Categories

Best Winding Pipe Extrusion

Rodeel 24 PCS Fishing Leaders Wire with 49 Strands Tooth Proof Stainless Steel with swivels

  • Package Content:24pcs fishing wire leaders rigs.
  • Length: 25cm/0.82inch,Line Diameter: 1mm/0.04inch,Steel wire Pulling Force:40KG/88.18LB.
  • Material:High-strength stainless steel wire +hot air pipe.
  • Design - 8-ring interface ring solves the winding problem, and use hot air pipe to wrap the snap and swivel, remain stable underwater, fish loading rate is higher.
  • Lamination fishing line- 304 stainless steel 49 stranded wire，very soft and strong. The 49 strand design makes it very durable, and the 304 lamination stainless steel wire used will not rust..
Check Stock

SENKEI Self Fusing Silicone Tape 1\ x 10' Hose Repair Tape Waterproof for Air Hose Plumbing Repair, PVC Pipe Repair Hose Leak Seal Emergency Repairs Wire Insulation

  • ...er heater connectors, sewer elbows and various water pipes leaking or seeping. 2. Car maintenance, handle wrapping, protection, wire connectors, etc..
  • Thick and Waterproof Self Adhesive Rubber Tape for Pipe Repair: Strong plasticity, adapt to various shapes.
  • Close to the pipe after winding, strong winding effect.
  • 0.5mm thickness, thicker, more durable, and better waterproof effect..
  • Durable Rescue Tape : Good UV resistance, insulation, high and low temperature resistance, the temperature resistance is about -50°C to 250°C, and the thermal stability is 180°C. Thus our non adhesive leak proof rubber hose tape have superior aging resistance and can be long-term used..
  • Self-Fusing Silicone Tape And Packaging: This self-adhesive rubber tape has no messy adhesives, only sticks to itself, does not stick to your hands, is easy to install and remove. It has excellent stretching ability and can form permanent bond. Aluminum foil bag packaging, better storage and sealing performance..
  • Simple Operation: When using this tape, you must stretch it, wrap it and overlap it around the leak, and wrap the end on this product. After a few minutes, a self-melting layer will be formed between the tape to wrap and repair the leak..
Check Stock

PLA Filament 1.75mm Geeetech 3D Printer Consumables 1kg Spool 2.2lbs Dimensional Accuracy +/- 0.03mm Fit Most FDM Printer New Silver

  • 【Upgrade Tidy Winding】Always maintain a smooth feeding during printing, no entanglement, effectively reduce unexpected printing interruptions..
  • 【Dimensional Accuracy Consistency】Advanced CCD diameter measuring and self-adaptive control system keeps the diameter accuracy of PLA wire within....
  • 【Easy to Print】Easy to get quality prints with sharp details.Recommended extrusion/nozzle temperature：180°C - 210°C (356°F - 410°F), hot bed....
  • 【Vacuum Packing】Completely dried for 24 hours before packaging and vacuum sealed , smoother and more stable printing. Since the PLA filament is....
  • 【High Quality & Toughness】Geeetech premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high....
Check Stock

PLA 3D Printer Filament 1.75mm SUNLU PLA Filament Dimensional Accuracy +/- 0.02 mm 1 kg Spool PLA 1.75 Black

  • 【1KG(2.2 lbs) Spool】Spool Diameter: 8.00"-Spool Width: 2.50"-Spool Hub Hole Diameter: 2.20". SUNLU Strong Coils Design Help Your 3D Printing More....
  • 【1.75mm PLA Filament】SUNLU PLA 3D Printer Filament 1.75mm, PLA 1.75 Dimensional Accuracy +/- 0.02mm. No Pungent Smell in Printing, No Harm to User....
  • 【Tangle Less & Clog-free & Bubble-Free】Full Mechanical Winding and Strict Manual Examination, Which Guarantee the SUNLU PLA filaments tidy and....
  • 【High Compatibility】SUNLU PLA Filament Works Perfectly with Most FDM 3D Printers on the Market, Such as Ender 3, CR 6, A 8, CR 10, Maker Bot, Mono....
  • 【Recommend Settings】PLA Filament Extrusion/Nozzle Temperature 215-230℃, Bed 70℃-80℃. SUNLU 3D Filament are the Most Common Used Filaments....
Check Stock

Electronic Water Descaler, Reduces Limescale, Prevents Scale Build-up in Pipe, Alternative Water Softener Salt Free for Whole House use

  • ...ent the following situations: pipeline blockage, surface darkening and mechanical failure, high heating cost, high cleaning cost, and corrosion caused by pipeline corrosion..
  • Easy to install. --- You can install the host vertically, horizontally, or at any other angle. The winding can be placed partly on the main pipe and partly on the distributor pipe. All these different installations are possible because the processing pulse extends more than a few meters on both sides of the pipe..
  • Reliable customer service --- If you have any questions after receive Moosec Water Descaler, please contact us to help you at the first time. We are always on standby for 24H/DAY to provide you with a perfect after-sales service..
Check Stock

Iceberg Thermal IceFLOE T65 ITX Low Profile 3 Heat Pipe Extrusion Aluminum Heatsink HTPC CPU Cooler with 80mm Fan

  • Tuned 3 Heat Pipe Extrusion Heatsink, Performs Up To 65W TDP.
  • 4-Pin, 80mm PWM Fan, 1000 - 3000 RPM, 31.5 dBA.
  • Infinite RAM Clearance, Copper Base, and Nickel Plating for Ultimate Performance with Pre-Applied FUZEIce.
  • Socket Compatibility: Intel LGA 1200, 115X, 1366, 775, AM3(+), AM2(+), FM2(+).
Check Stock

PLA 3D Printer Filament, 3D Printer PLA Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, 1KG Spool PLA Black

  • High-quality PLA filament: With quality and consistency in mind, stronger toughness with low shrinkage and better layer adhesion. Meet your needs for functional print projects. (Using tips: Please pass one end of the filament into the fixing hole to avoid being entangled after finishing your printing.).
  • Dimensional Accuracy & Consistency: PLA filament. Self-adaptive control system in the manufacturing guarantee the 1.75 mm diameter, dimensional tolerance: +/- 0.02mm, 1 kg spool (2.2lbs) net weight..
  • Clog-Free & No Bubble: PLA is vacuum sealed with desiccant to protect the filament from moisture to achieve high-precision printing.No clogging and bubble-free..
  • Less-tangle and Easy to Use: Auto-mechanical winding to make sure the wire is neatly arranged.Recommended PLA Filament Extrusion/Nozzle Temperature 180℃ - 215℃.
  • Wide Compatibility: Works and Compatibleperfectly with all common 1.75mm FDM 3D printers..
Check Stock

HQUA 5000E Electronic Water Descaler, Alternative Water Softener, Salt Free, Limescale and Rust Removal and Prevention

  • ... Water Softener. Super cheap and maintenance free. 1 USD per year cost..
  • NOTICES: The Max Pipe Size: 1-1/2”. The Max Water Hardness: 25 gpg (grains per gallon). 8 inches needed at least totally for 1” pipe, 6 inches needed at least totally for 1-1/2” pipe. Separately winding acceptable..
  • 1 YEAR-100% MONEY BACK GUARANTEE. You would get a full, no quibble refund if you are not satisfied with the performance of this product at any time in 1 year after your purchasing..
Check Stock

ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 225 x 225 x 280 mm³ Large Printing Size

  • ...setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation..
  • 【Dual-Gear Direct Extruder】The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS..
  • 【Nozzle Kit for Better Printing Effect】The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging..
  • 【Smarter Printing Experience】Auto mesh bed leveling adopts a non-contact high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axi....
Check Stock

Generic Seal Self Fusing Silicone Tape:0.98 Inch Wide 39 inch Pipe Seal Tape Weatherproof Hose Repair Leak Seal Rubber Tape for Pipe Repair, Pipe Leak

  • -[Pipe Seal Tape] silicone is a to solve water leaks. Pull the tape away from the leak, making sure that half of each turn is wrapped around the previous turn, which will perfectly repair the leak in the water pipe. The soft tape is also suitable for various irregular surfaces..
  • -[Insulation Silicone Tape] The insulating properties of the tape can keep it insulated up to 8000V ,can provide insulation protection of high voltage cable and wire,witch can be in wire winding or wire repair occasions..
  • -[High & Low Temperature Resistance] The Seal Self Fusing Silicone Tape tapes are made of materials. They Can work stably from -76 °F to 500 °F and adapt to outdoor temperature environments..
  • -[Remove without Residue] Non-adhesive silicone tape, the tape itself is not sticky, you just need to wrap it and overlap it, after applying pressure, so that it does not need any messy adhesives that may leave any sticky residues..
  • -[After-sales] We are committed to bringing customers a good shopping experience. If you have any questions about the pipe tape, you can contact our customer service, and we will do our best to solve the problem for you..
Check Stock

Concrete Saw 14 Electric Demo Saw Concrete Cutter 5800W Circular Saw with Blade and Pump Wet Dry Cutting for Concrete Marble Granite Light Bricks Wood 110V

  • 14‘’Adjustable Diamond Saw Blade: This electric concrete saw with a large-size sharp saw blade, maximum cutting depth is 5.3" with segmented axles....
  • Dry/Wet Dust Free Cutting: This circular saw is equipped with a water pump and water pipe fitting. The water pipe is used to supply water to the saw....
  • Flexible Concrete Saw : The flexible concrete cutter is equipped with 2 handles（4.7L”*4.7W）, the front handle can be rotated 180°, and the rear....
  • Built-In Copper Motor: 110v, 5800w motor adopts stacked height increase winding technology, which makes the motor power strong and does not consume....
  • Widely Use: The powerful electric cutting machine is suitable for indoor and outdoor use. It can be used for plumbing and electrical engineering....
Check Stock

PLA Filament 1.75mm, Dovov 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 1kg Spool

  • ...acy & Consistency】30-40 times laser scan per second during production, ensure these PLA filaments of 1.75 mm diameter,Dimensional Accuracy +/- 0.02 mm.1kg spool (2.2lbs).
  • 【High Compatibility】The standard 1.75mm PLA printer filament is suitable for both 3D printers and 3D printing pens. pla filament recommended extrusion/nozzle temperature is 190-230 °(374°F-446°F).
  • 【No Winding & No Plugging】 Fully automated production, strict manual inspection, to ensure the PLA wire is neat and easy to feed.perfect roundness and tight diameter tolerance, does not overlap or tangle. Melt well..
Check Stock

3pcs 500ml Plastic Safety lab Wash Bottle,Squeeze Bottle with Scale Labels (16 oz/3 Bottle).

  • 3 pcs squeeze bottles 500ml/16oz, watering machine commonly used for irrigation by multi-meat plants or washing labware..
  • Soft plastic production, translucent state, through extrusion to allow water to flow out..
  • Slim water pipe, easy to grasp the direction, if the water flow is small, can adjust the shear port part..
  • The bottle body is marked with a scale to make it easy to know how much water has been poured to prevent the plant from being watered..
  • Vertical nozzle design, water can reach the root directly, avoid touching the leaves, non-toxic tasteless health and environmental protection..
Check Stock