Best Wheel Centric Ring

Customadeonly 2 Pieces 0.47″ 12mm Hub Centric Wheel Spacers Thread Pitch 12×1.5 Bolt Pattern 5×4.75 5×120.65 5×120.7 Center Bore 70.3mm

• Please be sure to confirm the fitment & compatibility prior to purchase – If you are not sure if this is applicable to your vehicle -please feel free to ask us! THIS MAY NOT FIT ON THE FRONT HUB OF THE CAMARO IF THE FACTORY LIP IS MEASURED MORE THAN 12MM (HEIGHT).
• QTY: 2 Wheel Spacers .Designed to improve the handling & appearance of your vehicle Extended studs are required for proper installation (Not included).
• Made with high grade T-6 Aluminum – CNC machined with precised fit.
• Anodized Silver -Hub centric design w/o Wheel centric ring.
• Fit Vehicles With Bolt Pattern: 5×4.75 , Center Bore: 70.3mm & Thread Pitch: 12mm x1.5.

ECCPP 4X 1.5 inch Wheel Spacers Adapters hub Centric 6x5.5 to 6x5.5 6x139.7mm to 6x139.7mm 14x1.5 Studs for 1999-2018 for Silverado 1500 Wheel Spacers 1995-2018 for Tahoe Wheel Spacers

• 【1.5 INCH WHEEL SPACERS HUB CENTRIC SPECIFICATIONS】4PCS Wheel Spacers 6 LUG: 6x5.5" (6x139.7mm) bolt pattern,78.1mm(3.07") Center bore,M14x1.5 thread pitch,1.5"(38mm) thick..
• 【6x139.7 WHEEL SPACERS Compatibility】Fit for 1999-2018 for Silverado 1500|1995-2018 for Tahoe|2007-2013 for Avalanche|2000-2012 for Suburban 1500|2002-2006 for Avalanche 1500.
• 【6x5.5 hub centric wheel spacers About the thickness】Please confirm about the Fender Gap,this decides the thickness range should be fitted. For a car without leveling lifting,to avoid rubbing,the thickness of wheel adapters should be less than the fender gap. For example,if your fender gap is 1.5",It is better to choose spacers which is less than 1.5" thick.
• 【HUB CENTRIC WHEEL SPACERS 6X5.5 TO 6X5.5 Benefits】The spacers 6x5.5 Widen your vehicle wheels base by allowing for a more aggressive stance, rubbing easily and instantly,greatly improve the vehicle stability!.
• 【6x139.7mm wheel spacers hub centric 】The body of 6 lug wheel spacers adapters is made of Forged aluminum. Meanwhile Forged heat-treated and hardened ISO/DIN 10.9 studs deliver strength.

VLAOSCHI Red Alloy Aluminum Hub Centric Rings 78.1 to 108 - Performance Wheel Hubcentric Rings for 78.1mm Vehicle Hub with 108mm Center Bore Rims - Pack of 4

• 【The Hub Centric Ring Advantage】Because the modified wheel hub for different brands of vehicles for use, most of the factory to increase the size of the center hole. In order to fit the wheel with the original car better, through the ring to reach the gap with the original car just a good gap, so will not loose the lug nuts of the vehicle hub to prevent 80KM-120KM produce steering wheel jitter situation..
• 【Fine Workmanship Size Precision】These Hubrings are made of High Quality 6061 Aluminium Alloy, CNC Machined, Red Anodic Oxidation, nice looking and corrosion resistant, heat resistant and durable..
• 【Hub Ring Inner Diameter】I.D : 78.1mm, must match Vehicle hub bore.
• 【Hub Ring Outer Diameter】O.D : 108mm, must match wheel center bore.
• 【Fitment】 Buyer is responsible for ordering the correct size. It is necessary that you measure your vehicle hub bore size and your wheel center bore before purchasing. If you are not 100% sure of your vehicle hub size, send us email and we will be happy to look it up for you. Just provide the Year, Make, Model of your vehicle..

15 inch Hubcaps Best for VW Volkswagen - (Set of 4) Wheel Covers 15in Hub Caps Silver Chrome Black Rim Cover - Car Accessories for 15 inch Wheels - Snap On Hubcap, Auto Tire Replacement Exterior Cap

• 【The Hub Centric Ring Advantage】Because the modified wheel hub for different brands of vehicles for use, most of the factory to increase the size of the center hole. In order to fit the wheel with the original car better, through the ring to reach the gap with the original car just a good gap, so will not loose the lug nuts of the vehicle hub to prevent 80KM-120KM produce steering wheel jitter situation..
• 【Fine Workmanship Size Precision】These Hubrings are made of High Quality 6061 Aluminium Alloy, CNC Machined, Red Anodic Oxidation, nice looking and corrosion resistant, heat resistant and durable..
• 【Hub Ring Inner Diameter】I.D : 78.1mm, must match Vehicle hub bore.
• 【Hub Ring Outer Diameter】O.D : 106mm, must match wheel center bore.
• 【Fitment】 Buyer is responsible for ordering the correct size. It is necessary that you measure your vehicle hub bore size and your wheel center bore before purchasing. If you are not 100% sure of your vehicle hub size, send us email and we will be happy to look it up for you. Just provide the Year, Make, Model of your vehicle..

Wheel Accessories Parts Set of 2 Wheel Adapters 5x4.50 (5x114.3) to 5x4.50 Hub Centric 70.50mm Hub Bore M14x1.50 Thread, Hub Centric to Vehicle and Wheel, Billet Aluminum Wheel Adapters 1\ Thick

• T6061 Billet Aluminum Wheel Adapter / Spacer. Anodized Finish. OE Replacement Thread Pitch M14x1.50. Lug Nuts Included - 70.5 ID/OD Hub Centric Fit.
• Fitment: Fit Ford 5x4.5 Bolt Pattern / Bolt Circle vehicles with 70.5 ID/OD Hub Centric to vehicle hub and wheel centerbore.
• Specs: T6061 Billet Aluminum Adapter / Spacer - 1.00" Thickness. M14x1.50 Lug Nuts included with matching stud threads on adapter M14x1.50. Hub Centric Fitment insures perfect balance..
• Finish: Premium anodized adapter / spacer finish with matching black studs and dual coated black finish lugs..
• Construction: Built from the highest grade aircraft quality T6061 Billet Aluminum. Coyote Premium Wheel Accessories. Overall diameter of adapter 150mm with Hub Centric ID 70.5 and Wheel Centerbore OD 70.5.

Supreme Suspensions - 2' Hub Centric Wheel Spacers for 2007-2021 Toyota Tundra 2WD 4WD - BP: 5x150mm / CB: 110mm / Studs: M14x1.5 [4pc Black Pack] - 4 Tire Valve Caps Included

• COMPATIBLE WITH 2007 – 2021 Toyota Tundra (2WD 4WD). *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
• CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
• SPECIFICATIONS: 2 Inches Thick, 5 x 150mm Bolt Pattern, M14 x 1.5 Studs, 110mm Center Bore | NOTE: Spacers are Hub-Centric to ensure the best centered / balanced install. No Ring Needed..
• BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. | Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
• UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to prevent rust, corrosion, and chemical damage.

Supreme Suspensions - 4pc Set [Black] 2' Hub Centric Wheel Spacers Kit for 2015-2022 Ford F-150 2WD 4WD - BP: 6x135mm / CB: 87mm / Studs: M14x1.5 - Valve Stem Caps Included

• COMPATIBLE WITH 2015 – 2022 Ford F-150 (2WD 4WD). *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
• CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
• SPECIFICATIONS: 2 Inches Thick, 6 x 135mm Bolt Pattern, M14 x 1.5 Studs, 87mm Center Bore | NOTE: Spacers are Hub-Centric to ensure the best centered / balanced install. No Ring Needed..
• BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. | Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
• UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to prevent rust, corrosion, and chemical damage.

Supreme Suspensions - 4pc Set [Black] 2' Hub Centric Wheel Spacers for 2004-2014 Ford F-150 2WD 4WD - BP: 6x135mm / CB: 87mm / Studs: M14x2 [4 Tire Valve Caps Included]

• COMPATIBLE WITH 2004 -2014 Ford F-150 (2WD 4WD). *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
• CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
• SPECIFICATIONS: 2 Inches Thick, 6 x 135mm Bolt Pattern, M14 x 2 Studs, 87mm Center Bore | NOTE: Spacers are Hub-Centric to ensure the best centered / balanced install. No Ring Needed..
• BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. | Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
• UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to prevent rust, corrosion, and chemical damage.

Supreme Suspensions - 4pc Set [Black] 2' Hub Centric Wheel Spacers for Jeep Wrangler JK/Commander 2WD 4WD - BP: 5x5 / CB: 71.5mm / Studs: 1/2' x20 [4 Tire Valve Caps Included]

• COMPATIBLE WITH 2007 – 2018 Jeep Wrangler JK (2WD 4WD) and 2006 – 2010 Jeep Commander (2WD 4WD). *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
• CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
• SPECIFICATIONS: 2 Inches Thick, 5 x 5″ (5 x 127mm) Bolt Pattern, 1/2″ x 20 Studs, 71.5mm Center Bore | NOTE: Spacers are Hub-Centric to ensure the best centered / balanced install. No Ring Needed..
• BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. | Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
• UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to prevent rust, corrosion, and chemical ....

Supreme Suspensions - 2' Hub Centric Wheel Spacers for Toyota Tacoma PreRunner 2WD & Tacoma 4WD - BP: 6x5.5 / CB: 106mm / Studs: M12x1.5 [4pc Black Pack] - 4 Tire Valve Caps Included

• COMPATIBLE WITH 1995 – 2020 Toyota Tacoma PreRunner (6-Lug 2WD) and 1995 – 2021 Toyota Tacoma (4WD). *Will NOT work on vehicles with DUALLY wheels or manual locking hubs. **Please verify fitment compatibility prior to ordering..
• CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
• SPECIFICATIONS: 2 Inches Thick, 6 x 5.5″ (6 x 139.7mm) Bolt Pattern, M12 x 1.5 Studs, 106mm Center Bore | NOTE: Spacers are Hub-Centric to ensure the best centered / balanced install. No Ring Needed..
• BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. | Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
• UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to p....

Wheel Accessories Parts Set of 2 Wheel Adapters Hub Centric 6 Lug Wheel Adapter/Spacer Bolt Pattern: 6x5.5 to 6x5.5 (6x139.7 to 6x139.7) 78.1 Hub Bore (1.50\ Thick)

• T6061 Billet Aluminum Wheel Adapter / Spacer. Anodized Finish. OE Replacement Thread Pitch M14x1.50. Lug Nuts Included - 78.10 ID/OD Hub Centric Fit.
• Fitment Trucks with 6x5.50 Bolt Pattern / Bolt Circle. 78.1 Hub Centric to vehicle hub and 78.1 wheel centerbore..
• Specs: T6061 Billet Aluminum Adapter / Spacer - 1.50" Thickness. M14x1.50 Lug Nuts included with matching stud threads on adapter M14x1.50. Hub Centric Fitment insures perfect balance..
• Finish: Premium anodized adapter / spacer finish with matching black studs and dual coated black finish lugs..
• Construction: Built from the highest grade aircraft quality T6061 Billet Aluminum. Coyote Premium Wheel Accessories.

Fred Goeske - Dually Wheel Spacer—2 inches thick—Compatible with Ford F350 8 x 200MM Includes 2 Spacers

StanceMagic Hubcentric Rings (Pack of 4) - 64.1mm ID to 73.1mm OD - Black Poly Carbon Plastic Hubrings Hub - Only Compatible with Honda Acura with 64.1mm Vehicle Hubs and 73.1mm Wheel Centerbore

• StanceMagic Hub Centric Rings made of corrosion resistant polycarbonate plastic. These hubrings will reduce or eliminate vibrations caused by a gap between your aftermarket wheel's centerbore and your wheel hub. Having a gap will prevent your wheel from centering properly during installation, leading to vibrations..
• HUB RING INNER DIAMETER: 64.1mm (Your vehicle's hub lip diameter needs be this size).
• HUB RING OUTER DIAMETER: 73.1mm (Your wheel's center bore needs to be this size).
• Compatible With Acura 1997-2003 CL, 2006-2011 CSX, 2013-2021 ILX, 1997-2001 Integra Type R, 1986-1990 Legend, 2001-2021 MDX, 2007-2021 RDX, 1995-2012 RL, 2014-2021 RLX, 2002-2006 RSX, 1995-2014 TL, 2015-2021 TLX, 2004-2014 TSX..
• Compatible with Honda 1990-2021 Accord, 2006-2021 Civic, 2016-2021 Clarity, 1997-2021 CR-V, 2011-2016 CR-Z, 2003-2011 Element, 2016-2021 HR-V. Compatible with 2018-2021 Insight, 1995-2021 Odyssey, 2019-2021 Passport, 2003-2021 Pilot, 1992-2001 Prelude, 2006-2021 Ridgeline. Also compatible with Tesla 2012-2021 Model S, 2015-2021 Model X, 2017-2021 Model 3, 2020-2021 Model Y..