIZE: Outer Diameter: 115mm (4.5 inch). Thickness: 1.2mm. Suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor..
  • ★HIGH PERFORMANCE: Tanzfrosch tile cutter blade outer edge is plenty strong, X teeth offer fast and smooth cutting. Thicker center to avoid vibrations and wobbling. High-Performance diamond matrix provides long life and enhanced material removal..
  • ★COMPATIBLE MODELS: It can be used on different types of angle grinders and tile cutters for Wet and Dry cutting..
  • ★WIDE APPLICATIONS: Tanzfrosch tile cutter blade is designed for cutting porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate, cement backer board . It will be a perfect partner for tile installers and general homemade DIYers..
  • ★BUY WITH CONFIDENCE: If any of our products fail to meet your expectations, please get in touch with us and we will try our best to resolve the issue..
Check Stock

Tysun 5 Pcs 4.5 inch Diamond Saw Blade Tile Blades Cutting Disc Wheel for Cutting Porcelain Tiles Granite Marble Ceramics

  • ★【High Quality】Super thin and unique X-style teeth for high performance, offer fast and smooth cutting. Thicker center to avoid vibrations and wobbling..
  • ★【Size】Outer Diameter: 115mm (4.5 inch). Core: 22MM(Come with 20MM Ring). Thickness: 1.2mm. Suitable for most tile saws and hand-held angle grinders with a 7/8" and 4/5" Arbor..
  • ★【Compatible with】It can be used on different types of angle grinders and tile cutters for Wet and Dry cutting..
  • ★【Wide Applications】Universal for dry or wet cutting. Tysun diamond saw blade is engineered for extremely smooth cutting of porcelain, granite, marble, ceramic tile, etc..
  • ★【Package Includes】5 Pcs 4.5 inch Tile Cutter Diamond Saw Blades..
Check Stock

Goplus 36-Inch Manual Tile Cutter, Professional Tile Cutter with Tungsten Carbide Cutting Wheel, Anti-sliding Rubber Surface and Removable Scale, Suitable for Ceramic Floor, Ceiling Tiles

  • 【Powerful Cutting System】This tile cutter has tungsten carbide cutting wheel for smooth cutting and durable. This 36inch tile cutter equipped with deep groove ball bearings, which is higher than other normal strengths to ensure perfect sliding. The 1650 LBS pressure of manual tile cutter makes cutting easier and more labor-saving..
  • 【Support Accurate Multi-angle Cutting】Equipped with a high-precision ruler, this porcelain tile cutter can perform parallel and angled cutting (from 0 ° to 60 °) and suits all kinds of tiles. With a stretchable scale, the tile cutter hand tool can cut a tile which is maximum size of 36 inches and maximum thickness of 0.5-inch (14 mm)..
  • 【Stable and Premium Frame】Made of heavy iron material, the 36 inch tile cutter is sturdy and the solid I-shaped tack does not deform. The wide and thick base, non-slip rubber pad and telescopic stand provide additional stability for larger tiles. The protective covers on the bottom provide stability while protecting the ground and ceramic tile cutter..
  • 【Ergonomic and Comfortable Handle】Curved and extended handle is designed according to users’ habits, which make cutting operation easier. Meanwhile, the non-slip plastic on the handle surface increases the comfort sense during....
Check Stock

PEAKIT Tile Cutter Blade 4.5 Inch Porcelain Diamond Blade Ceramic Cutting Disc Wheel for Angle Grinder Reversible Color

  • ✔ Peakit Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you. Thicker center to avoid....
  • ✔ Our Diamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade..
  • ✔ This 4 1/2 inch tile cutter blade features a 3/8" diamond rim, can be used dry or wet, fits most tile saws and hand-held angle grinders with a....
  • ✔ It is the ideal diamond saw blade for tile installer, general contractors, home made DIYers and tradesmen..
  • ♥ What you will get: fast 4 1/2" diamond blade 1 pcs, lifetime warranty against warping, cracking and material defects, superior customer service..
Check Stock

3pcs 4.5 Inch Diamond Saw Blade Tile Blade, SUNJOYCO Diamond Cutting Wheel for Angle Grinder, Dry Wet Smooth Cutting for Porcelain Tile Concrete Granite Ceramic Masonry, 4/5\-7/8\ Arbor

  • ...oling holes ensure longer service life. It can be dry-cut or wet-cut, and the cutting effect is better with water..
  • WIDE APPLICATIONS: This super thin tile blade is designed for cutting ceramic, porcelain tile, granite, marble, and vitrified tile, brick, sandstone. It can work as a porcelain tile blade, ceramic tile cutter, granite blade, and other thin masonry blades. It's an ideal diamond saw blade for tile installers, contractors, homemade DIYers, and tradesmen..
  • HIGH QUALITY: This diamond blade for tile is well made and has brilliant safety and durability. High-quality diamond material makes sure it lasts longer and causes less heat and very little wear when cutting. it also meets the demands of dry and wet cutting..
  • SATISFACTION GUARANTEE: We provide a two-year warranty for the 3pcs diamond saw blade set, so please purchase with confidence! If you have any concerns or questions, please feel free to contact us..
Check Stock

Keadic Glass Tile Cutter Tool Kit, Glass Breaking Pliers, Tile Cutter Hand Tools Set with 6mm Alloy Steel Blades, Spacers, Special Oil Bottles Tape Measure & Cut-resistant Gloves

  • Complete Glass & Tile Cutter Tools Set --- In this easy glide glass & tile cutter hand tools kit, you can get 1 glass tile cutter & 2 pieces 6mm premium alloy steel blades, 1 glass breaking plier & 3 spare spacers, 2 special oil bottles, 1 meassuring tape (1m/3 FT) and 1 pair of cutting-resistant gloves. Everything you need to cut glass, tile, mosaic, mirrors, diamond & minerals are included!.
  • Warm Tips --- The glass tile cutter tools can be used for cutting glass, mirrors, wall tiles, facing tiles, ordinary whole tiles, glazed tiles within 0.47 inches, but not for cutting whole body tiles, vitrified tiles, marble tiles and polished tiles. Please make sure that our cutter is suitable for your own tile type, to avoid affect your use..
  • Premium Glass Breaking Pliers --- Made of high grade steel, more durable and better rust-resistance, can be used to achieve a controlled break in the glass, tiles, resulting in a clean, right-angled cut edge. The extended swivel handle makes it easier for the user to release the force..
  • Steps of Cutting Glass/Tile --- Firstly, mark the cutting position with the meassure tape, then align the top of the glass or tile, use the glass cutter to cut a straight line with even force. Nextly, align the cut section of breaking plier ....
Check Stock

Marshalltown 17” Tile Cutter Cuts Ceramic Porcelain Mosaic Tile DIY TC17

  • The MARSHALLTOWN Tile Cutter is easy to use, portable, and dust-free, making it an ideal tool for DIYers.
  • This tile cutter is versatile and makes straight tile cuts to ceramic, porcelain, and mosaic tile up to 17 Inch long and a .5 Inch (12 mm) thick. You can also cut tile up to 12”x12” (305 x 305 mm) at a 45-degree angle for different tile installations..
  • This tiling tool has a two-rod rail system that allows smooth operation as the tungsten carbide scoring wheel scores the tile for quick, easy cuts. It also includes an adjustable measuring guide for precise cuts..
  • A durable 5/8 inch (15 mm) tungsten carbide scoring wheel is designed for performance. The tile cutter also includes an adjustable measuring guide for precise cuts..
Check Stock

ZELCAN Manual Tile Cutter, Hard Alloy Wheel Cutter with Ergonomic Handle for Porcelain Ceramic Tiles, Laser Guided Precision, Adjustable Measurement Ruler, Anti-Skid Feet (48 inch)

  • 48" MANUAL TILE CUTTER: This tile cutter with adjustable stabilizer from Zelcan makes quick and easy work of your home improvement jobs, cutting clean and precise cuts up to 48 inches straight and 33 inches diagonally through ceramic, porcelain, granite, and other tiles up to 0.6 inches thick.
  • PRECISION SCORING: Our flooring tool features a cutting edge laser guide, built in caliper, and metal ridge that runs perfectly parallel to the path of the scoring wheel to ensure you cut your tiles with utmost precision.
  • SUPERIOR STABILITY: The two supporting feet swing out up to 180 degrees to keep everything securely balanced, while the rubber pad anchors ensure your tile cutter stays in place even with applied cutting force.
  • DURABLE CONSTRUCTION: This bathroom floor tile cutter's corrosion resistant steel rails, expertly designed bearings, and heavy duty aluminum base let you handle hassle-free retiling for years to come.
  • EASY OPERATION: Simply use the laser guide to line up your tile with the cutting wheel, score the tile by applying light pressure on the handle, and then gently apply more downward pressure until the tile snaps.
  • make the most your home or commercial space with the assist of Zelcan's manual flooring tile cutter!.
Check Stock

Mosaic Tile Cutter Glass Tile Cutter Hand Tool Mosaic Tile Nipper Manual Mirror Cutter Plier for Home DIY Cutting Mosaic Glass Ceramic Mirror

  • ➤【Mosaic Tile Cutter 】The cutting wheel of mosaic tile nipper adopts high hardness tungsten carbide, with the characteristics of rust resistance and wear resistance..
  • ➤【Glass Tile Cutter Hand Tool】The TPR rubber handle allows you to hold and use it effortlessly, very suitable for DIY mosaic glass crafts, used for home improvement, kitchen and bathroom..
  • ➤【Wide Applications】Our tile cutter can cut and break glass or ceramic tiles with a max thickness of 9.5mm (0.37"), used for cutting mosaic, mirror, ceramic, porcelain, glass tile and stained glass quickly..
  • ➤【Easy to Use】1. Use the scoring wheel to draw scratches on glass or tiles. 2. Aligned the scratch with the middle part of glass cutting tool. 3. Break the tile or glass into two pieces..
  • ➤【What You Get】You will get 1pc manual tile cutter and 1 pair of gloves..
Check Stock

ZELCAN Manual Tile Cutter for Ceramic Tiles or Porcelain Tiles| For Professional, DIY, or Weekend Warriors| Adjustable Laser Guide for Precision Cutting| Anti-Skid Feet| Ergonomic Handle (40 inch)

  • 40" MANUAL TILE CUTTER: This tile cutter with adjustable stabilizer from Zelcan makes quick and easy work of your home improvement jobs, cutting clean and precise cuts up to 40 inches straight and 28 inches diagonally through ceramic, porcelain, granite, and other tiles up to 0.6 inches thick.
  • PRECISION SCORING: Our flooring tool features a cutting edge laser guide, built in caliper, and metal ridge that runs perfectly parallel to the path of the scoring wheel to ensure you cut your tiles with utmost precision.
  • SUPERIOR STABILITY: The two supporting feet swing out up to 180 degrees to keep everything securely balanced, while the rubber pad anchors ensure your tile cutter stays in place even with applied cutting force.
  • DURABLE CONSTRUCTION: This bathroom floor tile cutter's corrosion resistant steel rails, expertly designed bearings, and heavy duty aluminum base let you handle hassle-free retiling for years to come.
  • EASY OPERATION: Simply use the laser guide to line up your tile with the cutting wheel, score the tile by applying light pressure on the handle, and then gently apply more downward pressure until the tile snaps.
  • make the most your home or commercial space with the assist of Zelcan's manual flooring tile cutter!.
Check Stock

Montolit Masterpiuma 93P5 Power 5 Ergonomic Manual Tile Cutter 36" (93cm) Cutting Tool For Tough and Delicate Large Format Glass and Ceramic Tiles for Floor and Wall Tile Installation

  • Montolit tile cutter 93P5 is suitable for cutting tiles up to 36" in length, supports diagonal cutting up to 26"x26" in size, and can cut tiles up to 3/4" (2cm) thick.
  • The Montolit ceramic tile cutter frame is sized and structured in the points of greatest stress with the insertion of “reinforcement brackets” that optimize the machine's behavior for front cuts, thick cuts, or full-body porcelain..
  • The tile cutter hand tool features an oversized goniometric square that can rotate both to the right (+ 45 °) and to the left (- 45 °), allowing precise cuts at different angles.
  • An expanded ceramic cutter support surface or robust die-cast aluminum wings are perfectly integrated into the frames, ensuring improved support to large tiles with diagonal cuts without leaving the machine profile.
  • The tile cutter features a double trestle splitting, which can be closed for normal cuts and opened for cuts on the corner or for mosaic ceramic tile sheets.
Check Stock