Categories

Best Window Crank Adapter

PRIME-LINE Products H 3966 Spline Socket Crank Handle, Stone, Smooth 360-Degree Operation

  • CASEMENT CRANK HANDLE – The H 3966 Casement Window Crank Handle from Prime-Line features 3/8-inch bore and a 3-1/8-inch reach. It has a smooth 360-degree operation that allows you to easily open and close windows as needed..
  • DIECAST CONSTRUCTION – This window crank features a durable diecast construction with a stone finish..
  • INSTALLATION – A Phillips head screwdriver will be required for the easy slip-on installation. The 3/8-inch bore is held firmly in place with the supplied set screw..
  • COMPATIBILITY – This Prime-Line Casement Crank Window Handle can be use on 3/8-inch spindles, including on most older Anderson casement operators..
  • PRIME-LINE GRADE – We specialize in repair and replacement hardware products for your home. Prime-Line’s commitment to quality results in repairs which look as good as the initial install, making us the go-to solution for our loyal customers..
Check Stock

Prime-Line H 3514 9 inch Diecast Construction Aluminum Painted Finish Left Hand Casement Operator with Square Body

  • Used on old style, steel-framed crank-out casement windows.
  • This is a left-handed operator. Handing is determined when facing the window from the inside looking out. Like the hinges, this operator will also mount on the left side of the window.
  • Hardened steel constructed arm and drive gears.
  • Equipped with a diecast crank handle and a 9 in. long hardened steel arm.
  • Installs with 4 screws. 1 pair spaced apart at 3-7/8 in. on center, and another pair at 4-3/4 in. on center.
Check Stock

Prime-Line TH 24086 Entrygard Nesting Operator Cover and Crank, White

  • Use this cover and handle with casement and awning operators that have 5/16 in. diameter splines.
  • The unfolded (opened) crank handle extends a total of 5 in. inward, but folds and nestles down to a low profile.
  • The operator cover is constructed of molded plastic, and the crank handle of diecast zinc.
  • The window crank features a set screw at the base of the handle allowing it to lock onto the spindle.
  • Both the operator crank handle and cover are easy to install.
Check Stock

CASTLECREEK Window Blind Shade Roller Sun Shade Cover Sunscreen Roll-Up Sand 8X6

  • WINDOW SHADE – The CASTLECREEK roller shade fits easily on your indoor windows, RV, sunroom windows, patio or out on the porch.
  • DURABLE - High-density polyethylene blocks out sun and heat. The roman shade is made from durable material.
  • BLOCKS UV RAYS – The breathable fabric lets air flow through whilst blocking out 90% of UV light. The damp proof coating prevents the buildup of....
  • HAND CRANK – The window shade for home features a clutch that locks at any height and a removable hand crank that raises and lowers the shade.
  • EASY TO CLEAN – The window covering shade simply wipes clean with a damp cloth. Includes headrail and mounting hardware.
Check Stock

gas engine crankshaft 3/4 to 1 inch sleeve + Crank Sleeve Adapter | 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key

  • ★★★ 100% brand new: 100% brand new 7/8 inch to 1 inch crank sleeve adapter with step keys. . Manufactured according to strict quality control standards, improved design to improve durability - 7/8 to 1 inch shaft adapter with clutch.
  • Note: For detailed product parameters, refer to the instructions. Please confirm whether the product is suitable for your equipment before ordering, I wish you a happy life - 7/8 centrifugal clutch.
  • ★★★ High-quality materials: Crank sleeve adapter is made of cold-rolled steel, CNC precision machining and rolling, high durability. - crankshaft sleeve 7/8 to 1 in.
  • ★★★ Applicable: It is used to convert the crankshaft from 7/8 inch to 1 inch shaft. The adapter is about 3 inches long and includes the stepping keys needed from 1/4 inch key mode to 3/16 key mode. - 7/8 to 1 crankshaft adapter.
  • ★★★ Tips: You can use the old clutch or pulley on the new engine. You may need to use a small hammer to gently hit it to make it fit snugly. Includes an adapter and keyway, the wider part of the key is located in the adapter..
Check Stock

Knitting Machine Adapter - Crank Handle Adapter for Sentro Knitting Machine Drill w/ Hex Steel Bit Power Screwdriver Attachment Quick Knit Power Adapter for Sentro 22 Sentro 40 Sentro 48 Jamit Pink

  • [Package Contents] Our knitting machine adapter set includes a crank handle adapter and a 1/4" hex steel bit. They free up your hands and allow you to....
  • [Ideal Adaptability] Our quick knit power adapter is suitable for various brands and models of knitting machines, including but not limited to: Sentro....
  • [Reliable Materials] The crank handle adapter is made of PETG plastic and the hex bit are made of strong and corrosion-resistant steel. Because of....
  • [So Easy to Use] The standard 1/4" hex bit can be easily fitted into almost any standard electric screwdriver and is also easy to remove them. So you....
  • [Warm Tips] As the knitting machines that our products are suitable for are mainly manually operated, we recommend using a medium speed power adapter....
Check Stock

Darton 300-018 Dry Cylinder Sleeve Kit for H22 & H23

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4” to 1” diameter. It comes with 1.77"" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

RadioShack AM/FM/Weather Band Portable Crank Radio

  • Here's the radio you want to have handy when the going gets tough..
  • RadioShack's AM/FM/WX Crank Radio keeps you informed in an emergency and includes an LED flashlight to help you see in the dark..
  • You can keep its included 3.6V Ni-MH rechargeable battery charged with the hand crank..
  • Stereo headphone jack It also runs on an AC adapter or three "AA" batteries (sold separately)..
Check Stock

AGPTEK Solar Lantern 5 Mode Hand Crank Dynamo 36 LED Rechargeable Camping Lantern Emergency Light Ultra Bright LED Lantern - Car Charge - Camping Gear for Hiking Emergencies Hurricane Outages

  • 5 Charging Methods: Solar Powered, Crank Dynamo, Car Adapter, AC Adapter or 3 x AAA Battery..
  • Green Power: Hand Crank Dynamo Solar 36 LED Lantern Outdoor Super Bright Camping Work Light..
  • Low Energy Consumption: Built in the Polysilicon solar panels, brighter than the other camping light and lower energy consumption..
  • USB Output: A universal USB charging port for charging mobile phones and other devices (output: DC 5V/1A)..
  • 2 Brightness Modes: Bright mode [adequate for reading and most normal activity], Super bright mode..
Check Stock

1 Pair Casement Window Hinge, 10 Inch Stainless Steel Finish Adjustable/2 Pack Standard Duty Concealed Hinge, Universal E-Gard Corrosion Resistant Coating Friction Stay Hinges for Awning/Hopper

  • Concealed window hinges are made of stainless-steel mounting plates and steel link arms..
  • Link arms are finished in a corrosive resistant e-gard coating which comes in a light gray color..
  • Widely used with crank-out & push-out casement windows, crank-out & push-out awning windows, tilt-in hopper windows & transom windows..
  • Freely adjustable，smooth and easy to operate when open and close.
  • Package come with 1 pair concealed window hinge, but fasteners are not included (Fit for M4*16/M4*18/M4*20 screw).
Check Stock

SPI Fix Kit 2010-2012 fits Polaris 800 Sleds 85mm Pistons Bearings & Fix Kit

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1"-3/4"x1/4"-3/16" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Wiseco 74.0Mm Black Anodized Piston Ring Compressor Sleeve By Jm Auto Racing (Rcs07400)

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 7/8" to 1" diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

AA Performance Products 88 x 69mm 1700cc Slip-in Piston & Cylinder Kit, Fits VW

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft for 5/8" x 3/4" x 3" diameter.It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock