Categories

Best Wire Mounting Bracket

BestMounts Single Gang (1-Gang) Low Voltage Mounting Bracket (12 Pack)

  • PACKAGE INCLUDE: 12 Pack - Single Gang Low Voltage Bracket.
  • COST-EFFECTIVE 12-PACK of low voltage mounting brackets is enough for a few renovation projects at home or in the office.
  • EASY TO INSTALL - Fully adjustable, ideal solution for mounting low voltage wires (phone, internet, TV, video).
  • Adjusts to fit various wall thickness, the bracket wings secure when mounting screws are tightened.
  • Drywall Horizontal or vertical mounting. Great for Wire Brush, Pass Through Holes.
Check Stock

Dr.Acces Golf Cart Rear View Mirror with LED Turn Signal | Golf Cart Side Mirror with LED trun Signal Fits EZ-GO Club Car Yamaha etc Most Golf Cart

  • Universal Side Mirror with LED Turn Signal including Installation instructions, 180° extra Adjustable wide panoramic.
  • Installation Step 1:Find desired mounting location and mark with a marker. Drill 2 small 1/8” holes in strut for mounting hardware. Drill 1/4” hole for wire. Or run your wires down strut, secure wires using mounting ties..
  • Installation Step 2:Using a wire snake feed wires in through strut and out the bottom..
  • Installation Step 3: Loosen hardware to mount LED mirror Bracket using supplied hardware. Reattach mirror to bracket using hardware from and tighten at desired mirror location..
  • Installation Step 4: a.Up-plug head-light. Use a multi meter to find power and ground for the blinker. This will supply power to the LED mirror. To do this engage blinker on turn signal, the pin that shows 12V flashing is your blinker 12V(+). b.Attach Red wire to the wire found on the harness that showed 12V(+) flashing in step 3 using a Splice Wire Connector and secure.Re-attach harness to Headlight and repeat steps 1-7 on opposite side..
Check Stock

Vertically Driven 792501 6 Speaker Upholstered Sound Bar Wrangler 87-02

  • Includes 2 Long mounting bracket (1997-2003 TJ) , 2 Short mounting bracket (1987-1996 YJ) , 4 M6-1.0 x 3/4 Screw/Bolt , 4 5/16” x !: Sheet metal screw , (4) 5/16” x ! Flat washer , (4)5/16” x ! Lock washer , (1) Wire Harness – 10’ Long.
Check Stock

Ring Spare Parts Kit for Floodlight Cam Wired Pro, Black

  • Everything you need to set up your Ring Floodlight Cam Wired Pro in just a few minutes..
  • Includes a screwdriver, mounting bracket, mounting screws, screw caps, metal crossbar bracket, and wire nuts..
  • Only works with Ring Floodlight Cam Wired Pro..
Check Stock

BWP Single 1-Gang Drywall Bracket Face Wall Plate Mount Mud Ring Low Voltage Mounting Bracket (1 Gang, 12 Pack)

  • PACKAGE INCLUDE: 12 Pack - Single Gang Low Voltage Bracket.
  • COST-EFFECTIVE 12-PACK of low voltage mounting brackets is enough for a few renovation projects at home or in the office.
  • Adjusts to fit various wall thickness, the bracket wings secure when mounting screws are tightened.
  • EASY TO INSTALL - Fully adjustable, ideal solution for mounting low voltage wires (phone, internet, TV, video).
  • Drywall Horizontal or vertical mounting. Great for Wire Brush, Pass Through Holes.
Check Stock

Lumitronics License Plate Lamp Light with Bracket for Trailers, Boats, Cars, Trucks, RV, and Cars

  • DESCRIPTION: License plate light with grey coated plastic housing & steel license plate bracket.
  • FEATURES: Mounting ears for surface mount and 6.8 Lumens.
  • DESIGN: Single wire design grounds through mounting hardware and attaches to the bolt or bracket.
  • INCLUDED: Gasket for weather-tight seal. Replaceable bulb.
Check Stock

diyTech Premium 6 Speaker Wall Plate, Speaker Wire Wall Plate, Supports 6 Speaker Configurations, w/Mounting Bracket, 1 Gang Screwless - White

  • SIX (6) SPRING LOADED SPEAKER PORTS - Our premium speaker wire connectors are far superior and much easier to use than traditional banana plugs and support up to 6 speaker setups. It accepts up to 12 gauge speaker wire, for that crisp high-fidelity surround sound experience..
  • EASY TO USE - Each spring loaded speaker connector provides quick and easy speaker wire installation. No need for additional products or tools. No need to purchase additional banana binding plugs, simply push and play. They provide a more secure connection and better audio reproduction than traditional banana binding post wall plates..
  • MOUNTING BRACKET INCLUDED - With our quality low voltage mounting bracket, you can get up and running quickly..
  • SUPERIOR QUALITY & BEAUTIFUL DESIGN – Our speaker wall plate isn't just functional, but stunningly beautiful and built to last for years of worry-free use. All screw hardware is hidden using a ridiculously easy snap-in installation, to give you that beautiful and professional look..
Check Stock

Nilight TL-11 1PC Red 9 LED ID Bar Marker Tail Black Stainless Steel Bracket for Truck Trailer Boat Identification Light, 2 Years Warranty

  • Enhanced Visibility and Safety: For your trailer 80” or wider that requires identification light, the ID bar marker light mounted on the top or between the taillights draws extra visibility for the wide range, makes the light more eye-catching to warn the upcoming car. Enhance your on-road safety.
  • Top LED Quality: 9 upgraded Piranha LED, which feature wider lighting angle, higher intensity light, and better heat dissipation, is used on the trailer light to make it very durable and output bright light without glare.
  • Ready For All Weather Abuse: IP67 waterproof sonically welded light housing, durable ABS cover and the anti-corrosion black base bracket, make the lightly well protected to withstand all weather abuse.
  • Considerate Design for You: Comes with 2 wire leads for straight forward electrical connection, red wire to positive, black wire for negative. Mounting bracket also features notches and carefully added glue at the back for easy wire routing and perfect surface mounting.
  • Universal for any 12V vehicles more than 80” wide like trucks, pickups, travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, SUV Motorhome etc. Package Include: 1x trailer light bar, 1x hardware pack.
Check Stock

12V Magnetic Towing Trailer Light Kit Amber/Red

  • Multi-functions Each light has 11 high quality LED outputs high brightness and low brightness Can functions perfectly as parking light stop light turn signal light tail light and brake light.
  • Highly Sealed & durable The front Polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed Waterproof enough to withstand all weather abuse.
  • Easy Wire Connection For wire connection white wire for ground black wire for low brightness tail light and red wire for high brightness brake light.
  • Light Bar Mounting To flush-mounting the light one option is to drill a center hole or use the existing hole to go through the back wire lead and then fix the two ends by drilling in the two screws provided The other option is to add some washer when fixing the two ends or use a bracket to mount the light to avoid drilling holes for the back wire lead.
  • Wide Application Can be perfectly used on most 12V heavy duty trucks, semi trailers, cargo trailers, boat trailers, travel trailers, horse trailers, RV camper work vehicles, etc. Package Include 2PCS trailer marker ID bar with 2 hardware pack.
Check Stock

2-Digit Take A Number System with Free Ticket Roll

  • 1 Microframe Model 5120 2-Digit LED Display with Power Adapter and 18ga, Two conductor wire. | 9.1-inch LED Display with 5.5-inch digits..
  • 1 B80 Ticket Dispenser with mounting bracket and hardware. | 1 Take-A-Number Sign.
  • 1 B80 Ticket Dispenser Counter Top Stand with mounting hardware..
  • 1 Roll of White 2-Digit Tickets (3,000 tickets per roll) | 2 Brass Push Buttons with 40 feet of 22ga, Two conductor wire. | 1 Wireless infrared remote control (batteries included)..
Check Stock

Furnace Hot Surface Ignitor / Igniter Fits Goodman 201657-03S

  • 90 Degree Mounting Bracket and Two High Temp Wire Nuts Included.
  • Will Also Work With Existing Snap-In Bracket.
  • Replaces Goodman - Amana - Janitrol Part Numbers B1401015 and B1401018.
Check Stock

Lutron Aurora Smart Bulb Dimmer Switch for Paddle Switches | for Philips Hue Smart Bulbs | Z3-1BRL-PKGD-WH | White

  • PROBLEM SOLVER: Philips Hue smart bulbs only work if the switch is in the ON position. The Aurora Smart dimmer switch keeps Philips Hue smart bulbs in ‘ready mode’, so you always have control of your smart bulbs.
  • PADDLE SWITCH SOLUTION: Converts an existing paddle or decorator switch into a smart bulb dimmer switch using included mounting bracket and wallplate.
  • STAYS CONNECTED: Aurora maintains connection with Philips Hue smart bulbs, even if the Wi Fi goes down, so that you always have control over your lights.
  • ANYONE CAN USE: Allows for anyone to adjust your Philips Hue smart bulbs at the wall, no app required.
  • RECOGNIZED AESTHETIC: Rotary knob easily provides the perfect lighting level.
  • tap to turn lights on/off, or rotate to dim/brighten lights.
  • SIMPLE SET-UP: Replace existing paddle switch with wallplate bracket.
  • simply remove existing paddle switch, cap wires and push into backbox and mount the wallplate bracket.
  • MOUNT ANYWHERe: Use the mounting bracket to mount Aurora on almost any surface - no cutting holes or pulling wire required.
  • PACKAGE INCLUDES: (1) Lutron Aurora Smart Bulb Dimmer, (1) Wallplate Bracket for Paddle Switches, and (1) wallplate.
Check Stock

Rockville DWB80W Dual 8\ White 800 Watt Marine Wakeboard Tower Speaker System

  • ...ne Wakeboard 360° Swivel Tower Speakers. (1) Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator.
  • Features: Pair Rockville RWB90B Black 8" 300w Marine Wakeboard 360° Swivel Tower Speakers. 8" Two-Way High Fidelity Speaker System. Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel. Includes Stainless Steel Mounting Hardware. 1" Polymide Dome Neodymium Midrange Tweeter.Built-In Two-Way Crossover Network..
  • Fully Marinized Against Salt & Fresh Water Conditions. Completely Water / Rust Resistant. Terminals Are Sealed with Rubber Gaskets. Specially Tuned for PA Voice Over. Polypropylene Mica Injected Cone with Santoprene Surround. High BL Magnet Motor Structure. Y30 High Density Magnets. Oversized 1.25” Kapton Voice Coil..
  • Features of RMWK4: Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit. 20 ' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable. 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment. 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable..
  • 25' 16 Gauge 100% Tinned-CCA, White, Non-Trans....
Check Stock