Categories

Best Wire Connection Terminal

400Pcs 2.8/4.8/6.3mm Quick Splice Male and Female Wire Spade Connector Crimp Terminal Block Assortment Kit Golden with Insulating Sleeve for Electrical Wiring Car Audio Speaker N-002

  • ...s terminal set contains 480 products, 240 terminal insulated sleeves, 120 female insulated sleeve, and 480 total products. It is a fastel terminal that is always used for car, motorcycle, home center, wiring work, repair..
  • It is made of high quality brass, and it has good electrical conductivity and durability. This connection terminal set has a large number of male Messiah terminals and insulated male / female sleeve, so please use it in a safe manner..
  • The safety cover is attached to each of the male and female terminals. It is the terminal terminal set suitable for insulation such as electric wire, horn, general relay, etc. A flat terminal terminal is used for connecting horn, speaker, and general relay..
  • First, the insulated sleeve is connected to the wire, and then the female and the male terminal of the male are connected to the end of the cable. Please note: connect the wiring cord using a dedicated electrician pouch..
  • This terminal set (110, 50, 187, 40, 250, 30) comes with a plastic storage case, easy to carry and take out. It is widely applied to automobiles, motorcycles, transportation, machinery, distribution, electricity, electronic industries, home and new sources. It is applicable to car and home cable connection..
Check Stock

2Pcs Battery Terminal Connectors, 4 Way Positive Negative Car Battery Terminals Clamp Connector Quick Release Disconnect for SAE/JIS Type A Posts, for Marine Car RV (yellow)

  • Dimension - For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in..
  • Easy to use -The battery post terminals connectors are easy to identify with positive (red) and negative(black) labeled. Comes with 1 hex key for easy installation. Wiring is easy to modify and connection is firm. Batteries can be connected to the battery posts by pressing down the lever, so no tools are needed..
  • 4 Way Battery Terminal -The SAE battery terminals connectors has 4 posts for wire connection. Designed for multiple cable connections, mainly used for SAE / JIS TYPE A rear car battery..
  • Sturdy & Durable - The quick disconnect battery terminal made of tinned copper not only have good conductivity and corrosion resistance, but also can reduce voltage distortion and transmission loss..
  • Wide Application - Our battery terminal connectors suitable for Cars, Vans, Motorhomes, Caravan, Truck, Marine Batteries,etc. Just make sure to connect the correct terminal for the correct polarity. Works great with good electrical conductivity and corrosion resistance..
Check Stock

ManYee 300pcs 2.8/4.8/6.3mm Female Spade Connectors for Car Audio Speaker Brass Crimp Terminals Spade Electrical Crimp Connector Kit with Insulating Sleeve Quick Wire Splice Terminal AWG 22-14 Gauge

  • 【High quality brass plating】Female spade connectors made of brass plating, oxidation resistance, also prevents breakage during use. Copper barrel ensure excellent wire contact to increase the conductivity.
  • 【Multiple sizes】6.3 Brass crimp terminal,compatible wire:0.75-2.5mm²(AWG 18-14)，4.8 Brass crimp terminal, compatible wire: 0.75-2.5mm²(AWG 18-14), 2.8 Brass crimp terminal, compatible wire: 0.5-1.5mm²(AWG 22-16).
  • 【Wildly application】Spade connector convenient and the connection is completed quickly, used widely car/boat speaker，machinery, electric power, home appliance, computer and more.
  • 【Insulating sleeve】Wire connectors come with transparent insulating sleevem that have feature of insulation and flame retardancy,safe and reliable to use.
  • 【Easy storage】6.3 brass crimp terminal(50pcs),4.8 brass crimp terminal(50pcs),2.8 brass crimp terminal(50pcs), 50pcs insulating sleeves of 3 sizes each(150pcs), and comes with a plastic box for easy storage and safe usage.
Check Stock

Dinkle DSS2.5N-02P DIN Rail Terminal Block Press-Fit Jumper DK2.5N Two Pole, Pack of 20

  • ❶PACKAGE - 10 x Fork Type Terminal Wire Jumper Block, 12 Positions..
  • ❷MATERIAL - Wire Terminal is made of brass with good electrical conductivity, nickel plating on the outer layer to prevent oxidation..
  • ❸DESIGN - The frame type wiring structure is suitable for round copper wire connection applications of unprocessed and live crimped tubular ends..
  • ❹APPLICATION - Used widely in various wire connection, such as machine, electric power, home appliance, computer or other automatic equipments..
  • ❺NOTICE - We are gradually changing the product brand name to "Xiaoyztan", due to different shipment batches, you may receive our old brand labels. Please don't worry and just identify the seller "Brisky Top"..
Check Stock

420pcs Non-Insulated Ring Terminals & Fork Connector Kit 22-16/16-14/12-10 Gauge Wire Lugs Battery Cable Terminals Wire Crimp Connectors High Temperature T2 Pure Non-Insulated Copper Connector

  • ...nder UL standard；High corrosion resistance；silver welding wire thickness: Comply with international standard,High temperature battery terminal connectors resistant heavy ring connector.Copper content ≥ 99%, conductivity ≥ 96%, high conductivity, ductility and corrosion resistance,It's a good helper for wire connection.
  • Fork Connector(AWG22-16)-0.12"-30pcs (AWG 22-16)-0.16" -30pcs (AWG 22-16)-0.2" -20pcs Fork Connector (AWG14-12)-0.12" -30pcs (AWG14-12)-0.16" -30pcs (AWG14-12)-0.2" - 20pcs (AWG14-12)-0.25" - 20pcs Fork Connector (AWG12-10)-0.2" -15pcs (AWG12-10)-0.25" ----- 15pcs.
  • Ring terminal(AWG22-16)-0.12"-30pcs (AWG 22-16)-0.16" -30pcs (AWG 22-16)-0.2" -20pcs Ring terminal (AWG14-12)-0.12" -30pcs (AWG14-12)-0.16" -30pcs (AWG14-12)-0.2" - 20pcs (AWG14-12)-0.25" - 20pcs Ring terminal(AWG12-10)-0.2" -15pcs (AWG12-10)-0.25" -15pcs.
Check Stock

50pcs Compact Wire Conductor Connector，one-to-one Quick Terminal Block Splicing Connectors,Assortment Conductor Can Splicing into 2/3/4/6 Way Butt Terminal Connectors

  • 【Package includes】Total 50PCS butt connectors (BL-SPL-1)， SPL-1 Butt Terminal Wire Connectors that can be flexibly assembled into 2/3/4/6 bit....
  • 【Higher security】 This wire connectors are universal for both hard and soft wires. You can use them to control multi lights by one switch.....
  • 【Easy to operate】:First remove the wire jacket (9~10mm), just push the orange clip slightly to the top 90°, insert the cable and switch off the....
  • 【Widely Application】Universal connectors are suitable for solid wire with 0.08 to 4 mm²/ 28-12AWG and for flexible wire with 0.08 to 2.5 mm² /....
  • 【Can be reused】Each connection terminal has a detection connection and can be recycled as well. Every junction independent shrapnel, different....
Check Stock

Rockford Fosgate 4 AWG Positive/Negative Car Amplifier Battery Terminal 2 Pack

  • Positive and negative battery terminal for car audio amplifiers.
  • Platinum plated terminals allow for both a positive and negative connection with the supplied sizing ring.
  • The set screw style connection eliminates the need for ring terminals.
  • Terminal allows for multiple wire size inputs.
Check Stock

AWBLIN Battery Terminal Connectors, 2PCS Quick Release Disconnect Multiple Car Battery Terminal Replacement with Hex Wrench, Positive Negative for SAE/JIS Type A Posts

  • 4WAY BATTERY TERMINALS: This Car Battery Connector Multiple has 4 post for wire connection. Well Designed for multiple cable connections. Wiring is easy to modify. Really Convenient wiring and firm connection. This Heavy Duty Battery Terminals can fit on round post auto batteries SAE/JIS Type A posts..
  • POSTIVE & NEGATIVE: Positive (19mm/0.75in) Battery Terminal Clamps + Negative (17mm/0.67in) Battery Terminal Clamps. The Positive Negative Battery Terminal ends is Suitable for Most Battery models. This Car Battery Cable Ends work great for replacing worn out and corroded terminals..
  • DIMENSION: For wires diameters 0.20in – 0.29in (AWG gauges 1 – 4) or section 16 – 35mm². Max wire clamp: 8mm/0.31in. After the Quick Release Battery Terminals installing battery, connects to the battery posts by pressing down the lever, so no tools needed. The Battery Post Terminals do easy to operation..
  • HIGH QUALITy: The Battery Terminal Ends are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss..
  • WIDE APPLICATION: These Automotive Battery Terminals can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries,RV etc. Just make sure that the Battery Clamps connect the correct....
Check Stock

Wire Tracker RJ11 RJ45 Cable Toner Line Finder Multifunction Wire Tracer Ethernet LAN Network Cable Collation Telephone Line Tester Continuity Checking with RJ11 Adapter, Toolkit, eBook

  • [Professional Wire Tracker] This instrument is a multi-functional handheld cable testing tool. It has wide application with reinforced cable types and multiple functions. It is a necessary testing tool for telecommunication engineering, wire engineering and network maintenance person.
  • [Wire Tracing] The capable of quickly finding the required line pairs among numerous ones. It is adaptable to network cable RJ45 terminal, telephone line RJ11 terminal, and other metal wires via the provided clip adapter.
  • [Network Cable Collation] Tests physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection.
  • [Line Level test, and Status of Telephone Line Test] The emitter can be used to judge Line Level, Positive and Negative Polarity, TIP and RING line, and whether the telephone line is idle, ringing or off-hook.
  • [Continuity Checking] This tool can check continuity of the tested wire. NOTE: The TONE and CONT indicators do not indicate the working status but the measuring result.
Check Stock

Battery Terminal Connectors - iGreely 2Pack Quick Release Disconnect Hex Wrench Car Battery End Positive Negative for SAE/JIS Type A Posts

  • Widely used for SAE/JIS A type rear car battery, 4 way for wire connection, very sturdy, not easy to be damaged..
  • The iGreely Battery Terminal Connectors are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss, can be used for a long time..
  • Come with Allen wrenches for easy installation, convenient wiring and firm connection..
  • Fitting for wires diameters 5.2 – 7.4mm (AWG gauges 1 – 4) or section 16 – 35mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in..
  • Package including: Battery Terminal Connectors x 2, 2 years long time warranty, just contact us if you have any issues about the quliaty or other questions, we will take the issue for you via replacement or refund..
Check Stock

TEMCo 4ga-750mcm HYDRAULIC LUG CRIMPER TOOL TH0034 - Electrical Battery Terminal Cable Wire

  • ❀【HIGH PRECISION JAW DESIGN】 Crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. This tool has....
  • ❀【ROTATE CRIMP DIES】The professional cable terminal crimping tool has 6mm²/10mm²16mm²/25mm²/35mm²/50mm² (Similar to AWG....
  • ❀【EASY OPERATION】 Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper....
  • ❀【ERGONOMIC DESIGN】The handle of the wire crimper is long for 10 inch and wrapped with soft rubber, ergonomic lever structure design can....
  • ❀【12PCS LUGS TUBULAR RING TERMINAL CONNECTORS】The crimper set contains 12PCS ring terminal connectors, save your time and money to buy other....
Check Stock

Car Battery Terminals Connectors with 4 Ways Battery Clamps Quick Disconnect Battery Terminal with Hex Wrench Tinned Copper,Positive&Negative Applicated in Car Truck RV etc.

  • 【4WAY BATTERY TERMINALS】This Car Battery Connector Multiple has 4 post for wire connection. Well Designed for multiple cable connections. Wiring is easy to modify. Really Convenient wiring and firm connection. This Heavy Duty Battery Terminals can fit on round post auto batteries SAE/JIS Type A posts..
  • 【POSTIVE & NEGATIVE】 Positive (19mm/0.75in) Battery Terminal Clamps + Negative (17mm/0.67in) Battery Terminal Clamps. The Positive Negative Battery Terminal ends is Suitable for Most Battery models. This Car Battery Cable Ends work great for replacing worn out and corroded terminals..
  • 【DIMENSION】For wires diameters 0.20in – 0.29in (AWG gauges 1 – 4) or section 16 – 35mm². Max wire clamp: 8mm/0.31in. After the Quick Release Battery Terminals installing battery, connects to the battery posts by pressing down the lever, so no tools needed. The Battery Post Terminals do easy to operation..
  • 【HIGH QUALITY】The Battery Terminal Ends are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss..
  • 【WIDE APPLICATION】These Automotive Battery Terminals can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries,RV etc. Just make sure that the Battery C....
Check Stock

WMYCONGCONG 3 Kits 8 Pin Way Waterproof Electrical Connector Plug for Car Automotive (8 Pin)

  • 8 pin way waterproof electric wire cable connector plug, fits 1.8mm terminals wire, designed for 22-18 AWG wire..
  • Waterproof cable connector, not be affected by water, dirt, fog, or other chemicals, convenient to use..
  • Ideal for car, truck, boat, motorcycle, trailer lighting systems, motorcycle, electric vehicle, household appliances, computer wire connector, and other wire connection..
  • Male Terminal Length: 24*23.5*36mm/0.94*0.93*1.42in(max.L*W*H).
  • Female Terminal Length: 31*30*27mm/1.22*1.18*1.06inch(max.L*W*H)..
  • Package Content: 3 * male connector housing, 3 * female connector housing, 24 * male terminals, 24 * female terminals, 48 * silicon rubber cable seals..
Check Stock