Categories

Best Wheel Hub Puller

OEMTOOLS 25749 Wheel Hub Removal Tool, Green Hub Bearing Removal Tool, Hub Buster Tool Prevents Axle Removal or Damage, Works for 5, 6, and 8 Lug Hubs

  • Clean Break: Remove your damaged or frozen hub assembly without any risk of damaging the axle with this hub assembly removal tool.
  • Your Go-To Tool: The hub puller tool is designed to work with any configuration of axle-bolted hubs, including 5, 6, and 8 lug hubs.
  • If the Hub Fits: Hub removal is simplified with the 2-5/8” center-to-center hole pattern of this wheel hub puller, making installation easy and speeding up the hub removal process.
  • Shielded With Steel: Trust in your wheel hub remover’s longevity with its 3/4" steel backing plate and reinforced striking plate, giving it the strength to endure any wear and tear.
  • A Tool For the Ages: This wheel hub remover will resist rust and corrosion thanks to its high-quality steel construction, resulting in equipment you can rely on long-term.
Check Stock

ABN Wheel Bearing Puller Kit Hub Removal Tool Wheel Bearing Tool - Independent Suspension Roll Ball Bearing FWD RWD AWD

  • [No More Hammer or Shop Press]: The ABN Master Wheel Bearing Removal Tool and Wheel Hub Puller Tool Kit allows you to remove and install wheel hub and....
  • [Fits Your Vehicle]: Universal for front, rear, and all-wheel drive vehicles with independent suspension and pressed roller-ball bearings.
  • [Use on Seized-Up Assemblies]: Self-centering mechanism and thrust bearing design.
  • Use the round plate that corresponds to the diameter of your....
  • [Perfect Sizes]: Universal set includes 21 pieces that have A through U permanently printed labels.
  • Pusher washer disk driver sizes from 2.1 inches....
  • [Contents]: Wheel hub and bearing puller set and installation kit includes a remover tool, adapter shoes, pusher washers, receiver sleeves, nut-bolt,....
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is idea....
Check Stock

JOMBULL 9-Way Slide Hammer Puller Set, 19 pcs Rear Wheel Axle Hub Dent Shaft Puller, Slide Hammer Bearing Puller for Hub Seal

  • 【Durable】 Our 9-way slide hammer puller set is made of heat-treated forged steel, polished and chrome-plated to resist rust and wear, extending the service life..
  • 【Application】 The axle hub dent shaft puller is widely used for flanged rear axles, most front wheel drive hubs, pulling dents and other press fit parts..
  • 【Easy to operate】 You only need to install the axle hub dent puller on the part you want to remove, when pulling the T-handle, transfer the force to the shaft, the shaft drives the connecting end to pull out the part, repeat the above steps, the hub or bearing will be easily removed..
  • 【What you get】 Our 9-way slide hammer puller set includes, slide hammer, puller head, pulling adapter, cross block, inner/outer pulling jaw, hex jaw nuts and screws (3pcs), Vise-Grip adapter (single lead thread), sealing hook, 3-way puller head, cone, self-tapping screw and retainer..
  • 【Safe storage】 The slide hammer bearing puller comes in a blow molded case, sturdy and durable, and each piece has precisely sized compartments, easy to store and carry..
Check Stock

Kauplus Universal Hub Puller Universal Wheel Hub and Drum Puller Set

  • Adjustable sliding arms make wheel-hub removal quick, easy, and damage free wheel hub removal, won't distort wheel lugs.
  • 360 degree disc for sliding arm attachment mobility fits almost every vehicle.
  • Includes striking wrench and puller screw.
  • Durable forged constructed from alloy steel.
  • Maximum bolt circle of 7-1/2 inches (190mm).
Check Stock

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

  • [Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts.
  • [Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.
  • [Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • [Built to Last] Heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch....
Check Stock

Sunluway 6575 Hub Grappler Kit for on Vehicle Wheel Hub and Bearing Removal & Installation

  • 【UNIVERSAL FITS】 6 new adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers..
  • 【FUNCTION】This Hub Grappler Kit, replaces OTC 6575, which is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!.
  • 【PERFORMANCE】Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller Bar without the use of fasteners.
  • 【EASY TO USE】 With 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation. Easy to remove and install the front hub and bearing .Comes with Operation Manual..
  • 【A MUST HAVE】The Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun, which can minimize your serving time..
Check Stock

6575 Hub Grappler Kit Used on Vehicle Wheel Hub and Bearing Removal & Installation

  • 「FUNCTION」This Hub Grappler Kit, replaces OTC 6575, which is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!.
  • 「A MUST HAVE」The Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun, which can minimize your serving time.
  • 「EASY TO USE」 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation..
  • 「NICE DESIGN」 Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller Bar without the use of fasteners..
  • 「UNIVERSAL FITS」 6 new adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers..
Check Stock

BTSHUB 19pcs Front Wheel Hub Drive Bearing Removal Install Puller Tool Kit Universal

  • Universal Tools: 19 piece hub & bearing puller kit, providing the most effective removal and installation of wheel bearings.
  • Application: Comprehensive set for the removal and installation of front hub bearings. Suitable for most front wheel drive cars, vans, and light....
  • Drift Size: 2-3/16", 2-11/32", 2-7/16", 2-9/16, 2-19/32", 2-13/16", 2-7/8", 3-3/32", 3-5/16", 3". 3-13/32" and 3-19/32".
  • Package Includes: 3pc Drifts, 1pc Receiver Sleeve, 9pc Adapter Drift, 6pc Hub Screw 1pc plastic carrying case.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
Check Stock

WYNNsky 46 Pieces Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

  • Application: This 43-piece set can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application..
  • 4-Way Slotted Puller Yoke: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm× 11mm hole size, 93mm Max span..
  • Live-center Forcing Screw: It features Quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening..
  • Easy to Use: Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it..
  • Includes: 1pc yoke, different size of bolts, 3pcs 3/8’’×16×2‘’, 3pcs 3/8’’×16×3’’, 2pcs 3/8’’×16×4-1/2’’, 3pcs 3/8’’×24×1-1/2‘’, 2pcs 1/4’’ ×28×2-1/2’’, 2pcs 5/16’’ ×18....
Check Stock

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

  • [Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool.
  • Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.
  • [Built to Last]: No need to worry about this hub puller tool falling apart when you need it most.
  • Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • [Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past.
  • Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
  • [Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • [Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread.
  • Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects.
  • Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.
Check Stock

Bzsunway Front & Rear Bearing Puller Kit Wheel Hub Puller & Bearing Remover & Installer Kit Wheel Hub Remover & Installer Replace OEM 27213 (21pcs)

  • 【High Performance & Time Saving】  No need for other tools, no further calibration after disassembly and installation, the disassembly and installation of the wheel hub and bearing on the vehicle can be easily, accurately and safely completed, saving you more time and energy.
  • 【Wide Compatibility of Adapters】 Our wheel bearing puller/installer tools are specially equipped with suitable adapters for various models (like Volkswagen, BMW, Mercedes-Benz, etc).
  • 【Superior Quality】 Our wheel bearing removal tool set is made of high quality heavy duty stainless steel , durable and sturdy, and can hold up to the torque required to remove hubs and bearings. Ensure long-term use..
  • 【Must Have Tool Kit】 Use our wheel bearing stamping tools without need for a shop press. Whether it is a professional or DIY mechanic, our wheel bearing puller/installer can help you save more time. Tool Kit Use our wheel bearing stamping tools without need for a shop press, which is a must-have tool set for bearing disassembly.
  • 【Satisfactory Service】 If you are not satisfied with our products.You can request a full refund within 30 days to support a 12 month warranty.Professional and sincere service allows you to purchase without risk !.
Check Stock

Amerbm Wheel Bearing Removal & Installing Kit Hub Removal Set Back & Front Wheel Bearing Puller Tool Easily Removal The Bearing from Spindle/Bearing Housing

  • 2. Remove the bearing from the spindle/ bearing seat.
  • 【MAKE WORK EASIER】Amerbm wheel bearing puller kit can easily install the hub and bearing changes on most cars( without the use of a less safe....
  • 【UNIVERSAL APPLICATION】Self-centering mechanism and thrust bearing design. Universal for Most make and models of domestic, European and Asian....
  • 【PRODUCT INCLUDES】21 accessories have their own numbers (A through U, laser engraving), please refer to the picture for the specific size. Hub....
  • 【STRONG AND DURABLE】Made of #45 carbon steel, strong and durable, the surface is treated with anti-oxidation to maximize its service life. It will....
Check Stock