Best Wire Led Marker Lights
Partsam 10X 3.8 Amber 12V Front Side Marker 6 LED Trailer Truck Lorry Indicators Lights, Amber Rear Led Marker Trailer Parking Turn Signal Lights for Truck Bus Boat Rv Lorries SUV UTV
- Package includes 10 pieces 3.8 Inch Amber Led Trailer Marker Lights 6LED.
- free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the amber marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
- These small thin clearance lights need to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp).
- Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx..
- The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer.
- Partsam Amber Led Lights function as marker lights, clearance lights, runnling lights, side marker lights, front parking lights, indicator lights, identification lights, boat interior lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps and so on.
- We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright.
- The side marker indicator light is hardwired with 2 wires and c....
Check StockPartsam 30Pcs 3.8
- 3. When you wire several lights together, you can wire them in parallel.
- Light Size: 75mm x 20mm x 5mm (2.95″ x 0.8″ x 0.2″), Light Size with Black Base: 96mm x 20mm x 10mm (3.8″ x 0.8″ x 0.4″) and center to center distance: 3-5/16″ approx..
- Partsam Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on.
- As every truck lamp come with two wires, they can only use as one function a time.
- free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
- These lights don’t come with the on/off switch and Wire leads come out the back in the center so you must drill a hole in the mounting surface for them.
- 5.These are Waterproof, not submersible. Please do not use it under water.
- 2. These lights can not be set up to flash as strobes, of course, you can wire to a toggle (on/off) switch to make it come true.
Check Stock10Pcs 2 Inch Round LED Side Marker Clearance Lights for Trailers, 5 Amber and 5 Red Sealed 2 Round LED Trailer Marker Lights 4 LEDs w/Rubber Grommet Flush Mount 2 Wire Pigtails Truck RV Waterproof
- This listing features for 5 Pieces red 2 inch round led marker lights and 5 pieces 2 inch amber Round Trailer LED Clearance Marker Lights. These 2 Inch led marker lights are flush mounts to trailer trucks with rubber grommets and standard 2-prong wire pigtails.
- These 2 round led marker lights include grommets and pigtails for complete installation.
- Each 2 inch round trailer marker light come with 4 LEDs, providing you better visability when driving on road.
- Sonically sealed, IP65 waterproof housing and lens unit is submersible.
- Wiring tips: Each 2 inch round trailer side marker lights includes a standard 2 prong wire pigtails: White is the negative and black is the positive. Dimensions: Outer Diameter: 2.5"in., Inner Diameter: 2"in., High w/ Grommet: 1in.(depends how in you press the lights) , you may need to drill a hole about 2-5/16" to install.
- These 2 Round LED Light Side Marker Clearance lights are universal for almost all 12v dc vehicles like Truck, Trailers,Pick Up,UTE, UTV etc. Note: So these 2 round led lights can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, please install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side mar....
Check StockPartsam Thin Line 3.8" 6 LED Blue Side Led Trailer Marker Lights Sealed Clearance Light Indicators for Trucks Bus Trailer RV Camper Lorry Van UTV Marine Boat Stern Light Decoration Lights(10Pack)
- Package includes 10 pieces 3.8 Inch Blue Led Trailer Marker Lights 6LED.
- free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the blue marker lights or to the surface to which the blue light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
- These small thin clearance lights need to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp).
- Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx..
- The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer.
- Partsam blue led lights function as marker lights, clearance lights, runnling lights, side marker lights, license plate lights, indicator lights, identification lights, boat interior lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light,cockpit light, step lights, deck lights, trailer lights, led courtesy lights, stern light, stair lights, truck lamps and so on.
- Truly many customers use them as boat marine lights, very bright.
- The blue led strip light bar is hardwired with 2 w....
Check StockBJZ LED Trailer Marker Lights Amber 6 Led Side Marker Clearance Light Bar 12V 3.8" Front Rear Signal Indicator Smoked Light Strip Waterproof for Trailer Truck Van Pickup ATV UTV RV, 10Pcs
- ✔【Amber LED Side Light Bar Parameters】Pack of 10, each marker light with PC smoked lens, built-in 6 high-brightness LEDs, with ABS black base. Waterproof: IP67.
- ✔【Wide Application of LED Marker Lights】Fit for LED marker lights, side marker lights, trailer marker lights, clearance lights, indicator lights, tail lights, running lights, turn signal lights, brake lights, parking lights, grille lights, decorative lights, fog lights, undeglow lights and more..
- ✔【Applicable Models of LED Side Lights】Suitable for Truck, Trailer, Pickup, ATV, UTV, RV, SUV, Van, Offroad, Golf Cart, Bus, Motorcycle, Snowmobile, F350, F450, Lorry, Camper, etc..
- ✔【High quality Clearance Lights】External reinforced PC lens and scratch resistant ABS base with high brightness SMD LED wick inside. IP67 sealed waterproof, dustproof, shockproof, durable, and not easy to fade after long-term exposure. LED lights can output high-brightness light with very low power consumption, improving your safety when driving at night..
- ✔【Easy to Install】Surface mount, mounting hole distance is 3.34 inches (85mm). 2-wire connection: Red is Posi....
Check StockPartsam 2pcs 6" Amber LED Rectangle Tail Stop Marker Light Trailer Truck RV 3 Wires 21LED, 6x2 Rectangular Led Clearance Lights, 2x6 Big Side Marker Lights
- Package includes 2 Pieces 2x6 inch Amber Rectangular Trailer Marker Led Lights 3 Wires Surface Mount, 21 Led diodes per amber light.
- Sealed amber led Light, 3 Wires Setup, High Low Function. Other accessories are not included.
- Compared with those similar side marker lights on market which can be used as led marker light only, this 6 inch rectangle LED lamp is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These are a really popular style thanks to their multi-faceted design.
- Size: 6" x 2" x 1.4" approx. and hole to hole distance: 4.8". Dim Function draws 20 mA & Bright Function draws 110 mA approx.. This trailer clearance light is unversal for almost all 12V vehicles as well as the size fits.
- This amber marker lights is HARDWIRED with 3 wires: Black is ground, white is low brightness as marker lights, clearance lights or running lights, red is high brightness as turn signal lights.
- Commonly known as a trailer light, these 2" x 6" rectangular trailer lights can really be installed anywhere you'd like to surface mount them. It is going to fit perfectly on....
Check StockPartsam Rectangle 14x Amber/Red 4" Truck Boat Trailer Side Marker Indicator lights 8-LED Surface Mount
- Package includes 14 Pieces (7Red+7Amber) Universal 4 Inch Led Side Marker Indicator Lights. NOTE: This marker lights set includes standard nut and bolt for anchoring, not self tapping screws(bot specs: 0.3cm diameter and 2.6CM long). You may need to drill new mounting holes all the way through, then use the bolt and nut to install.
- 7 Pieces Red Led Marker Lights and 7 Pieces Amber Led Marker Lights.
- Light Size: 4" x 1.6" x 0.7" and Mounting holes spacing: 3.15in. approx.,operates form 9-16Volts.
- Each Clearance Light is built in 8 LEDs miro reflectors, provide you super night visability on the road.
- HARDWIRED WITH TWO WIRES: BLACK IS GROUND, YELLOW IS POSITIVE.
- This Rectangle led trailer light is surface mount and you can mount anywhere as long as the size fit.
- Usage: side marker lights, roof lights, corner lights, rear lights, identification lights fender lights,cab lights, clearance lights etc. Note: this led marker lights only come with one positive wire, one functions at a time. If you use it as the front turn signal lights, it may not be that bright, thanks.
- Application: Works on any 12V DC vehicles. Perfectly suitable for all kinds of trucks, Trailer, Semi-trailer, Lorry, Off-road vehicle, ATV, SUV, UTE, Pickup, Tractor, Bus, Car, Boat, Car....
Check Stock10Pcs 2 Inch Round Led Marker Lights, 2 Inch Round Trailer LED Side Marker and Clearance Marker Lights 4 LED Sealed Flush Mount with Rubber Grommets and 2 Prong Wire Pigtails Waterproof (5Red+5Amber)
- This listing features for 5 Pieces 2 Inch round amber led marker lights and 5 Pieces 2 Inch round red led marker lights. These 2 Inch led marker lights are flush mounts to trailer trucks with rubber grommets and standard 2-prong wire pigtails.
- These 2 round led marker lights include grommets and pigtails for complete installation.
- Each 2 inch round trailer marker light come with 4 LEDs, providing you better visability when driving on road.
- Sonically sealed, IP67 waterproof housing and lens unit is submersible.
- Wiring tips: Each 2 inch round trailer side marker lights includes a standard 2 prong wire pigtails: Black is the negative and red is the positive. Dimensions: Outer Diameter: 2.5"in., Inner Diameter: 2"in., High w/ Grommet: 1in.(depends how in you press the lights) , you may need to drill a hole about 2-5/16" to install.
- These 2 inch round led trailer clearance lights are universal for almost all 12v dc vehicles, such as Semi Truck Trailers, Utility Truck, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV etc. Note: So these 2 round led lights can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, please install 2 separate lights on your trailer - one as a front or rear....
Check StockPartsam Pair 6\ Amber Side Front Marker Light Turn Signal Light High Low Brightness Sealed, 20 Diodes, Trailer Clearance and led marker lights, 6x2 Rectangular Rectangle led lights, 3 Wires
- Package includes 2 Pieces 2" x 6" Rectangular Trailer Marker LED Lights 3 Wires in Clear Lens, 20 Led diodes per light.
- Sealed Light, 3 Wires Setup, High Low Function. Other accessories are not included.
- 6" amber led marker lights 3 wres in clear lens: 6 inch rectangle LED lamp for use as a combination turn signal lights and running lamps, can be installed anywhere you'd like to surface mount them. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker light (or only an auxiliary turn signal light) by using two wires and leaving the third wire unused.
- Hardwired with 3 wires: White is ground, black is low brightness as marker lights or running lights, red is high brightness as turn signal lights.
- Size: 6" x 2" x 1.4" approx. and hole to hole distance: 4.8".
- These 2x6 led trailer lights are universal for almost all 12V DC vehicles like truck trailers Motorhome or heavy trucks like peterbilt, kenworth, freightliner etc. You can found on road people use them for kenworth bumper lights, car aux turn signals, Motorhome turn signal lights and son on. Note: This 2x6 rectangular marker light is generally waterproof, please do not use it in hea....
Check StockPartsam 20Pcs 3.8" 6 LED Amber Side Marker Lights, Amber Trailer Marker Lights, Front Rear Side Marker Lamp Amber, Led Marker Lights for Trucks, Cab Marker, RV Marker light Yellow (Pack of 20)
- Package includes 20 pieces 3.8" Inch Led Trailer Marker Lights 6LED Amber Lens.
- free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
- These small thin clearance lights needs to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp).
- Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx..
- The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer.
- Partsam Amber Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on.
- We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright.
- The indicator light is hardwired with 2 wires and can be used as constant on trailer lights: black is negative and the yellow....
Check StockPartsam 14Pcs 6.5" Inch Amber LED Side Marker Lights Clearance 16 Diodes Surface Mount Led Cab Panel Lights Turn Signals Sealed Waterproof 12V
- Partsam 14 Pieces 6.5 inch amber 16 diode LED marker lights - Amber Lens. These side marker lights function at 12 volts dc current. Each led marker light contains 16 high-flux LEDs and consumes less energy than incandescent lamps.
- These oval led marker lights can be used as a combination turn signal and running lamp. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. This trailer marker light is a flush mount style light and Mounting hardware not included.
- Dimensions: 16.5cm(6-1/2") x 5.5cm(2") x 2cm(3/4"). Hole to Hole Distance: 118mm (about 4-5/8").
- can be function as marker light, clearance lights, turn signal lights.
- fits in a combo-style hole and Chrome bezel hides mounting screws.
- sonically-sealed lens and IP65 waterproof housing, please do not use it under water.
- Different from many other truck marker lights in the market, there led marker clearance lights have a more modern, curvy shape and look great on your bumper, cab-and-sleeper kits, fender guards, and just about everywhere else you can imagine. Its long, thin footprint and flush-mount installation makes it a ....
Check StockStar Force: Death Mark (Star Force Space Opera Series Book 67)
- Application: High Quality Thin-design Smoke Black Lens Amber LED Marker Light, Stylish & Functional as side marker lights, clearance lights, indicator lights, identification lights, utility lights etc..
- Specification:12V Each Light with High Quality 6 LEDs.
- Waterproof + Shock Proof + Vibration + Dust Proof.
- Brightness: 120 lumen each light with 6 pcs High Quality SMD LED 50,000hrs lifetime..
- Two-wire design includes both lead wire and ground wire for mounting to all surfaces.
- The Black Wire is Negative. Light Dimension: 98mm x 20mm x 10mm (3.8" x 0.8" x 0.4") approx. Distance between center-to-center holes: 82mm (3.2") approx. Easy to Install with FREE Screw set included & Foam tape base..
- Easy to Install, Long-lasting and Durable, Longer Life LED Lifetime, Minimal Maintenance Cost. Good Looking and Utility, Energy Saving, Environmental Protection, Waterproof, Reliable and Safe. Increase Safety when Driving at Night..
- Function: Fits for most Buses/Trucks/Trailers/Lorries.
- can be used for side marker light, rear light, indicator light, turn signal light, rear tail light, license light, Parking light etc. Anywhere you can image as well as the size fit.
Check StockPartsam 6" Rectangular LED Combination Tail Lights Kit Red, 12V LED Submersible Sealed Rectangular Boat Trailer Stop Turn Tail License Plate Brake Running Light Kit w/25ft Wiring Harness 4Pin+Bracket
- ...re side clearance lights. If your trailer already have amber side lights you can use this light kit. Otherwise, please kindly refer to partsam 12v led low profile rectangular trailer light kit.
- Functions: These rectangular combination tail lights do have built-in red side marker lights and serve as the following lighting functions when properly mounted: stop brake light, turn light, tail light, rear reflex, side marker, side reflex, license plate light(drive side only).
- Different from many other 8 inch rectangular trailer taillights on market, these waterproof trailer light kit has different light dimensions about 5.9"L*3.35"W*2.28"H, which offers you more applications.
- Sealed IP68 waterproof trailer lights: Submersible Rectangle LED trailer tail lights are equipt with the sealed circuit board and no screws on the lamp surface, which makes it ideal for use on trailers that may be submerged, esp.for a boat trailer. We truly test it under water for 24 hours and it is totally submersible.
- This led trailer light has 23 diodes on driver side(14 diodes on front, 3 diodes for the side marker light and 6 diodes fo....
Check Stock