Categories

Best Wilwood Brakes

NEW WILWOOD LONG REVERSE SWING MOUNT CLUTCH OR BRAKE PEDAL ASSEMBLY WITH ADJUSTABLE PEDAL PADS, 6 TO 1 RATIO

  • Brand New Wilwood Long Reverse Swing Mount Clutch Pedal or Brake Pedal with Adjustable Pedal Pads (Wilwood Part # 340-13574)..
  • Wilwood's new Reverse Mount Swing Pedal assembly can be used as a clutch pedal with a single outlet master cylinder or as a brake pedal with a tandem master cylinder..
  • It features all aluminum frame and forged aluminum pedal arms with ladder style construction. ..
  • Features: | Can be used: | * As a Clutch Pedal with a single outlet master cylinder | * As a Brake Pedal with a tandem master cylinder that has a horizontal mounting, when used with a Wilwood Part # 250-3677 (not included with this pedal).
  • Lightweight | * All aluminum frame and forged aluminum pedal arms with ladder-style construction | * New waffle style pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance | * Features a 6:1 pedal ratio | * Easy mounting location | * Below you can view and download the instruction booklet for this assembly here..
Check Stock

NEW SOUTHWEST SPEED DISC BRAKE KIT, FRONT, 2" DROP SPINDLES,ROTORS, BLACK WILWOOD CALIPERS, COMPATIBLE WITH 55-57 CHEVY, PERFORMANCE BRAKE KIT, PART# 205-2052

  • Southwest Speed 2" Drop Spindle & 10 1/2" Disc Brake Kit with Wilwood Calipers (Part #205-2052) for Both Front Wheels. Features Powder-Coated Black Wilwood Calipers..
  • These 1-piece rotor and hat kits deliver the cost effective combination of braking power and style of American muscle cars and vintage rods. They are fully compatible with OE master cylinder output. They provide solid brake capacity and complimentary style with wheel, tire, and suspension upgrades on all types of daily drivers, race vehicles, and ultra-styled show machines..
  • Wilwood's D154 1-Piston Calipers are a lightweight, high-strength, extreme-duty alternative to the OE-style cast iron calipers. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE calipers..
  • Kit includes parts for both front wheels: 1.00" Thick x 10.50" o.d. 1-piece rotors/hats 5 x 4.75" Bolt pattern 12mm x 1.5 studs 2" Drop Spindles Strong 4140 steel construction Wilwood D154 1-piston forged aluminum calipers - Black 2.50" pisto....
Check Stock

NEW WILWOOD FULL FRONT DISC BRAKE KIT, 12' DRILLED ROTORS, RED DYNALITE CALIPERS, PADS, 2002-2006 ACURA RSX, 2004-2005 HONDA CIVIC HATCHBACK SI 5 LUG, 2002, 2003, 2004, 2005, 2006

  • Brand New Wilwood Premium Big Brake Forged Dynalite Bolt-On Front Hat and 12.19" Disc Brake Kit (Part # 140-7014-DR) for Both Front Wheels. * Only one side pictured. See the list, the diagram, and the brake kit assembly booklet below for a detail of the auto parts included. * Features Drilled and Slotted Rotors with Powder Coated Red Calipers..
  • Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. * Forged Billet Dynalite Calipers, oversized 12.19" o.d. rotors, and high performance Wilwood brake pads deliver big brake stopping power with high-tech style for front wheel drive sport compacts. These kits are the perfect compliment wheel, tire, and suspension upgrades on all types of vehicles..
  • These Big Brake kits require at least 16" diameter wheels..
  • Brake kit includes parts for both front wheels: | * Drilled and Slotted,.810" Thick x 12.19" O.D. Rotors | * Forged Dynalite Calipers - Red | * Caliper Mounting Brackets | * BP-10 Smart Compound Brake Pads | * Brake Hats | * All Hardware necessary to install the complete braking system on both front wheels | * Complete brake kit weighs approximately 36 lbs. | Below you can v....
Check Stock

NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986

  • New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors and Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # GMC7087X5-K7) 003e Currie Crate Rear Ends are designed to be a bolt-in upgrade.
  • Fits: | Chevrolet Trucks: 003e Will Fit All Late-1970 to 1987 C-10 2wd Trucks with 5-Lug wheels | GMC Trucks: 003e Will Fit All Late-1970 to 1987 C15/C1500 2wd Trucks with 5-Lug wheels.
  • Includes: | Currie 9-Plus Centurian Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMC7087X5) 003e 31 Spline performance axle package 003e Housing includes all 3rd member studs installed 003e GMT7087X5 GMC7072X5 GMC7387X5 003e Built to the stock overall width (63 5/8") and pinion offset specs 003e 63 5/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
  • Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part # 140-11389-DR): | Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile 4 Piston Dynapro Calipers - Red 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Br....
Check Stock

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
  • Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
  • *Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....
Check Stock

NEW SUSPENSION & WILWOOD BRAKE SET WITH CURRIE REAR END & AXLES, POSI-TRAC, 11\ DRILLED DISCS, RED CALIPERS, MASTER CYLINDER BOOSTER ARMS 1968 1969 1970 1971 1972 CHEVY CHEVELLE EL CAMINO CUTLASS GTO

  • Brand New Suspension and Brake Kit for 1968-1972 GM A-Body Cars (Part # GMA6872X-K34) | This specific set features Wilwood brakes with Drilled/Slotted Rotors and Red Calipers | Fits: Chevrolet 003e 1968-1972 Chevelle, El Camino, and Monte Carlo | Buick: 003e 1968-1972 Skylark, Gran Sport (GS), Station Wagon, and Sportwagon | GMC: 003e 1970-1972 Sprint | Oldsmobile: 003e 1968-1972 Cutlass, 4-4-2, Station Wagon, and Vista Cruiser | Pontiac: 003e 1968-1972 GTO, Grand Prix, Lemans, Station Wagon, and Tempest.
  • For 1967 year model cars: | This rear end can be used in some of the 1967's 003e On 1967's, you must examine the original rear end in the car to determine whether it has: 003e Early Style Spring Pad - A flat coil spring pad with a bolt and a plate that retain the spring, or 003e Late Style Spring Pad - A stamped dome style pad that the spring sits atop unretained 003e The 2 styles of pads cannot be interchanged - the pinion angle would be adversly affected.
Check Stock

Performance Friction 7751.13.20.44 Brake Pads Wilwood Sl

  • PERFORMANCE FRICTION 13 AP/Outlaw/Wilwood SL Brake Pads 4 pc P/N 7751-13-20-44.
Check Stock

Polaris New OEM 2015-2017 Slingshot Brake Pad Kit, 2205613

  • Genuine Wilwood part that fits your specific vehicle.
  • Manufactured to meet specifications for fit, form, and function.
Check Stock

Polaris ATV Heavy Duty Brake Pad, Part 2208934

  • Genuine Wilwood part that fits your specific vehicle.
  • Manufactured to meet specifications for fit, form, and function.
Check Stock

1955-57 Fits Chevy 2" Drop Spindles, Aftermarket Disc Brake Conversion Kit

  • Ideal for use with Wilwood or other aftermarket brake kits applicable to Heidt's Tri-5 drop spindle application.
  • 2" drop design to lower the front of you car and achieve the stance you are after.
  • Cannot be used with stock drums or brake conversion for stock type spindle.
  • Ball joints mount through the top, on both top & bottom ball joint mount bosses.
Check Stock

R1 Concepts Front Rear Brake Rotor Kit |Brake Rotors| Brake Disc |Drilled and Slotted|fits 2018-2022 Genesis G70; Kia Stinger

  • Wilwood's engineering department uses the latest computer-aided design and manufacturing techniques in conjunction with finite element analysis, dynamic test and cycle test equipment, to find high-performance and reliability solutions for the most difficult braking tasks..
Check Stock

Motive Products - 0103 Brake System Power Bleeder for Chrysler/Dodge/Mopar

  • Motive Products Power Bleeder kits use pressurized brake fluid to force air and old fluid out of your brake lines.
  • Just pour clean fluid into the pressure tank, attach the Power Bleeder cap to your fluid reservoir, and pressurize the system using the built-in hand....
  • Features custom cap to fit most late model Chrysler and Dodge cars and trucks..
  • Also fits some after market reservoirs and master cylinders made by Strange Engineering and Wilwood that use two twist on caps..
  • Built-in heavy duty hand pump (no other pressure source is needed) and precision pressure gauge ensures safe and effective operation..
Check Stock

BELL Binder 100 Caliper Brake Pads

  • Side stop caliper brake pads, pads for standard side pull And center pull brakes, raised ribs for all weather stopping.
  • Ideal for comfort or cruiser bikes with Caliper brakes.
  • Pads for standard side pull and center pull brakes.Raised ribs for all weather stopping.Great value.
  • Pads for standard side pull and center pull brakes.
Check Stock