Categories

Best Wheel Hub Studs

ECCPP 4X 1.5 inch Hub Centric Wheel Spacers 6x135mm to 6x135mm 6 Lugs 14x2 for 2004-2014 for F-150 Wheel spacers 2003-2014 for Navigator Wheel spacers

  • 【WHEEL SPACERS 6x135 1.5 FITMENT】Fit for 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 for Expedition,2003-2014 for Navigator,2008-2014 for Mark LT.
  • 【6x135 HUB CENTRIC WHEEL SPACERS SPECIFICATIONS】Thickness:1.5" or 38mm.
  • 【HUBCENTRIC spacers】Hub-centric design with additional centering collar with perfect fit in mind makes the spacer function as a precise extension of the axle hub,ensuring precise wheel fitment while eliminating risks from vibration..
  • 【6x135 WHEEL SPACERS for F150 SAFETY】Made from the great true T-6 billet aluminum,with heat treated and hardened 10.9 grade bolts pre-installed..
  • 【Essential VERIFY FITMENT】 Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 14x1.5mm threads.
  • 2) You have more than 2 inch of space between your fender and your wheel/tire.
  • 3) Your factory wheel studs are shorter than 2 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 4) Wheel center bore needs to be no smaller than 78.1mm Advise torque specs 85-90 Ft/Lbs.
Check Stock

5mm Hubcentric 5x4.75 Wheel Spacers (70.5mm Bore) Compatible with Buick Cadillac XLR Chevrolet Blazer Corvette Camaro GMC S15 Pontiac GTO Tans Am Phoenix Trans Sport 5x120 5x120.65 2pcs

  • StanceMagic Hubcentric Wheel Spacers for vehicles with 5/120.65 (5/120.7 or 5/4.75") Bolt Pattern and 70.5mm Centerbore. Compatible with Chevrolet 1987-2005 Blazer, 1982-2003 Camaro (Rear Hub), 1984-2020 Corvette, 1982-2004 S10 (Rear Hub). Compatible with GMC 1982-1991 S15, 1991-2005 Jimmy, 1990-2004 Sonoma (Rear Hub). Compatible with Pontiac 1984-1997 Trans Am, 1990-1997 Trans Sport. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 5x120.65 (5x120.7 or 5x4.75") | Hub Center Bore: 70.5mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardwa....
Check Stock

StanceMagic - 1 inch (25mm) Hubcentric Wheel Adapters Spacers with Lip Converts 5x100 to 5x114.3 (Changes Bolt Pattern), 56.1mm Bore, 12x1.25 Studs, Compatible with Scion FR-S FRS and Many Subaru 2pcs

  • StanceMagic Hubcentric Wheel Adapter Spacers with Lip. CHANGES BOLT PATTERN. Vehicle must be 5×100 bolt pattern AND wheels must be 5×114.3 or 5×4.5 bolt pattern. Compatible with 2012-2016 Scion FR-S FRS, 2016-2021 Toyota 86. Compatible with Subaru 2012-2021 BRZ, 2002-2007 Baja, 1997-2018 Forester, 1992-2003 Impreza, 2004-2021 Impreza (non STI), 1989-2014 Legacy, 2000-2013 Outback, 2004-2006 Saab 9-2X. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Vehicle Hub is 56.1mm.
  • 2) Wheel studs are M12x1.25 12×1.25mm threads.
  • 3) You have 1.0″ (25mm) of space between your fender and your wheel/tire.
  • 4) Your factory wheel studs are shorter than 1.0″ (25mm) (If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 5) Wheel center bore needs to be no smaller than 56.1mm..
  • [SPECIFICATIONS] Two (2) Wheel Adapter Spacers | Thickness: 1.0″ (25mm) Wide | Vehicle Bolt Pattern: 5/100 | Wheel Bolt Pattern: 5×114.3 (5×4.5″) | Hub Bore: 56.1mm | Stud/Nut Thread Size: 12×1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent....
Check Stock

StanceMagic - 1 inch (25mm) Hubcentric Wheel Adapters Spacers with Lip Converts 5x100 to 5x114.3 (Changes Bolt Pattern), 56.1mm Bore, 12x1.25 Studs, Compatible with Scion FR-S FRS and Many Subaru 4pcs

  • StanceMagic Hubcentric Wheel Adapter Spacers with Lip. CHANGES BOLT PATTERN. Vehicle must be 5x100 bolt pattern AND wheels must be 5x114.3 or 5x4.5 bolt pattern. Compatible with 2012-2016 Scion FR-S FRS, 2016-2021 Toyota 86. Compatible with Subaru 2012-2021 BRZ, 2002-2007 Baja, 1997-2018 Forester, 1992-2003 Impreza, 2004-2021 Impreza (non STI), 1989-2014 Legacy, 2000-2013 Outback, 2004-2006 Saab 9-2X. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Vehicle Hub is 56.1mm.
  • 2) Wheel studs are M12x1.25 12x1.25mm threads.
  • 3) You have 1.0" (25mm) of space between your fender and your wheel/tire.
  • 4) Your factory wheel studs are shorter than 1.0" (25mm) (If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 5) Wheel center bore needs to be no smaller than 56.1mm..
  • [SPECIFICATIONS] Four (4) Wheel Adapter Spacers | Thickness: 1.0" (25mm) Wide | Vehicle Bolt Pattern: 5/100 | Wheel Bolt Pattern: 5x114.3 (5x4.5") | Hub Bore: 56.1mm | Stud/Nut Thread Size: 12x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corro....
Check Stock

KIE Front Hub Installer Puller Tool, Axle & Front Wheel Hub Puller, Universal Tools Front Wheel Drive Cars - Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler

  • The axle & front wheel hub puller makes for easy brake and bearing maintenance..
  • The front hub installer puller tool, compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs..
  • The front wheel hub puller,yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applications..
  • Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles..
  • Heated pressure screw holds up to tough use. Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that resists rust and corrosion..
Check Stock

RockTrix - 1.5 inch Hubcentric Wheel Spacers No Lip (5x115, 71.5mm bore, 14x1.5 Studs) Compatible with 05-21 Chrysler 300, Dodge 09-21 Challenger, 06-21 Charger, 04-09 Magnum - Silver 38mm 5x4.53 2pcs

  • RockTrix Hubcentric Wheel Spacers without a Lip for 5/115 (5/4.53") Bolt Pattern Vehicles and 5/115 (5/4.53") Wheels. Buyers also need to verify: 1) Vehicle Hub Centerbore is 71.5mm.
  • 2) Wheel studs are M14x1.5 14x1.5mm threads.
  • 3) You have 1.5" (38mm) of space between your fender and your wheel/tire.
  • 4) Your factory wheel studs are shorter than 1.5" (38mm). NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit..
  • [FITMENT] Compatible with 2005-2021 Chrysler 300. Compatible with Dodge 2009-2021 Challenger, 2006-2021 Charger, 2004-2009 Magnum. May fit other vehicles, verify with spacer specifications..
  • [SPECIFICATIONS] Two (2) Wheel Spacers | Thickness: 1.5" (38mm) Wide | Bolt Pattern: 5x115 (5x4.53") | Hub Center Bore: 71.5mm | Stud/Nut Thread Pitch: 14x1.5 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs. Precise machined stud/nut threads prevents cross threading..
  • [PRODUCT BENEFITS] Hubcentric Spacer Bore fits perfectly around 71.5mm vehicle hubs to prevent wobble or vibrations, thereby eliminating the need to purchase hubcentric ....
Check Stock

Front Hub Installer Puller Tool, Axle & Front Wheel Hub Puller, Universal Tools Front Wheel Drive Cars - Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler

  • The axle & front wheel hub puller makes for easy brake and bearing maintenance..
  • The front hub installer puller tool, compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs..
  • The front wheel hub puller,yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applications..
  • Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles..
  • Heated pressure screw holds up to tough use. Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that is drop forged for maximum strength and longevity that resists rust and corrosion..
Check Stock

HICKS 2.0\ 4/110 Wheel Spacers for TRX250 Recon TRX 250EX ATC70 Can-Am 4x110,2pc

  • HICKS Offroad ATV Wheel Spacers - Fits machines with 4/110 Bolt Pattern, a hub lip (center bore) not larger than 74.1mm, and M10x1.25 10x1.25mm wheel studs. Works with various ATV, UTV, Side by Side, Quads..
  • Your wheel studs MUST be 10x1.25 for these to fit. Compatible with select Bombardier Suzuki Yamaha: Traxter 500 4WD, Quest 500 4WD, Big Red 250, Recon 250, FourTrax 300 350, FourTrax Foreman 350, Rancher 350 400 4WD, Foreman, Rancher 420 4WD, Foreman Rubicon 500 4WD, Rincon 650 680, Eiger 400, Ozark 250, King Quad, Vinson 500, Vinson 500, Timberwolf 250, Bear Tracker 250, Big Bear, Bruin, Wolverine 350 450, Grizzly, Kodiak, Rhino..
  • Package: Set of Two (2) wheel spacers | Thickness: 2.0" (50mm) Wide | Bolt Pattern: 4x110 | Hub Center Bore: 74.1mm | Stud/Nut Thread Pitch: 10x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs..
  • INSTALLATION:Requires standard tire repair tools, a torque wrench, and lug socket. While installation is simple and most knowledgeable buyers can install themselves, we always recommend professional installation especially if it is....
Check Stock

ECCPP 4pcs 6x135 hub centric Wheel Spacer 1.25" 6x135mm to 6x135mm 87mm Full Hub Centric Spacers 6 lug 14x2.0 Fits for Raptor Expedition for Lincoln Navigator for Lincoln Mark LT

  • 【FITMENT】Please ensure that the installation torque range does not exceed 95 ft/lbs.
  • PLEASE NOTE : NOT FOR 2015 AND UP F150's The hub centric WHEEL SPACER 6x135mm fit for 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 for Ford Expedition,2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 for 150 (ALl Models),2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 for Lincoln Navigator,2008 2009 2010 2011 2012 2013 2014 for Lincoln Mark LT.
  • 【PARAMETER】The 6 lug wheel spacers hubcentric with Thickness:1.25" or 32mm.
  • 【SAFETY】The 6X135 SPACERS hub centirc are made from the best true T-6 billet aluminum,to ensure the highest level of performance and durability for your vehicles.The studs of our Wheel spacers are grade 10.9,heat treated.
  • 【ADVANTAGE】The 6 lug hub centric Wheel Spacers widen your vehicle wheels base by allowing for a more aggressive stance,eliminate rubbing easily and instantly,greatly improve the vehicle stability.
Check Stock

2pcs 1 inch Hubcentric 5x115 Wheel Spacers (70.3mm bore, 12x1.5 Studs) Compatible with Buick Cadillac CTS DTS Deville Chevy Chevrolet Impala Malibu Monte Carlo Pontiac Grand Am Grand Prix (5x4.53)

  • StanceMagic Hubcentric Wheel Spacers with Lip for vehicles with 5/115 (5/4.53") Bolt Pattern and 70.3mm Centerbore. Compatible with Buick Cascada, Century, LaCrosse, LeSabre, Lucerne, Regal, Riviera. Compatible with Cadillac ATS, CTS, DeVille, Eldorado, ELR, Seville. Compatible with Chevrolet Impala, Malibu, Monte Carlo, Orlando, Venture. Also compatible with Pontiac Grand Am, Grand Prix. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are M12x1.5 12x1.5mm threads.
  • 2) You have 1.0" (25mm) of space between your fender and your wheel/tire.
  • 3) Your factory wheel studs are shorter than 1.0" (25mm) (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 4) Wheel center bore needs to be no smaller than 70.3mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers | Thickness: 1.0" (25mm) Wide | Bolt Pattern: 5x115 (5x4.53") | Hub Bore: 70.3mm | Lip Diameter: 70.3mm | Stud/Nut Thread Pitch: 12x1.5 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Inclu....
Check Stock

4 pcs 2" 50mm Wheel Spacers 5x5.5 to 6x5.5 Compatible with 2011 2012 2013 2014 2015 2016 Ram 1500 Wheel Adapters Silver

  • ¡¾WHEEL SPACERS 5x5.5 HUB CENTRIC Compatible with¡¿Repalcement for 2004-2010 Dodge Dakota 1971-1996 Ford Bronco,Repalcement for 1973-1983 Jeep CJ5 1976-1986 Jeep CJ7 2011-2016 Ram 1500.
  • ¡¾2 Inch WHEEL SPACERS PARAMETER¡¿Thickness: 2" or 20mm.
  • Vehicle Bolt Pattern: 5x5.5 inch or 5x139.7mm.
  • Wheel Bolt Pattern: 6x5.5 inch or 6x139.7mm.
  • ¡¾SPACERS ADVANTAGE¡¿Designed to move the wheel further out from the hub, increase cornering stability, and allow Repalcement for a more impressive stance.
  • pressed studs eliminate the risk of vibrations.
  • ¡¾PACKAGING INCLUDE¡¿4 pcs Wheel Spacers.
  • ¡¾NOTE¡¿Please check your vehicle compatibility in Product Description BEFORE buying, feel free to contact us if you need help..
Check Stock

25mm (1 inch) Hubcentric 5x114.3 Wheel Spacers (64.1mm bore, 12x1.5 Studs) Compatible with Acura Honda ILX RL RSX TLX TSX Integra Type R TL Accord Civic Element S2000 CRZ CR-Z - Black 2pcs

  • StanceMagic Hubcentric Wheel Spacers with Lip for vehicles with 5/114.3 (5/4.5") Bolt Pattern and 64.1mm Centerbore. Compatible with Acura CL, ILX, Integra Type R, NSX (Rear), RDX, RL, RSX, TL, TLX, TSX, MDX. Compatible with Honda 1998-2002 Accord (V6 Engine, 5-Lug), 2003-2021 Accord, 2006-2014 Civic, 2015-2021 Civic (Non Type R), CR-V, CR-Z, Element, HR-V, Odyssey, Pilot, Prelude, S2000 (Rear). Check Year/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are M12x1.5 12x1.5mm threads.
  • 2) You have 1.0" (25mm) of space between your fender and your wheel/tire.
  • 3) Your factory wheel studs are shorter than 1.0" (25mm) (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 4) Wheel center bore needs to be no smaller than 64.1mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers | Thickness: 1.0" (25mm) Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Bore: 64.1mm | Lip Diameter: 64.1mm | Stud/Nut Thread Pitch: 12x1.5 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rus....
Check Stock

HICKS 2.0\ ATV Wheel Spacers (4x110, 74mm Bore, 10x1.25 Studs Nuts) Compatible with Various Honda Yamaha Suzuki Bombardier UTV V1 50mm Black 4pcs

  • Your wheel studs MUST be 10x1.25 for these to fit. Compatible with select Bombardier Honda Suzuki Yamaha: Traxter 500 4WD, Quest 500 4WD, Big Red 250, Recon 250, FourTrax 300 350, FourTrax Foreman 350, Rancher 350 400 4WD, Foreman, Rancher 420 4WD, Foreman Rubicon 500 4WD, Rincon 650 680, Eiger 400, Ozark 250, King Quad, Vinson 500, Vinson 500, Timberwolf 250, Bear Tracker 250, Big Bear, Bruin, Wolverine 350 450, Grizzly, Kodiak, Rhino..
  • HICKS Offroad ATV Wheel Spacers - Fits machines with 4/110 Bolt Pattern, a hub lip (center bore) not larger than 74.1mm, and M10x1.25 10x1.25mm wheel studs. Works with various ATV, UTV, Side by Side, Quads..
  • Package: Set of Two (2) wheel spacers | Thickness: 2.0" (50mm) Wide | Bolt Pattern: 4x110 | Hub Center Bore: 74.1mm | Stud/Nut Thread Pitch: 10x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs..
  • Solid Quality: Made from 6061-T6 aircraft-grade aluminum billet, with heat-treated and hardened 10.9 grade bolts.Strengthening the connection of bolts and the holes for without vibration.The anodized surface for corrosion res....
Check Stock