Categories

Best Winch Mounting Plates

Hooke Road F150 Offroad Steel Front Bumper w/Winch Plate Compatible with Ford F-150 2004 2005 2006 2007 2008 Pickup Truck

  • 3-piece design full-width front bumper for Ford F150 2004 2005 2006 2007 2008. Not Compatible with Factory Sensors. Easy bolt-on installation. No drilling required..
  • Rugged off-road look. Fully-welded D-Ring mounts with 4.75-ton capacity. Built-in winch plate rated up to 12000 lbs..
  • Bumper weight about 145 lbs. Heavy-duty 11-gauge(1/8 Inch) steel for the bumper main body, 8-gauge(11/64 Inch) for the structural connection plates and winch plate..
  • Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 2 packages. Included Front bumper assembly.
Check Stock

BUNKER INDUST Receiver Hitch Winch Cradle Mount Plate, Universal 2\ Trailer Hitch Winch Mounting Bracket for ATV UTV Truck

  • UNIVERSAL WINCH MOUNT PLATE---Winch mount bracketprovides a solid mounting place for your winch,allowing you to attach a winch to your ATV, UTV or truck.And pre-drilled winch mount fits most winches,installed according to your need.This winch plate is suitable for winches rated between 1,300 to 16,500 lbs.
  • STANDARD FIT---This receiver hitch winch mount plate is equipped with a standard 2-inch shank and has three mounting holes for an adjustable design, which fit any industry-standard 2-inch x 2-inch trailer hitch receiver (hitch pin not include)..
  • DURABLE CONSTRUCTION---Features a durable black powder coating, even put it outdoor or wet by rain for a long time, our winch mounting plate can be guaranteed not to rust easily and keep the original state.
  • PROTECT YOUR WINCH---This winch mounting plate is made of heavy duty steel, durable construction insures its long lifespan. It can hold the weight and serve as a shield, guarding your winch against rock damage and debris while you are blazing an off-road trail.
  • FRONT OR REAR MOUNTED---This trailer hitch accessory can be mounted on the front or rear of the vehicle, wherever a standard 2-inch receiver is properly installed.
Check Stock

VEVOR Truck Winch 13000lbs, Electric Winch Synthetic Rope with Wireless Remote Control and Powerful Motor for UTV, ATV, Jeep Truck and Wrangler in Car Lift

  • ✔️ 【Fits】Most bumpers or winch mounts with a 3.0" x 6.6" (76 x 168mm) mounting bolt pattern. Note: Requires machine-specific mounting plate or winch ready bumper (sold separately) | Instructions can be accessed through QR code on through Manufacturer's website..
  • 【6000 LB Winch】 If you get your UTV or ATV in rough situations, you need a 6000 Lb. Black Ops Winch to handle it. | Permanent Magnet 12V 1.9 Hp Dc Motor | 6000 Lb. rated line pull synthetic 50' rope | 266:1 Gear Ratio | Winch Dimensions (Lxwxh) = 14.56” X 4.41” X 4.86”.
  • 【Kit Includes】6000 lb. Black Ops Winch, 50' synthetic rope, wired dash rocker switch, fairlead support bracket, winch hook kit, automatic brakes, hook pull strap, rope stopper, aluminum hawse fairlead- 6.0" ( 152.4 mm), heavy-gauge extended wiring and water proof solenoid (long enough for four-seaters), and all hardware for ease of installation! | Automatic shut off.
Check Stock

SuperATV 4500 lb Winch for UTV/ATV | Complete Black Ops Winch Kit | Waterproof Seals and Solenoid | 1.3 HP Motor | 166:1 Gear Ratio

  • 【 Fits】Fits most bumpers or winch mounts with a 3.0" x 6.6" (76 x 168mm) mounting bolt pattern | Please Note : Requires machine-specific mounting plate or winch ready bumper (sold separately).
  • 【4500 LB Winch】Our SuperATV Winch is ready to make sure you're not stranded on the trail! | Powerful permanent magnet DC 12V 1.3 HP motor | 4500 lb. rated line pull synthetic 50' rope | 166:1 gear ratio | Winch dimensions (LxWxH): 14.49" x 4.60” x 4.37" | Automatic braking applied to the drum when motor is stopped or a load is attached.
  • 【Kit Includes】4500 lb. Black Ops Winch, 50' synthetic rope, wired dash rocker switch, aluminum hawse fairlead-6.0" (152.4 mm), fairlead support bracket, winch hook kit, hook pull strap, rope stopper, heavy-gauge extended wiring and waterproof solenoid (long enough for four-seaters).
  • 【Synthetic Rope vs. Steel Cable】Synthetic rope is flexible and it won’t shred your hands from frayed steel wire. It also won’t kink or rust—synthetic ropes are built for the mud and muck you find on the trail where steel cable is no....
Check Stock

SuperATV Black Ops 6000 lb Winch with Winch Mounting Plate for 2020+ Polaris RZR PRO XP/RZR PRO XP 4 | Complete RZR Winch Kit Ready to Install!

  • 【 Fits】2020+ Polaris RZR PRO XP / RZR PRO XP 4 | Please Note: Not compatible with Polaris front high coverage bumper, part # 2883749 / not compatible with winches using a 76mm x 124mm (3" x 4 7/8") mounting bolt pattern..
  • 【Complete, Bolt-On Ready Winch Kit】Ready to make sure you are not stranded on the trail? This kit is exactly what you need. It includes our Black Ops 6000 lb winch and a winch mounting kit specifically made to fit perfectly on your Polaris RZR. A strong mount is just as important as a strong winch—don’t get caught with a mount that can’t take the weight of your machine..
  • 【6000 lb SuperATV Winch】100% waterproof Polaris RZR winch | Powerful permanent magnet 12V 1.9 Hp Dc Motor | 6000 lb. rated line pull synthetic 50' rope | 266:1 Gear ratio | Winch dimensions (Lxwxh) = 14.56” X 4.41” X 4.86” | Mounting holes: 76mm x 169mm (3" x 6 5/8") | Fairlead bolt pattern: 152mm (5.98").
  • 【Machine Specific Mounting Plate】Mount made specifically to fit your PRO XP | Made with 3/16” steel plating | UV-r....
Check Stock

SuperATV Heavy Duty Winch Mounting Plate for 2021+ Polaris RZR Trail 900 / S 900 / S 1000 | 3/16\ Steel Plating | UV-Resistant Powder Coating | Compatible With Many OEM and Aftermarket Winches!

  • ✔️【 Fits】2021+ Polaris RZR Trail 900 / Trail S 900 / Trail S 1000 | Designed to work with SuperATV’s Black Ops Winches | Please Note: This Polaris Winch Mount has dual mounting bolt patterns for the majority of aftermarket 3500–6000 lb. winches..
  • 【Machine Specific Mounting Plate】Made with 3/16” heavy-duty steel plating | UV-Resistant wrinkle black powder coating prevents corrosion | Mounting Holes: 3” x 6 5/8” (76mm x 169mm) 3” x 4 7/8” (76mm x 124mm) | Fairlead Bolt Pattern: 5.98” (152mm) 4.29” (109mm) | Strength you can count on!.
  • 【Strong and Dependable】Do you need the best Polaris RZR Winch Mount in the industry? SuperATV's is laser cut, brake press bent, and powder coated to ensure years of use. And it’s not just ultra strong—it’s also super simple to install. We include everything you need to have it on your machine in no time..
  • 【Winch Out With Ease】Both at work and at play, you don’t hold back on your Polaris RZR Trail! SuperATV’s RZR Winch Plate ....
Check Stock

SuperATV 6000 LB Black Ops Winch with Winch Mounting Plate for 2016+ Honda Pioneer 1000/1000-5 / Deluxe | 2017+ Pioneer 1000 Limited Edition / 1000-5 Limited Edition | 3/16' Steel Plating!

  • ✔️【 Fits】2016+ Honda Pioneer 1000 / Pioneer 1000-5 / 1000 Deluxe / Pioneer 1000-5 Deluxe | 2017+ Pioneer 1000 Limited Edition / 1000-5 Limited Edition | Compatible with many OEM and aftermarket winches | Mounting Holes: 3” x 6 5/8” (76mm x 169mm) | Fairlead Bolt Pattern: 5.98” (152mm).
  • 【 The Strength You Need】Your monster Honda Pioneer 1000 spends a ton of time on the trail, and your favorite pastime is rescuing lesser riders from the mud hole. But if you don’t have a winch mount built to take the force, you won’t be rescuing anybody! If you want to be serious on the trails, you need a serious Honda Pioneer Winch and Winch Mount! Our strength is one of the best in the industry!.
  • 【6000LB SuperATV Winch】100% Waterproof Winch | Powerful Permanent Magnet 12V 1.9 HP DC Motor | 6000 Lb. Rated Line Pull Synthetic 50' Rope | 266:1 Gear Ratio | Winch Dimensions (LxWxH) = 14.56” X 4.41” X 4.86”.
  • 【Machine Specific Mounting Plate】Our 6000 LB Winch is made with 3/16” heavy duty steel plating | UV-Resistant wrinkle black powder coating prevents corrosion,.
  • 【Installation】No Drilling Required! Your UTV winch and winch mounting kit comes with all of the hardware you'll need for an easy installation..
Check Stock

Winch Switch for ATV UTV Polaris Sportsman RZR Warn Badlands Arctic Cat Champion KFI Ramsey Master Lock 4 Wheeler 12 Volt Toggle Winch Rocker Thumb Switch Handlebar Control Line Mounting Bracket Kit

  • REPLACEMENT ATV WINCH SWITCH KIT - 12V Winch Rocker Switch with Mounting Bracket for ATV UTV Handlebar winch switch control line kit is compatible....
  • WORKS ON MOST ATV & UTV - All 12 volt ATV and UTV winch switch systems using solenoid operated contactor or relay: 4x4 ATV UTV SUV winches like for....
  • PREMIUM QUALITY - Waterproof and weatherproof electric winch toggle switch is made of solid and weather resistant steel and powder coated black....
  • EASY TO INSTALL - Package includes winch rocker thumb switch control line kit with mounting bracket handlebar. No drilling or modifications needed,....
  • BUY WITH CONFIDENCE - KanSmart provide 1-year warranty for this 12V Winch Rocker Thumb Switch with Mounting Bracket for ATV UTV Handlebar Control Line....
Check Stock

Stark USA Universal Portable Foldable Trailer ATV Hitch Winch Mount/Cradle w/Hitch Receiver 2\ Winch Mount Recovery Winches (10\ x 4-1/2\), Black (25084)

  • Large Carrying Capacity - Perfect for 8000 lb to 13000 lb Winches, solid steel construction with one-piece fully welded design for extra strength.
  • Heavy Duty Steel Construction - Our winch mounting plate is made of heavy duty steel, durable construction insures its long lifespan.
  • Carrying Handle Design for Easy Portability - Includes (2) convenient carrying handles to easily allow you to move your winch on and off your vehicle..
  • Easy Installation - Our portable winch hitch receiver mount allows you to easily mount your winch to any standard 2” x 2” receiver.
  • Package Include - Mounting rack package includes pin and clip, as well as 10" upper center guide bolt pattern and 10" x 4-1/2" standard winch mounting pattern, everyone can easily install this cradle winch.
Check Stock

TYT Winch Mounting Bracket, Heavy Duty Right Angle Mounting Winch Bracket, Heavy Duty Winch Mount Plate for 600lbs to 3500lbs Trailer Winch Mount（Black)

  • ▶Super Design: The winch mount is suitable for 600lbs to 3500lbs hand winches.This winch mounting bracket is constructed of high quality steel.The hand winch mounting plate has a tough spray coating finish for supreme durability and can prevent rust..
  • ▶Great Idea: Winch mounting plate to help your hand winch to mount available on the ground or on the wall, perfect for boat trailer, trucks, ATV..
  • ▶Easy To Install: Just mount this plate on the ground or wall tightly and then mount your winch on another side of this plate..
  • ▶Pay Attention: Please make sure your winch and plate tight and safe no matter where you are going to install..
  • ▶100% Satisfaction Guarantee: We'll refund your money if you are not 100% satisfied with this product, Please feel free to contact us if you have any questions, we will provide a perfect solution for you..
Check Stock

2017 Kawasaki Teryx 4 Teryx 800 Winch Mount 100935

  • ✔️【 Fits】2015+ Kawasaki Mule Pro FXT | 2016+ Kawasaki Mule Pro DX / Kawasaki Mule Pro DXT / Kawasaki Mule Pro FX / Kawasaki Mule Pro FXT Ranch....
  • 【Complete, Bolt-On Ready Winch Kit】Ready to make sure you are not stranded on the trail? This Kawasaki Mule Winch Mounting Plate Kit is exactly....
  • 【6000Lb SuperATV Winch】Our SuperATV Winch is 100% Waterproof Winch | Powerful Permanent Magnet 12V 1.9 Hp Dc Motor | 6000 Lb. Rated Line Pull....
  • 【Machine Specific Mounting Plate】Made with 3/16” Steel Plating | UV-Resistant Wrinkle Black Powder Coating Prevents Corrosion | No drilling....
Check Stock

ZEAK 13000 lb. Premium Electric Winch 12V Waterproof Synthetic Rope, Wireless Remote, for Truck SUV

  • With a 3-stage planetary gear system for strong pulling.
  • The unique design is very suitable for your jeep Wrangler, SUVs, trucks and trailers, making it more attractive and cool.
  • Mounting Bolt Pattern Size: 10 x 4.5 inches.
  • Winch Synthetic Rope Size: 3/8 inch x 86 feet.
  • This powerful winch is equipped with the stronger synthetic rope to quickly get rid of the predicament of vehicle getting stuck in some troubles.
  • No load traction drag speed at 21.3 feet /min, the Full load 13000 lbs drag speed at 5 feet /min.
  • comes with a upgrade version remote control, the remote control buttons are more sensitive, greatly reduced the problem which remote control can not control the rope in and out (Remote range up to 32 feet).
  • 11.8 x 2.7 x 10.03 inches hawse fairlead.
  • 137.4 inches corded remote control and a wirless remote.
  • To install the winch and fairlead, getting a mounting bracket set up which not includes in this product.
  • Please read the instructions carefully before operating ....
Check Stock

SuperATV Winch Mounting Plate for Polaris Ranger Midsize 400/500 / Crew / 570/800 (See Fitment) | Powder-Coating Prevents Corrosion | Compatible with Many OEM and Aftermarket Winches

  • ...2011-2013 Polaris Ranger Midsize 500 | 2012-2013 Polaris Ranger 500 Crew | 2017+ Polaris Ranger Midsize 500 | 2014-2021 Polaris Ranger Midsize 570 | 2014 Polaris Ranger Midsize 570 Crew / 800 | NOTE: 2017+ mounts are only compatible with the 3500lb winch..
  • 【Ride More, Worry Less】SuperATV’s Polaris Ranger Winch Mounting Plate for the Polaris Ranger Midsize provides a secure mounting point for your Black Ops Winch, ensuring a safe and easy escape when you find yourself stuck in the mud. Knowing that you’re prepared for anything lets you ride more and worry less, because isn’t that what off-roading is all about?.
  • 【Powder-Coated Steel Construction】 Made out of 3/16” heavy-duty steel plating. They arrive at your doorstep with all required hardware, making installation a breeze. Your winch mount is laser cut and CNC brake press bent to give you a product that is as tough as you are. With strong gussets and a powder-coat finish, SuperATV’s Ranger Midsize Winch mounts truly are built for battle..
  • 【Installation】 Mounting Holes: 3” x 6 5/8” (76mm x 169mm) / 3” x 4 7/8” (76mm x 124mm) | Fairlead Bolt Pattern: 5.98” (152mm) / 4.29” (109mm) | NOTE: The Polaris Winch Mount has dual mounting bolt patterns for the majority of aftermark....
Check Stock