Categories

Best Wire Mesh Cable Grips

Hit Tools 22-ICC27 1-1/16-Inch Impact Wire Rope/Cable Cutter - Sold by Ucostore Only

  • ♛ Powerful Tool ------ Excellent tool for cutting stainless steel wire rope. This cable cutter is designed for cutting steel wire which up to 5/32”, If you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do. after 200 cuts off the 1/8'' 7x7 assemble coated steel security cable it still very sharp and clean cut..
  • ♛ High Quality ------ Steel Cable Cutter Cuts up to 5/32"" stainless steel cable. It features hardened steel blades, thumb catch designed for one-handed operation, and contoured cushion rubber handle non-slip grips..
  • ♛ Easy Cutting the Cable ------ This cable cutter can make very precise, very clean cuts without fraying or smashing the ends. it not only cut the cutaway cables and ripcords perfectly also great for grommet removal. This cable cutter handle is vinyl coated, which made it non-slip. The bright red handle made it easy to be found out in a crowded toolbox..
  • ♛ MULTI USAGE ------ Heavy duty steel wire rope cable cutter CUTS UP TO 5/32” stainless steel cable. This cable cutter is a perfect tool for cutting cable, wire rope, ripcords..
  • ♛ WHAT YOU GET ------ In this kit, You will get 1Pcs Excellent Cable Cutter tool for cutting stainless steel wire rope. Precise without frayi....
Check Stock

Ascend Tools 7 inch Wire Rope & Electrical Cable Cutter for Railing, Aircraft Seismic Structural Bicycle Cable | Induction Hardened Blades, No Frayed Cuts

  • USABILITY – For cutting stranded wire rope also known as aircraft cable, seismic cable, electric cable, structural cable, railing, decking, fences or bicycle brake cable..
  • PERFORMANCE – Cuts up to 3/16” (5mm, 4AWG) steel, copper, aluminum stranded cable. No frayed cuts, no fanning, splaying or squashing / flattening under pressure. Blades are very sharp and shear wire cleanly and easily. Beats competition on number of cuts made and cutting force required. Unlike other wire cutters the cuts are clean without fraying or flowering..
  • CAPACITY – These wire cutters can cut steel wire rope 3/16"(5mm), aircraft cable 3/16"(5mm), copper and aluminum Cable 15/64"(6mm), soft wire rope 1/4"(6.5mm), 7x7 stainless steel cable and more..
  • CONSTRUCTION – Blades are made of high-carbon steel from Japan, are induction hardened to provide a clean cut.
  • blades hardened to HRC 60-62 for strength and durability. A safety lock is provided for protection. The tang runs long into the handles for efficient force transfer. The pivot point allows adjustment of tension..
  • FEATURES – Swing lock mechanism for safety through one hand operation. Spring loaded to reduce hand fatigue. The asymmetric grip is a unique feature that compliments how a hand grips naturally – ergonomi....
Check Stock

Greenlee 722 Wire Rope & Wire Cutter

  • cuts hard steel wire up to 3/32" (2.4mm).
  • cuts copper/aluminum cable up to 15/64" (6mm)..
  • Heavy-duty forged steel blades and handles.
  • Heat treated, precision ground, shear action cutting blades.
Check Stock

Southwire CSK5 Cable Splicing Kit. 5-Piece

  • Cable splicers kit ideal for prepping installation of category Cable..
Check Stock

Woodhead 35970 Pulling Grip, Junior Duty, Flexible Eye, 1700lb Approximate Break Strength, 5.00\ Mesh Length, .25–.36\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 5 in. in mesh length and works with 0.36 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Woodhead 35974 Pulling Grip, Junior Duty, Flexible Eye, 4100lb Approximate Break Strength, 10.00\ Mesh Length, .75–.99\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 10 in. in mesh length and works with 0.99 in. cable diameter. The pulling grip cable maintains an approximate break strength of 4100 lb..
Check Stock

Woodhead 35972 Pulling Grip, Junior Duty, Flexible Eye, 1700lb Approximate Break Strength, 8.00\ Mesh Length, .50–.61\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 7 in. in mesh length and works with 0.61 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Woodhead 35973 Pulling Grip, Junior Duty, Flexible Eye, 2800lb Approximate Break Strength, 10.00\ Mesh Length, .62–.74\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 10 in. in mesh length and works with 0.74 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Woodhead 35975 Pulling Grip, Junior Duty, Flexible Eye, 4100lb Approximate Break Strength, 12.00\ Mesh Length, 1.00–1.24\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 12 in. in mesh length and works with 1.24 in. cable diameter. The pulling grip cable maintains an approximate break strength of 4100 lb..
Check Stock

Poodle Clipping and Grooming: The International Reference

  • High Quality Cable Cutter - This cable cutter works excellent in cutting up to 5/32" wire rope cable of all kinds. It is widely used in industrial and home applications like cable railing, fencing, bike brakes, and other DIY projects. Recommend using with 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09. Package includes: 1pcs cable cutter.
  • Clean Cut - The blade of this wire rope cutter is quite sharp and durable since the blade is made of manganese steel and has been hardened by high-frequency quenching. This steel wire cable cutter can make exact and clean cuts without fraying or smashing the cable ends.
  • Safe and Easy - The safety lock prevents accidental opens and cuts that might hurt you. The ergonomic one-hand operation and non-slip rubber grips make it work easily. With telescopic spring and lightweight design , it is beginner-friendly and portable.
  • Pre-Designed System - We pre-designed a NightScape cable railing system to help you get a fully customized project, including black cable railing kit CB05, adhesive washer CR86, stainless steel cable WR17, cable cutter CR12, socket wrench CT16, dril....
Check Stock

IFUN Jewelry Castable Resin for 405nm LCD 3D Printer Jewelry Cast Lost Wax Cast SLA UV Cure Photosensitive Resin Liquid Red 500g

  • Sharp and Strong: Small wire cutter has an 1/2" long heat-treated carbon steel jaw with angled head design. Flush Cutter with improved blades design snips wire up to 16 AWG.
  • Precision Wire Cutter: Flush Cut Micro Cutter with angled head is nice for tight cuts. Excellent for zip ties, beading wire, trimming circuit boards, jewelry making, model kit, Ethernet cable preparation, electronics work and any that requires a flush cut.
  • Non-slip Hand Grips: Wire snips with non-slip hand grips with curved fore-edge provide comfort and control.Compact design increases access in confined areas.
  • Spring-loaded: Steel return spring for increased comfort during repetitive cutting.
  • Tips: To ensure the durability of the cutters, not for use on steel wire, do not use it to cut very hard or big gauges wires.
Check Stock

Woodhead 35905 Pulling Grip, Light Duty, Flexible Eye, 5800lb Approximate Break Strength, 17.00\ Mesh Length, 1.25–1.49\ Cable Diameter

  • Flexible Cable Grip: this wire mesh pulling grip features a flexible eye design, which enables it to work perfectly in generous and tight spaces.
  • Shoulder Protectors: the cord grip features shoulder protectors across the center of the grip within a raceway to ensure a bump less pull and long-life operation.
  • Superior Strength: manufactured using galvanized steel, the wire supporting grip is resistant to rust and corrosion and thus offers extended durability. This electric mesh grip is designed for applications requiring additional strength.
  • Easy Installation the smooth and thin profile of wire mesh grip makes it easy-to-use, quick-to-install and reusable.
  • Specifications: the light duty pulling grip has a cable diameter of 1.49 in. and maintains a pull capacity of 5800 lb. This single weave wire mesh grip has a mesh length of 1.41 in..
Check Stock

Woodhead 36575 Support Grip, Service Drop, Single Eye, 500lb Approximate Break Strength, 5.00\ Mesh Length, 5.00\ Bale Length, .30–.43\ Cable Diameter

  • Service Drop Grip: this single weave mesh grip attaches to any fixed structure with ease. Single weave mesh design offers maximum strength, eliminating the need of an additional hardware.
  • Mesh Material: service drop cable strain relief grip is made using Tinned-Bronze wire mesh that offers corrosion resistance. This pulling grip finds application in light-duty cable placement.
  • Durability: the tinned-bronze support grip has top-mounted eye protector and closed mesh design that boosts durability, stability, and gripping strength.
  • Application: wire support grip is used for the service entrance cables, and for the repositioning of any fixed or moving structures.
  • Specifications: single eye cable support with 5.00 in. bale length has a mesh length of 5.00 in. and an approximate break strength of 500 lb. It has a cable diameter is 0.30–0.43 in..
Check Stock