Categories

Best Wing Nut Clamps

QiiMii Stainless Steel 304 Heavy Duty Tri Clamp Clover Single Pin with Wing Nut for Ferrule TC 2 inch 10 pack

  • Tube OD: 2 Inch, Flange Size: 64MM, Fits 2 Inch Tri-clamp.
  • Type: stainless steel 304 Single pin heavy duty clamp with cross hole wing nut.
  • Fit for all other homebrew stuff sanitary fittings.
  • Free Bonus: Buy Clamps, Get Gasket For Free.
Check Stock

QiiMii 13MHHM Stainless Steel 304 Single Pin Heavy Duty Tri Clamp with Wing Nut for Ferrule TC 2 10 Pack 2 Inch

  • Type: stainless steel 304 single pin heavy duty clamp with cross hole wing nut.
  • Fit for all other homebrew stuff sanitary fittings.
  • Free Bonus: Buy Clamps, Get Gasket For Free.
Check Stock

ASLEEP AT THE WHEEL / Red Wing / 45rpm FJO! record

  • The quick hub wing nut is made of plastic material, durable and high quality.
  • The quick wing nut helps speed up the balancing process with its quick release threads.
  • This tool allows the wing nut to slide in and out of position when the release lever is pressed, which is very convenient to use.
  • There are four dimensions of wheel balancer quick release hub wing nuts for your selection.
  • It fits well with ranger, launch wheel balancers and more.
Check Stock

PAGOW Power Wing Nut Driver Set Wing Nut Drill Bit Socket Wrench Tool Set 1/4 Hex Shank for Panel Nuts Screws Eye C Hook Bolt Q-Hanger

  • SAVES YOUR TIME: Wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane....
  • Quickly to tighten, just simply turn the wing nut with a power drill. Your impact driver or drill you drive just about any wing nuts bolt or C head....
  • Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware....
  • This Steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6....
  • This little wing nut driver is made from CR-V steel, highly strong and sturdy.
Check Stock

PAGOW 2pcs Power Wing Nut Driver Set Wing Nut Drill Bit Socket Wrench Tool Set 1/4 Hex Shank for Panel Nuts Screws Eye C Hook Bolt Q-Hanger

  • This wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing....
  • Quickly to tighten, just simply turn the wing nut with a power drill. Your impact driver or drill you drive just about any wing nuts bolt or C head....
  • Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware....
  • This Steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6....
  • This little wing nut driver is made from CR-V steel, highly strong and sturdy.
Check Stock

Gibraltar 9710-TP Straight Cymbal Stand

  • Designed to solve two basic problems we hear about all the time: stands are too heavy And mounting cymbals with wing nuts takes time and is frustrating.
  • Gibraltar turning Point cymbal tripod base is made from chrome plated l-stock aluminum in a sleek arrow design.
  • Gives the stability of double bracing but the weight of single braced stand.
  • Gibraltar patented Swing nut Auto cymbal tilter. Just press down on the spring loaded tilter turn the swing nut, mount the cymbal and felt and that's it, no wing to lose and you saves you time.
  • Re-designed "super-lock" Hinged height adjustment with no metal to metal contact and wing adjust memory lock.
Check Stock

5/8 -11 Grade 2 Malleable Iron Zinc Plated Wing Nuts 5 pk.

  • Price For: Each Basic Material: Malleable Iron System of Measurement: Inch Material Grade: Grade 2 Fastener Thread Type: UNC Nut Style: Wing Nut Fastener Thread Direction: Right Hand Item: Wing Nut Wing Span: 4.50" Height: 1-7/8" Fastener Finish: Zinc Plated Dia./Thread Size: 5/8"-11 Country of Origin (subject to change): Multiple.
Check Stock

Zen Water - Water Filter System, Portable Water Purification System, 4-Gallon Countertop Dispenser

  • Transform tap water into clean, healthy, alkaline mineral water. o-rings and the wing nut are attached to the stem of the ceramic filter.
  • 5 Functions Combined in 1 System: Filter, Purify, Mineralize, Alkalize and Magnetize.
  • Mountain-spring fresh taste by the bottle or cup. Our advanced system's enlightened approach combines activated charcoal (carbon) with far-infrared ceramic, silica sand, and mineral-imbuing stone cartridges.
  • Ceramic filter will last 1,000 gallons or 1 year.
  • 5-Stage mineral filter will last 500 gallons or 6 months.
  • The ceramic O ring is attached to the stem of the ceramic filter. The Magnetic nut is attached to the stem of the Magnetic Tap/Spout. Simply turn the ceramic filter upside down,the o-rings and the wing nut are attached to the stem to prevent the wing nut from scratching/damaging the surface of the ceramic.
  • The Countertop system comes complete with: Micro-Ceramic Filter, 5-Stage Mineral Cartridge Filter, Maifan Mineral Stones and Magnetized Spigot. The System can be used with or without the base. Not recommended for use with microbiologically unsafe water. o-rings and wing nut are attached onto the stem of the ceramic filter..
Check Stock

LONKER (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4\ Hex Shank Drills Bits for Panel Nuts screws eye C hook bolt (2-pcs)

  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slots on the drill bit tool is 4mm(1.55 inch) wide..
  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • Hurricane Wing Nuts Driver Set A must have tools for hurricane/Snowstorm protection for windows doors hardware.
Check Stock

STEELSOFT Extra Thick (6-ply) Flexible Dryer Vent Duct Hose 4 inch 8 Feet Heavy Duty, 4'' Aluminum Foil Ducting Pipe Tube Dryer Hose Vent Kit with 4 Metal Hose Clamps

  • ...er is slightly larger than 4'' to fit most US standard dryer vent hose connector. Both inner plastic reinforced ends are great for quick installation. The flexible dryer vent hose maintains 4in diameter inside, whether compressed or stretched. Stretch it to 8 ft long or compress a little for 5 feet short..
  • More Hose Clamps: Our dryer vent hose kit is with 4 piece hose clamps. 2 wing nut hose clamps are perfect to dryer vent hose for tight space quick connect or disconnect, as you do not need a tool. For some dryer models, the key type maybe not available so you can use other 2 pcs 5/16" Hex dryer hose clamps optional..
  • Multi-Purpose: STEELSOFT 4 inch flexible duct is very handy for many HVAC applications, such as clothes dryer vent pipe, bathroom exhaust fan, grow tent vent and portable ac unit. It is a durable and heavy duty 4 inch flex duct hose for less replacement!.
Check Stock

STEELSOFT Extra Thick (6-ply) 4 inch Flexible Dryer Vent Hose Tubing 25 Feet Extra Long Heavy Duty, 4'' Aluminum Foil Flex Duct Hose Air ducting Pipe for Exhaust Fan Grow Tent with 4 Clamps

  • ... vent hose maintains 4in diameter inside, whether compressed or stretched. You can stretch it to extra long 25 ft or cut the dryer vent pipe into suitable length by a utility knife and wire cutter. Our 25 feet model is without plastic inner reinforce ends like 8 feet, but it is still very easy to install..
  • More Hose Clamps: Our dryer vent kit is with 4 piece hose clamps. 2 wing nut hose clamps are perfect to dryer vent hose for tight space quick connect or disconnect, as you do not need a tool to tighten. For some dryer models, the key type maybe not available so you can use other 2 screw clamps optional. For grow tent ducting, you will need to cut several air duct so 4 clamps for securing are perfect!.
  • Multi-Purpose: STEELSOFT 4 inch foil flex duct is very handy for many HVAC applications, such as dryer vent pipe ducting, bathroom exhaust fan, grow tent ventilation and portable air conditioning unit 4 inch air duct vent hose. It is a much more durable and heavy duty 4 inch aluminum ducting rigid for less replacement..
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

WREOW Wing Nut Driver Set 1/4\ Hex Shank Slot Wingnut Drill Bit Socket Wrenches Tools Set for Panel Nuts,Screws Eye C Hook Bolt and Q-Hanger (3 PACK)

  • This compact wing nut driver is made from CR-V steel, highly strong and sturdy..
  • These wing nut driver sets are designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concerning about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • Quickly to tighten and simply turn the wing nut by power drill. Works on any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand..
  • The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slot cutout is 4mm(0.157 inch) wide..
Check Stock