Categories

Best White Square Vent

Heavy Duty Square Metal Roof Vent (38 Sq. in. NFA) (Galvanized)

  • SPECIFICATIONS: This square top pan style roof vent measures 11" at the hood and 16 1/2" at the base. It has a NFA of 38 Sq. In. and comes with a 1/8" insect screen built-in..
  • ADAPTABLE: This popular style roof vent is compatible with most pitched roof applications.
  • DURABLE: This vent is constructed using heavy duty 28-gauge steel and is made in the USA.
  • MULTIPLE COLORS: This vent is available in either galvanized steel or pre-painted black or brown.
Check Stock

Relaxing Dog Music - Alpha Binaural Beats Soothing Hum Extractor Hood Sound No High Frequencies Above 16 kHz

  • 【High Quality Air Vent Grille】This Air Vent Duct Grill is made of 304 stainless steel material, durable, anti-rust and corrosion resistant,....
  • 【Super Performance】The vent of the deflection dryer is easy to install and open easily to get the maximum exhaust flow. Prevent unpleasant odors,....
  • 【Features】The stainless steel square wall vent with anti-draft gravity flaps, screw fixings, retainer clips and seal..
  • 【Wide Applications】Perfect for using in tumble dryer vent pipes and hoses, bathroom vents and extractors, air con units, kitchen fans and vents,....
  • 【Service Guarantee】 If you have any questions about the Air Vent Grille, or you encounter problems with your use, you can contact us directly. We....
Check Stock

Simply Ming Stovetop Oven Cookbook

  • REPLACe YOUR OLD RV STOVE VENT FLAP: The Dumble RV Supplies Camper Range Hood Vent Cover in White is an injection-molded styrene plastic RV vent range horizontal exterior wall vent that can be used with forced ventilation on large outlet static exhaust range hoods in your RV, camper, travel trailer, or mobile home kitchen.
  • PERFECT SIZE: Requires 10.3-inch x 3.5-inch (26.2x8.9 cm) opening and 1.7-inch (4.3 cm) inlet flange collar length (depth that goes through wall).
  • 11.6-inch x 5.3-inch x 2.1-inch (29.5x13.5x5.3 cm) overall outside dimensions.
  • 10 total screw holes - top and bottom holes 3.75 inches (9.5 cm) apart (measurement center to center).
  • Ensure that the overall size of the vent and its flanges are correct.
  • INSTALL IN MINUTES: Remove your hood (4 screws that go up through hood into cabinet underside), draw outline of this RV range hood exhaust vent insert on interior wall where hood meets wall, drill holes through wall at the corners of the outline, saw outline from interior, tuck installation into wall, saw outline from exterior, caulk/tape (not included) vent frame, press vent into opening, secure vent with the included screws, reinstall hood.
  • KEEP OUT THE BUGS & ELEMENTS: Features an RV hood damp....
Check Stock

Red Hound Auto 2 Bumper Plug End Caps Square 4 Inches Vented Cover RV Camper Trailer Hard Plastic Pair Set

  • 2 Premium RV Trailer Bumper Plug Hard Plastic End Caps.
  • RV/Trailer Bumper Plug End Cap (exact measurement of insert 3-7/8", check inner measurement of your bumper).
  • Fits standard square 4" RV bumpers, conceals sewer hose.
  • Easy, perfect fit with trouble-free installation.
  • Made from heavy duty automotive grade hard plastic.
Check Stock

JSP Manufacturing Universal White Fuel Gas Can Jug Vent Cap Replacements Compatible with Chilton Briggs Rotopax 5

  • New JSP Brand Aftermarket Universal Fuel Can Large White Vent Cap.
  • NEW and IMPROVED with retaining lip to hold the vent in place after installation ~ Vent Caps are installed onto any non-vented plastic fuel cans ~....
  • Quantity: 5 gas can vent caps ~ Color: White ~ Made in USA!.
  • Fits both Plastic and Metal Fuel Jugs ~ You will have to drill a 31/64" (one size below 1/2") hole into the can, then push the vent into the hole..
  • Fits Plastic and Metal Fuel Jugs such as Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Sears Craftsman,....
Check Stock

Lambro 4004 Quick Connect Vent Kit, 4\ X 8'

  • DRYER VENT - White plastic louvered vent with 6" opening..
  • KEEP ELEMENTS OUT - Opening/closing flaps prevent outside elements from entering the vent..
  • UV INHIBITOR - UV inhibitor is used to help prevent the premature fading of vent..
  • DIMENSIONS - Vent Cover: 8.68" x 8.68" x 1.82". Vent Opening: 5.98"..
  • EASY INSTALLATION - Secure outside wall with four screws (not included)..
Check Stock

Ventline V0203-03 White 5 x 24 Metal Refrigerator Roof Vent Cap

  • Ventline Metal Refrigerator Roof Vent Cap.
  • Fits vent base of cutout 5 Inch x 24 Inch, White prefinished metal, streamlined design cover.
  • Vent Cap, overall size 11.5 Inch x 24.75 Inch x 3 Inch White.
Check Stock

Bluegrass Living Vent Free Natural Gas Fireplace System 26,000 BTU, B300RTN-2-AW

  • This Bluegrass Living Vent-Free Fireplace is simply a beautiful and versatile piece of quality furniture. This Fireplace can live in an antique, modern, bohemian, industrial, minimal, or any other types of homes..
  • The fireplace has been carefully designed and created in an antique white furniture grade finish that accents its quality and excellence..
  • Includes many features like a remote control, Oxygen Depletion Sensor with automatic shut-off, battery assisted piezo ignition, and much more..
  • Using Natural Gas only, the Bluegrass Living Ventless Natural Gas Fireplace radiates 26,000 BTU of heat, enough to heat 1,350 square feet of space..
Check Stock

UHINOOS 7.5ft Patio Umbrella Outdoor Table Market Umbrella with Push Button Tilt/Crank,6 Ribs

  • 7.5 feet diameter shades your 24" to 36" round, square or rectangle table with 2-4 chairs, apply to the yard, beach, square and other places..
  • HEAVY-DUTY FRAME: Solid 6-rib steel frame with 1.57 inch diameter heavy duty iron pole supports the 7.5ft canopy, provides superior strength support..
  • COLORFUL: 100% POLYESTER, Made of breathable, light filtering fabric with vent, waterproof, 98% UV protection..
  • EASY TO USE: The crank system makes it easy to raise and lower the outdoor patio umbrella. The push button tilt design also makes tilting umbrellas effortless, providing greater shadow angles..
  • AIR VENT: The air flows freely through the open space at the top of the table umbrella ,creating a cool crosswind, bringing coolness to the summer..
Check Stock

Dumble Replacement RV Bumper Cap, RV Sewer Cap, Travel Trailer Bumper End Caps, Square 4 Inch Camper Bumper Cap, 2-Pack

  • STOW AWAY YOUR SEWAGE HOSE: The Dumble RV Supplies Camper Bumper End Cap 2-Pack is an RV square bumper cap that conceals a sewer hose sewage line that is stored in the RV rear bumper.
  • GET PROPER VENTILATION: 1-inch (2.5 cm) square vent hole in the center of this end cap for RV bumper allows for air circulation to properly ventilate the sewage line while in the RV hose storage bumper compartment.
  • BUILT TO LAST: Constructed from automotive-grade thermoplastic for flexible strength and longevity that resists rust and corrosion.
  • Jet black color to match your existing RV sewer hose storage bumper.
  • INSTALL IN SECONDS: Simply pop the RV camper bumper end caps onto your existing bumper sides to fully conceal the sewage hose while still allowing for ventilation.
  • These 4 in bumper cap plugs are a standard size that fits 4-inch square RV bumpers.
  • If the fit is tight, we recommend using lubrication and a rubber mallet to install.
  • PERFECT SIZE: Fits standard square 4-inch RV bumpers.
  • Requires at least 3.8-inch x 3.8-inch (9.7x9.7 cm) opening and 0.75-inch (1.9 cm) depth that goes into bumper.
  • 4-inch x 4-inch x 1.2-inch (10.2x10.2x3 cm) overall dimensions.
  • Ensure that the overall size of the RV bumper sewer cap is correct.
Check Stock

Hotop 4 Inch Stainless Steel Vent Cover Dryer Outside Air Grille Outdoor Wall Louver Exhaust Fan Square Extractor Outlet with Screen for Tumble

  • Easy Installation: insert the tube into the air vent grille cover, then you only need to mount it on the wall with screws or silicon seal, easy to apply, saving your time and energy.
  • Automatically Open and Close Through Blow: the vent cover can easily open the flaps when pressure is applied from the inside, while it will shut the louvers when the dryer stop pushing hot air through the vents.
  • It helps to keep the draft from coming through the vents during the cold days.
  • Quality Material: the outdoor dryer wall vent is made of aluminum material, which is strong and anti rust, with nice workmanship and quality material to give you nice use experience.
  • Wide of Usage: the outside air vent grille cover is suitable for using in tumble dryer vent pipes and hoses, bathroom vents and extractors, air con units, kitchen fans and vents, electric dryers, cooker hood extractors, conservatory wall outlets and other industrial uses.
  • Grille Screen: the square extractor fan outlet has grille screen to keep rain, snow, wind, birds from entering the outdoor dryer vents, and keep your dryer vent clear of unwanted pests and outdoor elements, providing maximum airflow, which is ideal for the modern home.
Check Stock

EZ-FLO 61615 Three-Way Sidewall/Ceiling Register, 12 inch x 6 inch Opening, White

  • SIDE WALL AND CEILING VENT: Air vent deflector features a grille opening which measures 12 x 6 inches (WxL), and an outer dimension of 13-3/4 inch x 7-3/4 inches (WxL).
  • COMPATIBILITY: Vent covers are designed for use in both sidewall and ceiling locations.
  • DURABLE: Ceiling and sidewall vent is composed of heavy duty steel with a white powder-coated finish which is flake resistant and provides a longer-lasting performance.
  • FUNCTIONALITY: This register vent cover is designed to improve air ventilation in HVAC systems, and features an adjustable damper to easily control air flow.
  • EASY TO INSTALL: Vent cover registers are easy to install, and includes 2 screws for installation.
Check Stock

Hvis Du Farer Vild

  • Heavy Duty Bathroom Fan Light Combo-- 23 Watts GU24 Incandescent lamp and white polymeric grille cover allowing bright light thought to help brighten your living environment..
  • High Performance Exhaust Fan Bathroom--4.0 sones, 70 CFM ( cubic feet per minute), that’s suitable for 65 square feet bathroom to reduce odors smell..
  • Trusted Quality Bathroom Vent Fan with Light-- ETL and HVI Certified, provides you a quality controlled solution in ventilation system with less energy of 63W, 120V, 60Hz..
  • Installation-- Including polymeric duct connectors(Damper) and ceiling mount parts, the fan kit fits 9 3/4" x 8 7/16" construction with no-cut housing and polymeric grille. Our user manual also with specific installation instructions.PLEASE NOTE that the fan is not including power cord and and LED light. You should prepare two power cords. One is for the fan the other one is for the LED light..
  • Our service--Carry one-year warranty. If you have any issues about the ventilation fan, please feel free to contact us. We provide Technical Support and Service..
Check Stock