Best Wiper Transmission Linkage

Mr. Gasket Air Cleaner Spacer/Adapter Kit, Black

  • Helps Clear Throttle Or Transmission Linkage.
Check Stock

IMS 317321 Flightline Folding Shift Lever, Gray

  • Made of steel and has a folding tip to minimize the damaging effects of impact, reducing the chance of damaging your transmission or shift shaft.
  • Stiffer design eliminates that sloppy feeling of stock levers for more positive shifting response.
  • Won’t let the bike jump out of gear when the lever hits an obstacle.
Check Stock

IMS 312223 Flightline Folding Shift Lever

  • For: Honda XR250L 91-98, XR250R 86-04, XR400R 96-04.
  • Made of steel and has a folding tip to minimize the damaging effects of impact, reducing the chance of damaging your transmission or shift shaft.
  • Stiffer design eliminates that sloppy feeling of stock levers for more positive shifting response.
  • Won’t let the bike jump out of gear when the lever hits an obstacle.
  • Cheaper and more durable than stock shift levers.
Check Stock

Bushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit

  • Kit includes replacement bushing and application specific installation tools..
  • Text and video instructions along with tech support make installation very easy..
  • Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
Check Stock

WEISHUJI 313MM Wheelbase Link Rod, 313MM Wheelbase Link Rod Chassis Linkage, Upper & Lower Rod Link Linkage for 1/10 RC Axial SCX10 313mm Wheelbase

  • 313MM Wheelbase Link Rod is suitable for Axial SCX10 90022 90027 90028 1/10 RC Car Crawler..
  • 313MM Wheelbase Link Rod is made of aluminum, 313MM Wheelbase Link Rod Chassis Linkage ensures you get the perfect between lightweight and toughness..
  • 313MM Wheelbase Link Rod provides you a more durable and stronger suspension linkage system..
  • 313MM Wheelbase Link Rod is 313MM, 313MM Wheelbase Link Rod Chassis Linkage is 7mm, Upper & Lower Rod Link Linkage Ball head aperture is 3mm..
  • Package of 313MM Wheelbase Link Rod includes: 2 x Upper & Lower Rod Link Linkage (114mm/4.49inch) 2 x Upper & Lower Rod Link Linkage (129mm/5.08inch) 4 x Upper & Lower Rod Link Linkage (122mm/4.80inch).
Check Stock

Tama Dyna-Sync Twin Pedal

  • Optimized Transmission Design: By precisely positioning and aligning the contact point transmission angles between the cam, direct link, and footboard, you achieve the perfect overall balance of power-speed-feel.
  • Slidable Cam: Upper cam section slides back and forth in a 'non-stop' action to adjust the cam-turning radius. A larger turning radius provides for a more linear motion between footboard and beater and results in a high degree of sensitivity for nuanced performance.
  • Dyna-Sync Footboard Angle Design: Integrates into the clam-shaped connection point between linkage and footboard and is fully adjustable to deliver a totally personalized pedal angle adjustment.
  • Dyna Beater: Featuring black felt and a slightly tapered shape, this traditional style beater provides impact to the bass drum head surface evenly to maximize clear, dynamic articulation.
  • Sync-Loop: Sync-Loop is a 1.5x heavier gauge steel spring compared to our established Cobra loop. The Sync-loop assists the return of the footboard to the original position to provide an extra element of quickness to the pedal and slides on the bass plate so drummers can customize their own level of pedal return assistance.
Check Stock

Shifter Cables Shift Linkage For RSX K20 K24 K Swap Series EG EK K-Series Civic

  • There may be some oil stains left in the process, don’t worry, it will not affect the applicability.
  • Package included:1 ×RSX Shifter Cables Shift Linkage..
  • For: RSX Type-S & K-Swap Vehicles THESE CABLES MUST BE USED WITH THE K TUNED STYLE TRANSMISSION BRACKET!.
Check Stock

Steelman 6-Quart Oil Measuring and Dispensing Jug

  • Translucent High-Density polyethylene construction.
  • Polyethylene Dust cap to keep out debris.
  • Excellent for transferring Engine Oils, Transmission Oil, Wiper Fluids, other Automotive Fluids.
Check Stock

Crown Automotive (J5758904) Wiper Switch

  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep.
  • Crown also supports its entire line with a 12 month/12,000 mile warranty.
  • The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components.
  • Crown Automotive J5758904 SWITCH WIPER (INTERMITTENT).
Check Stock

BushingFix® Si2Kit™ - Replacement Automatic Transmission Shift Cable Bushing and Repair Kit

  • Please look at the picture of the cable ends this kit repairs before you order! If your cable end is different please contact us..
  • Direct replacement for a proper fit every time. A complete list of vehicle fitment can be seen in the Application Guide or on our website..
  • Lifetime Warranty - This part has undergone a rigorous inspection to ensure high quality.
  • Kit includes replacement bushing and application specific installation tools. Automatic Transmission Shifter Linkage Replacement Bushing..
  • Easy to install: Text and video instructions along with tech support to assist you with installation..
Check Stock

Tektall Carburetor Throttle linkage kit for Weber 40/44/48mm bore IDF Carb VW Beetle T1 cooling

  • Top Quality Brand new aftermarket Tektall Carburetor Throttle Linkage kit, made from solid steel to resist failure caused by weakness in the original part's construction, durable and sturdy linkage contains all of the quality hardware and features for IDF Carburetor linkage..
  • Fitment: This Tektall carburetor Throttle linkage kit Fits for Weber 40mm 44mm 48mm bore IDF Dual Carburetors' mounting, which is always used on earlier VW Beetle T1 cooling Engines..
  • New adjustable drop rods and ball end carburettor throttle levers are included As pictured, Rods are about length 35cm center to center..
  • Tektall Carburetor Throttle Linkage kit has been redesigned for greater durability and steability. This whole kit has undergone try-on, corrosion and material testing to ensure a quality fit and long service life..
  • Easy installation, no drilling or tapping required. Please do match the fitment and the structure carefully before purchasing, Thanks.
Check Stock

Wexco 4R Wiper Motor - 4R1.12.R110D - 1.5" Shaft, 12 Volts, 3 spade wiring terminals

  • Durable Wiper Motor: the electric wiper motor is made using high quality materials. The heavy-duty construction assures longer durability in the harshest weather conditions and gives you an assurance of accelerating windshield wiper speed with ease, without causing any damage.
  • High Performance Wiper Part: features 2.5" Shaft, 2" Thread and 5" Drum. The WWF motors include self-contained wiper system with oscillating 1/2" drum pivot shaft, and provides adjustable park position from left to right.
  • DIY Wiper Motor Replacement: this genuine windshield motor is easy to install and comes with gears and cables for easy fitting. The motor ncludes 2-speed wiper switch for managing speeds of wiper blades. Easy to fit, the motor can be used for a wide variety of trucks, equipment, tractors, boats, buses..
  • Replacement Wiper Motor Use: Wexco motor for wipers helps to accelerate the performance of most types of wiper blades. The manual speed feature helps to control speeds based on cleaning requirements of windshields and provides manual adjustment of wiping angle for maximum range of cleaning, up to 110 degrees.
  • Salient Features: Wexco windscreen wiper motor comes with 2.5-inch shaft and the 12v wiper motor helps in hassle-free speed adjustment, from 40rpm to 60r....
Check Stock

Tub Drain Linkage Assembly With Trip Lever and Strainer Done Cove, Fit for Trip Lever Bath Tub Waste and Overflow Drain by Artiwell

  • TUB DRAIN ASSEMBLY LINKAGE: Designed to repair and replace a worn-out Trip-lever drain assembly linkage that operates the opening and closing of the Trip Lever Bath Tub Waste Overflow Drain, The brass construction that provides strength and durability and will endure the rigors of every day use..
  • FULL REPAIR ASSEMBLIES PROVIDED: Full repair assemblies for trip lever waste and overflow drain assembly, This kits are include tub drain assembly linkage , Chrome trip lever flace plate With matching screws and strainer done cover with matching screws, one-stop purchasing can save your cost and time..
  • FIT STANDARD TRIP LEVER BATH TUB DRAIN: The height can be adjusted from 13-1/4” to 15-1/4” inches, Can fit 14” to 16” Standard Trip Lever Bath Tub Drain..
  • FIT MORE HIGHER TRIP LEVER BATH TUB DRAIN: With an Extension linkage rod, Do it yourself to add the 8” Extension Rod onto the Original Linkage assembly so that can extend the length of the Linkage assembly, can fit 22 Inch to 24 Inch height Trip Lever Bath Tube..
  • DIAMETER: 1-5/16” dimeter, specifically made to repair trip-lever drain assemblies. The brass construction that provides strength and durability and will endure the rigors of every day use..
Check Stock