MARRTEUM 3/16\ Toggle Bolt and Wing Nut Zinc Plated Steel Toggle Drywall Anchors Screws for Hanging Heavy Items, 20 PCS
- ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
- ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
- ✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
- ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
- ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check StockASLEEP AT THE WHEEL / Red Wing / 45rpm FJO! record
- The quick hub wing nut is made of plastic material, durable and high quality.
- The quick wing nut helps speed up the balancing process with its quick release threads.
- This tool allows the wing nut to slide in and out of position when the release lever is pressed, which is very convenient to use.
- There are four dimensions of wheel balancer quick release hub wing nuts for your selection.
- It fits well with ranger, launch wheel balancers and more.
Check StockPAGOW Power Wing Nut Driver Set Wing Nut Drill Bit Socket Wrench Tool Set 1/4 Hex Shank for Panel Nuts Screws Eye C Hook Bolt Q-Hanger
- SAVES YOUR TIME: Wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane....
- Quickly to tighten, just simply turn the wing nut with a power drill. Your impact driver or drill you drive just about any wing nuts bolt or C head....
- Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware....
- This Steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6....
- This little wing nut driver is made from CR-V steel, highly strong and sturdy.
Check StockPAGOW 2pcs Power Wing Nut Driver Set Wing Nut Drill Bit Socket Wrench Tool Set 1/4 Hex Shank for Panel Nuts Screws Eye C Hook Bolt Q-Hanger
- This wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing....
- Quickly to tighten, just simply turn the wing nut with a power drill. Your impact driver or drill you drive just about any wing nuts bolt or C head....
- Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware....
- This Steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6....
- This little wing nut driver is made from CR-V steel, highly strong and sturdy.
Check StockGibraltar 9710-TP Straight Cymbal Stand
- Designed to solve two basic problems we hear about all the time: stands are too heavy And mounting cymbals with wing nuts takes time and is frustrating.
- Gibraltar turning Point cymbal tripod base is made from chrome plated l-stock aluminum in a sleek arrow design.
- Gives the stability of double bracing but the weight of single braced stand.
- Gibraltar patented Swing nut Auto cymbal tilter. Just press down on the spring loaded tilter turn the swing nut, mount the cymbal and felt and that's it, no wing to lose and you saves you time.
- Re-designed "super-lock" Hinged height adjustment with no metal to metal contact and wing adjust memory lock.
Check Stock5/8 -11 Grade 2 Malleable Iron Zinc Plated Wing Nuts 5 pk.
- Price For: Each Basic Material: Malleable Iron System of Measurement: Inch Material Grade: Grade 2 Fastener Thread Type: UNC Nut Style: Wing Nut Fastener Thread Direction: Right Hand Item: Wing Nut Wing Span: 4.50" Height: 1-7/8" Fastener Finish: Zinc Plated Dia./Thread Size: 5/8"-11 Country of Origin (subject to change): Multiple.
Check Stock
Zen Water - Water Filter System, Portable Water Purification System, 4-Gallon Countertop Dispenser
- Transform tap water into clean, healthy, alkaline mineral water. o-rings and the wing nut are attached to the stem of the ceramic filter.
- 5 Functions Combined in 1 System: Filter, Purify, Mineralize, Alkalize and Magnetize.
- Mountain-spring fresh taste by the bottle or cup. Our advanced system's enlightened approach combines activated charcoal (carbon) with far-infrared ceramic, silica sand, and mineral-imbuing stone cartridges.
- Ceramic filter will last 1,000 gallons or 1 year.
- 5-Stage mineral filter will last 500 gallons or 6 months.
- The ceramic O ring is attached to the stem of the ceramic filter. The Magnetic nut is attached to the stem of the Magnetic Tap/Spout. Simply turn the ceramic filter upside down,the o-rings and the wing nut are attached to the stem to prevent the wing nut from scratching/damaging the surface of the ceramic.
- The Countertop system comes complete with: Micro-Ceramic Filter, 5-Stage Mineral Cartridge Filter, Maifan Mineral Stones and Magnetized Spigot. The System can be used with or without the base. Not recommended for use with microbiologically unsafe water. o-rings and wing nut are attached onto the stem of the ceramic filter..
Check Stock
LONKER (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4\ Hex Shank Drills Bits for Panel Nuts screws eye C hook bolt (2-pcs)
- This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch).
- the outer diameter of the socket is about 17.8mm(0.7 inch).
- and the slots on the drill bit tool is 4mm(1.55 inch) wide..
- 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
- Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
- quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
- Hurricane Wing Nuts Driver Set A must have tools for hurricane/Snowstorm protection for windows doors hardware.
Check Stock
48PCS Toggle Bolt and Wing Nut Set Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes 1/8 3/16 1/4
- ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
- ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
- ✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
- ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
- ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock
24PCS Toggle Bolt and Wing Nut Set, Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes(1/8'', 3/16'', 1/4'')
- ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
- ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
- ✈【What You Get】- 24pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 10pcs 1/8inch, 8pcs 3/16inch and 6pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
- ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
- ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check StockKURUI Heavy Duty Hollow Wall Anchors for Drywall 24Pc Toggle Bolts and Wing Nut Kit Hollow Drywall Anchors and Screws Assortment Set 3 Sizes Butterfly Anchors 1/8in 3/16in 1/4in
- ...HANGING TASKS – The drywall anchors are designed with spreading butterfly wing nuts, when knocked in hollow walls the wings will automatically spread to increase the area of the thrust surface, which enhances the load bearing of the toggle bolts for heavy-duty hanging tasks..
- WIDELY APPLICABLE – Our toggle bolts assortment kit with multiple size options allows you to easily hang items such as television, painting, mirror, shelves, pictures onto hollow walls safely and with ease..
- WHAT YOU GET – The package includes 12pcs 1/8in toggle bolts and nuts set, 6pcs 3/16in drywall anchors and nuts set, 4pcs 1/4in heavy-duty wall anchors, all the piece are well packaged in a beautiful clear plastic box. If you have any question about this toggle bolts and nuts assortment kit, please feel free to contact us!.
Check StockWREOW Wing Nut Driver Set 1/4\ Hex Shank Slot Wingnut Drill Bit Socket Wrenches Tools Set for Panel Nuts,Screws Eye C Hook Bolt and Q-Hanger (3 PACK)
- This compact wing nut driver is made from CR-V steel, highly strong and sturdy..
- These wing nut driver sets are designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
- Just pop it into a power screwdriver and get the wingnut / shutters installed without concerning about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
- Quickly to tighten and simply turn the wing nut by power drill. Works on any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand..
- The total length of the tool is about 6.55cm(2.6 inch).
- the outer diameter of the socket is about 17.8mm(0.7 inch).
- and the slot cutout is 4mm(0.157 inch) wide..
Check Stock
PANOVO (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4\ Hex Shank Drills Bits for Panel Nuts screws eye hook bolt
- 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
- quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or head Eye hook screw up to 5x faster than you can by hand..
- Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
- This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch).
- the outer diameter of the socket is about 17.8mm(0.7 inch).
- and the slots on the drill bit tool is 4mm(1.55 inch) wide..
- Wing Nuts Driver Set A must have tools for Snowstorm protection for windows doors hardware.
Check Stock
