Categories

Best Wilton Inch Vise Jaws

SWANLAKE 4.5 Inch Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set

  • These soft jaws for bench vise are made of Thermoplastic polyurethane rubber which is sturdy enough to hold your workpiece firmly in place and protect it from your metal bench vise..
  • Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
  • This 2 pack set with both standard & multi-groove jaw pads 4.5″ will work with a 4 inch to 5 inch bench vise..
  • This vise jaw covers feature groove sizes: 90 Degree angles: 1/16″, 1/8″, 1/4″, 3/4″. 60 Degree angle: 13/32″..
  • These vise jaws are ideal for woodworking, jewelry making, and more delicate type work..
Check Stock

Vise Universal Rotate 360° Work Clamp-on Vise Table Vise 3

  • Data:Net weight 3.7 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • Wide range of applications: V60 vise is ideal for small parts such as home, jewelry, hobbies, model making, electronics, etc., providing clamping for....
  • Flexible use: Rotate the control handle to rotate the vise body to the desired position, and move the rotary control handle to firmly fix the vise....
  • Durable: The jaws are quenched and normalized to increase the hardness and toughness of the jaws and are durable.
  • Non-slip design: The anti-slip texture on the inner side of the jaws increases the clamping force of the jaws, and does not slip.
Check Stock

Yost Vises 34C Combination Vise | 6 Inch Jaw Width Heavy-Duty Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Ductile Iron | Blue

  • COMBINATION VISE: The Yost Vises 34C 6-inch utility combination pipe and bench vise are made from 65,000 PSI Tensile Ductile Iron body parts. It has hardened, replaceable steel pipe jaws as well as hardened steel flat serrated jaws and continuous rolled thread on the main screw. The pipe jaws are set back to allow for the machinist's vise use..
  • TECHNICAL SPECS: Jaw Width 6" (15.24 cm), Jaw Opening 10" (25.4 cm), Throat Depth 7.5" (19.05 cm), Min Pipe Capacity 0.25" (0.635 cm), Max Pipe Capacity 6" (15.24 cm)..
  • SWIVEL BASE: Interlocking swivel base with 360-degree motion and 2 lockdowns..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that ....
Check Stock

Yost Vises LDPV-6 Drill Press Vise | 6 Inch Jaw Width Portable Vise | Blue

  • DRILL PRESS VISE: Yost Vises LDPV-6 6-inch Drill Press Vise is crafted from cast iron. Durably light-weight and portable with texture jaws..
  • TECHNICAL SPECS: Jaw Width 6” (15.24 cm), Jaw Opening 5.75" (14.605 cm), Throat Depth 1" (2.54 cm), Slot Width: 0.6" (1.52 cm), Slot centerline: 7.15" (18.16 cm)..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
  • SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all ins....
Check Stock

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

  • MADE IN USA – The bench vise jaw re-imagined from the ground up and built to a higher standard in the USA. New design innovations unique to Frictionworks non-marring soft jaws and a limited lifetime warranty..
  • SUPERIOR HOLD – 8 N48 spec Neodymium rare earth magnets force rated at 7 lbs each. We have tried other vice jaws and by far the strongest magnetic vise jaw pull force is with Frictionworks vise soft jaws. The only vice jaw covers with listed specs and the magnet strength you need to keep the protective jaws solidly on your table vise, jaw horse, drill press vise, swivel vise, vise clamps, or heavy duty bench vise..
  • EXCLUSIVE MAGNET RETENTION SYSTEM – The innovative internal bracket system in our soft jaws secures the magnets to the vise jaw caps with a stainless bolt and is then overmolded into the vice jaw pads, solving the biggest failure point of all soft jaw pads for metal vises leading to the toughest vise jaws made..
  • ENHANCED MATERIAL – Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching,....
Check Stock

Kreg KBCBA Bench Clamp Base

  • Data: Maximum open jaws 3 inches, net weight 3 pounds..
  • Widely used: Aluminum vise clamps can be tilted and rotated 360°, and do not need to be punched to install on the edge of a 2.4-inch thick table. It is an ideal choice for some industries, such as jewelry lovers, craftsmen, model making , Electronic products and others..
  • High-grade materials: The vise will not deform even under high pressure, because the vise is made of cast aluminum, the jaws are made of hardened high-carbon steel alloy, and the movable parts are made of precision milled heat-treated chromium plate carbon steel. To provide reliability and corrosion resistance..
  • Anti-skid design: the anti-skid texture on the inside of the jaws increases the clamping force of the jaws without sliding.
  • Rubber covers will protect your product from injury. The overall design of pliers has laid a good foundation for the smooth completion of your work..
  • Gifts: a adapter that can be used as an electric drill bracket and a hexagon wrench..
Check Stock

Yost Vises 445 Combination Vise | 4.5 Inch Jaw Width Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Cast Iron and Steel U Channel Bar

  • COMBINATION VISE: The Yost Vises 445 4.5-inch utility combination pipe and bench vise is made from a 30,000 PSI cast grey iron with steel U channel bar. Equipped with a large anvil work surface. Also has as a replaceable hardened steel serrated top jaws and a large pipe capacity permanent serrated pipe jaw..
  • TECHNICAL SPECS: Jaw Width 4.5" (11.43 cm), Jaw Opening 4" (10.16 cm), Throat Depth 2.625" (6.6675 cm), Min Pipe Capacity .125" (0.3175 cm), Max Pipe Capacity 2" (5.08 cm)..
  • SWIVEL BASE: 360-degree rotatable swivel base with 2 lockdowns..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime te....
Check Stock

Riverruns II Generation Rotary Fly Tying Vise Jaw Balanced Truly Extendable Right&Left Hand Fitting

  • Riverruns II Generation fly tying vise is a true extendable rotary action fly tying vise on the market! Any hook hold by the jaws is able to stay at....
  • Jaws set is truly extendable in both horizontal and vertical dimension to accommodating any large flies needed to work on. All vise are equipped both....
  • The jaws clamming system exerts a force of 10:1 ratio on the hook, a rock solid holding. The Jaws of the vise are easy to open and close. They are....
  • The bobbin cradle is very handy and versatile. It can be used as a parachute tool. Simply turn over the unit on the vise stem and then tighten the....
Check Stock

FRICTIONWORKS Made in USA 4' Professional Grade Soft Jaw Pads/ Covers for Bench Vise. N48 Grade Magnets. SH 60 Medium Firm Multi-Use Non-Scratch Polymer

  • MADE IN USA - The vise jaw redesigned from the ground up and built to a higher standard in the USA. Tight tolerances. Magnets stay in the jaws. Jaws stay on the vise. No slipping, moving, or falling off the vise.
  • HOLDS FIRMLY TO THE VISE: 8 N48 spec rare earth magnets - 7 lbs of force each. The only jaws with listed specs and the magnet strength you need to keep the jaws solidly on the vise.
  • UNIQUE MAGNET RETENTION SYSTEM - Magnets secured with stainless nuts and screws to a proprietary internal bracket overmolded into the jaws, solving what is likely the biggest failure point of all bench vise soft jaws.
  • ENHANCED MATERIAL - Our proprietary reinforced polymer composite, shore hardness 60-D, with textured face Is incredibly tough yet softer and grippier than nylon while maintaining more rigidity and toughness than TPU. For high-torque applications see or SH80 jaws..
  • THICKER WALLS – with our custom polyurethane provide more uniform compression than other materials reducing slippage, vise slop and racking.
  • PROTECTIVE SURFACE – Specially textured surface won't mar, scratch or discolor. Tested on cerakote, chrome, aluminum, wood, plastic, painted surfaces, and more.
  • TIGHT TOLERANCES - true flat surfaces, angles, and dimensions reduces wobble and improves fi....
Check Stock

IRWIN VISE-GRIP Pliers, Long Reach, Long Nose 11-Inch (1773584)

  • IRWIN VISE-GRIP pliers provide superior long-reach design for working in confined areas.
  • Pliers feature machined jaws for maximum gripping strength.
Check Stock

Olympia Tools Multipurpose Vise, 38-644, 5 inches

  • OPEN END VISE: This multipurpose vise features 5-inch wide jaws for a firm grip, a large, built-in anvil & reinforced 4 lug base. Jaw and base rotate 360 degrees..
  • HIGH QUALITY: Durable and long-lasting, this vise features double-lock swivel base and wide jaws for a firm grip on odd-shaped items..
  • MADE TO LAST: Our durable and long-lasting tools help you with home, garage & industrial projects. With professional-grade quality, easily repair & fix issues with our tool cabinet essentials..
  • THE RIGHT TOOL FOR THE JOB: We engineer a range of bolt cutters, clamps, chisels, folding carts, hammers, pliers, saws, screwdrivers, tape measures, utility knives, vises, bolt cutters, saws & wrenches..
  • SUPERIOR INSTRUMENTS: Olympia Tools provides quality & innovative hand & specialty tools, tool accessories & outdoor equipment for construction, woodworking, mechanical maintenance & home repair..
Check Stock

5' Bench Vise Table Top Clamp Press Locking Swivel Base Heavy-Duty for Crafting Painting Sculpting Modeling Electronics Soldering Woodworking and Fishing Tackle

  • Heavy duty vise jaws width - 5 inch, jaws opening - 5 inch.
  • Gear type locking system with double lock down bolts.
  • 360 Degree double locking swivel base allow you to get the angle on your workpiece.
  • Fit for clamping fixing equipment home or industrial.
Check Stock

VEVOR Woodworking Vise, 9 Inch Woodworking Bench Vise Heavy-Duty Cast Iron Wood Working Vise, Quick Release Woodworker's Vise 10' Jaw Opening, Front Screw Vise for Woodworking, Cutting, and Drilling

  • 9 Inch Professional Use: Jaw width: 9"/230 mm. Jaw opening: 10". Throat depth: 4". Weight: 35.0 lbs. Our professional-grade woodworking vise is built to exact specifications for optimal performance. Get ample holding power and increase your cutting accuracy with half the effort..
  • Superior Iron Structure: Our heavy-duty woodworking bench vise is constructed out of cast iron and has polished guide rods designed for rugged use and extended life. The end stop prevents the vise from being opened too far..
  • Convenient Operation: The quick-release mechanism enables you to utilize this woodworker's vise quickly and efficiently. Pull up on the handle and hold.
  • this will cause the vise nut to disengage. Adjust the jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the product..
  • Simplified Installation: This wood working vise comes with pre-drilled holes in the baseplate for quick mounting to your workbench or machine table. The jaws are also pre-bored to enable the installation and attachment of custom non-marring jaw faces to secure workpiece materials..
  • Widely Applied: The woodworking front vise is suitable for home, woodworking studios, teaching equipment, and fixed for process....
Check Stock