Categories

Best Wheel Spanner

BLACK+DECKER Angle Grinder Tool, 4-1/2-Inch, 6 Amp (BDEG400)

  • Metal gear case for durability and longer life.
  • 3 Position side handle provides added comfort and control.
  • Included Components: 4-1/2" Small angle grinder, Metal grinding wheel, Spanner wrench, Wheel Guard.
Check Stock

BOSCH TG502 Tuck-Pointing Guard

  • SPITFIRE PROFACTOR PERFORMANCE: delivers power equivalent to a 13-amp corded grinder and an X-LOCK mount.
  • X-LOCK WHEEL CHANGE: features click-in mounting and grinder lever wheel release for change-out that's up to five times faster.
  • TOOL-FREE DISC SWAP: the wheel mounts properly without the need for a spanner wrench or flange nuts for no losable parts.
  • KICKBACK CONTROL: helps shut off the tool if the wheel gets into a bind situation.
  • DROP CONTROL: helps shut the grinder off after accidentally dropping the tool on the floor.
  • BITURBO BRUSHLESS TECHNOLOGY: featuring a brushless high-performance motor and drive-train system engineered to take full advantage of the additional power generated by CORE18V PROFACTOR batteries (sold separately).
Check Stock

Bosch 2602025171 Handle with Vibration Control For Angle Grinder

  • SLIDE SWITCH - provides convenience for extended-use applications.
  • POWERFUL GRINDER DESIGN - engineered with the X-LOCK mount and 13-amp motor producing up to 9,300 rpm.
  • X-LOCK WHEEL CHANGE – features snap-on mounting and grinder lever wheel release for change-out that's up to five times faster.
  • TOOL-FREE DISC SWAP – the wheel mounts properly without the need for a spanner wrench or flange nuts for no losable parts.
  • EPOXY-COATED FIELD WINDINGS – extend motor lifetime by preventing dust and debris from penetrating the motor windings.
  • SPIRAL BEVEL GEARS – provide smooth transmission of power to grinding applications.
Check Stock

Bosch DBX4543S Diamond Blade Continuous,4-1/2 In.

  • Diamond blades with the X-LOCK mount design – offer a faster, fixed mount and high-quality materials.
  • X-LOCK wheel change – features snap-on mounting and a wheel-release lever on grinder for change-out up to five times faster.
  • Tool-free disc swap – the wheel mounts properly without the need for a spanner wrench or flange nuts for no losable parts.
  • Continuous rim diamond blade – designed for fast, clean cuts in most common ceramic and stone tile materials.
  • Fast cutting – quality diamonds embedded in an optimized pattern to help ensure that the diamonds are effectively engaged in cutting the material.
Check Stock

Bosch GWX13-60 6 In. X-LOCK Angle Grinder with Side Switch

  • NO LOCK-ON PADDLE SWITCH - provides rapid shutdown of the motor after the switch is released.
  • X-LOCK WHEEL CHANGE – features snap-on mounting and grinder lever wheel release for change-out that's up to five times faster.
  • TOOL-FREE DISC SWAP – the wheel mounts properly without the need for a spanner wrench or flange nuts for no losable parts.
  • POWERFUL CORDLESS, CONNECTED GRINDER – engineered with next-gen user control and advanced electronics.
  • EC BRUSHLESS MOTOR – provides greater efficiency that maximizes runtime and productivity.
  • X-BRAKE – helps provide a rapid stop of the wheel when the switch is turned off.
  • DROP CONTROL – helps shut the grinder off after accidentally dropping the tool on the floor.
Check Stock

Bosch DBX543S 5 In. X-LOCK Continuous Rim Diamond Blade

  • Diamond blades with the X-LOCK mount design – offer a faster, fixed mount and high-quality materials.
  • X-LOCK wheel change – features snap-on mounting and a wheel-release lever on grinder for change-out up to five times faster.
  • Tool-free disc swap – the wheel mounts properly without the need for a spanner wrench or flange nuts for no losable parts.
  • Continuous rim diamond blade – designed for fast, clean cuts in most common ceramic and stone tile materials.
  • Fast cutting – quality diamonds embedded in an optimized pattern to help ensure that the diamonds are effectively engaged in cutting the material.
Check Stock

Bosch DBX4541E 4-1/2 In. X-LOCK Xtreme Segmented Diamond Blade

  • Diamond blades with the X-LOCK mount design – offer a faster, fixed mount and high-quality materials.
  • X-LOCK wheel change – features snap-on mounting and a wheel-release lever on grinder for change-out up to five times faster.
  • Tool-free disc swap – the wheel mounts properly without the need for a spanner wrench or flange nuts for no losable parts.
  • Segmented rim diamond blade – designed for fast cuts in hard material, including reinforced concrete, brick, and stone.
  • Fast cutting – quality diamonds embedded in an optimized pattern to help ensure that the diamonds are effectively engaged in cutting the material.
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 14mm Hole 2 Module 20 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws and 1 spanner for simplicity and convenient use.Lower contact ratio between gears, higher load capacity..
  • ✅【20 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 2 module gear,20 teeth,90 degrees,14mm Hole Diameter..
  • ✅【Warm Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

BOSCH 1893-6 9 Large Angle Grinder with Rat Tail Handle

  • SLIDE SWITCH - provides convenience for extended-use applications.
  • POWERFUL GRINDER DESIGN – engineered with the X-LOCK mount and a 13-amp motor producing up to 11, 500 rpm.
  • X-LOCK WHEEL CHANGE – features snap-on mounting and grinder lever wheel release for change-out that's up to five times faster.
  • TOOL-FREE DISC SWAP – the wheel mounts properly without the need for a spanner wrench or flange nuts for no losable parts.
  • EPOXY-COATED FIELD WINDINGS – extend motor lifetime by preventing dust and debris from penetrating the motor windings.
  • SPIRAL BEVEL GEARS – provide smooth transmission of power to grinding applications.
  • DIRECTED AIR FLOW – channels air through motor to cool key components.
  • VIBRATION CONTROL AUXILIARY HANDLE– allows for improved user comfort and control.
  • ADJUSTABLE TOOL-FREE GUARD – designed with multiple fixed-adjustment settings to allow the user to position the guard in a variety of working angles.
  • SERVICE MINDER BRUSHES – eliminates guesswork, stopping grinder when preventative maintenance is required.
Check Stock

FIGURESLAB 16Pcs Mix Colorway Fingerboard Tucks with Nuts–34mm Wide & 48Pcs Mix Wheel& 32PCS Nuts &64Pcs Screws & 2PCS Spanner Tool

  • WIDTH ：Each fingerboard truck is 34mm wide and is compatible with most single bearing wheels.
  • As picture shown,All necessary hardware is include 16Pcs Fingerboard Tucks & 48Pcs Mix Wheel& 32PCS Nuts &64Pcs Screws & 2PCS Spanner Tool.
  • 34mm Widen fingerboard spacer trucks that provide quality performance and simplicity all in one. Fits decks measuring between 29 – 35mm wide,Each wheel contains a single metal bearing that enables the wheel to spin fast and ride smooth.
  • spacer trucks are compatible with all types of single and dual bearing fingerboard wheels.
  • Note：Not suitable for children 14 and under.
Check Stock

DEWALT Angle Grinder, One-Touch Guard, 4-1/2 -Inch (DWE4011)

  • 7 amp AC/DC, 12,000 rpm motor of the angle grinder is designed for faster material removal and higher overload protection.
  • One-Touch guard of the metal grinder eliminates the need for a tool to adjust the guard location..
  • Hex wrench replaces spanner wrench of DEWALT angle grinder - hex wrench can be found in most tool boxes.
  • Quick-Change wheel release allows tool-free wheel removal without the need for a wrench.
  • 2-position removable side handle provides increased comfort and control.
  • Slim, ergonomic body design provides increased comfort in extended use applications.
  • 5/8-inch 11 spindle thread accepts a wide range of 4-1/2=inch accessories.
Check Stock

BIKEHAND Bicycle Bike Pedal Wrench Extra Long Handle 350mm - Great Road Mountain Bike Pedal Removal Tool Spanner - 15mm

  • EXTRA LONG: Super long 13.8" handle with comfortable grip feeling. A lot of leverage to remove those pedals which stuck in the crank arm. Please view our VIDEO in the listing to make sure that the turning directions are correct. The left and right pedal's axle threads are different..
  • HEAT TREATED: Heat treated high quality steel constructed for long time using. Professional Bicycle 15mm wrench for installation and removal of pedal without scratching the crank arms..
  • PRECISELY MACHINED: The slots are precisely machined extra heavy duty steel to match the pedal spindles perfectly. There are 2 slots on each side, so that is very helpful to get the bike pedals in the optimal working position..
  • 15mm SPANNER: 15mm spanner is located in the middle of the wrench. Normally you can use the slot to install or remove wheel hub bolts. The wrench weight 13.4 oz..
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a life time warranty ! Made in Taiwan..
Check Stock

BOSCH 4-1/2\ Small Angle Grinder GWS9-45

  • COMPACT POWER: The Bosch GWS9-45 Angle Grinder contains a powerful motor in a lightweight, compact tool. At only 4 lbs, the GWS9-45 has a motor that provides 8.5 amps and 11,000 rpm..
  • DURABLE: The GWS9-45 includes durable carbon brushes for extended tool life. The Service Minder brushes also stop the grinder when preventative maintenance is needed..
  • EFFICIENT: The GWS9-45 provides direct-motor cooling for better workload and a quick-change toolless disc change and a large spindle lock. The side handle conveniently adjust to two positions.
  • PROTECTION: Directed air flow diverts dust from vital components of the grinder while the burst-protection adjustable guard provides user protection and safety..
  • Quick-change toolless disc change and a large spindle lock.
  • Included Components: (1) 4-1/2-Inch Grinder (1) Auxiliary Handle (1) Wheel Guard (1) Flange Kit (1) Spanner Wrench (1) Abrasive Wheel.
Check Stock