Feedback Control

  • DUAL-CHANNEL - Connect up to 2x electric actuators with potentiometer feedback to have them travel in parallel, sequence, or individually.
  • SYNCHRONIZE - Connect devices with potentiometers to synchronize their movements.
  • SAVE UP TO 3 PRESETS - Use the wired remote to save 3x preset locations.
  • COMPATIBILITY - With a current rating of 15A, this control system is easy to use with a variety of 12VDC or 24VDC devices. Includes wire harness for each channel.
  • SPECIAL ATTENTION: Use it only with an actuator with potentiometer feedback. See at our Store PA-14P model..
Check Stock

Feedback Control Model

  • DUAL-CHANNEL - Connect up to 2x electric actuators with potentiometer feedback to have them travel in parallel, sequence, or individually.
  • SYNCHRONIZE - Connect devices with potentiometers to synchronize their movements.
  • SAVE UP TO 3 PRESETS - Use the wired remote to save 3x preset locations.
  • COMPATIBILITY - With a current rating of 15A, this control system is easy to use with a variety of 12VDC or 24VDC devices. Includes wire harness for each channel.
  • SPECIAL ATTENTION: Use it only with an actuator with potentiometer feedback. See at our Store PA-14P model..
Check Stock

Oneflysky 2T1V Electric Guitar 500K Pots Control Knobs 5-Way Switch with Jack Wiring Harness Kit for Strat Style Guitar Replacements Black Cap

  • Circuit wiring set for SSS SSH style Fender Squier Stratocaster electric guitar, material: metal and wire, switch cap: Black.
  • Wiring harness: 1 volume / 2 tones / 5 way switch, 2 capacitors, 1 output jack socket.
  • 1 Volume and 2 Tone Knob Pots: Two A500k potentiometer, 1 B500k potentiometer.
  • Pots Shaft length: approx. 18mm / 0.71", Base diameter: approx. 16mm / 0.63", Switch: Approx. 52 x 48 x 12mm / 2.04 x 1.89 x 0.47 inch.
  • Wiring diagram as the picture seventh shown, this harness is completely prewired. All you need to do is solder your pickups to the switch and ground them to the volume pots.(1 colored wire from 1 pickup to any of the connectors on the neck side of the switch ( depending on where you want it) and the other wire from that pickup gets grounded.).
Check Stock

HENGYEE Guitar Screw Kit Assortment with Custom Acrylic Storage Box for Electric Guitar Bridge,Pickup Ring, Pickguard, Tuner

  • Circuit wiring set for SSS SSH style Fender Squier Stratocaster electric guitar, material: metal and wire, switch cap: Black.
  • Wiring harness: 1 volume / 2 tones / 5 way switch, 2 capacitors, 1 output jack socket.
  • 1 Volume and 2 Tone Knob Pots: Two A500k potentiometer, 1 B500k potentiometer.
Check Stock

Feedback Control for Computer Systems: Introducing Control Theory to Enterprise Programmers

  • DUAL-CHANNEL - Connect up to 2x electric actuators with potentiometer feedback to have them travel in parallel, sequence, or individually.
  • SYNCHRONIZE - Connect devices with potentiometers to synchronize their movements.
  • SAVE UP TO 3 PRESETS - Use the wired remote to save 3x preset locations.
  • COMPATIBILITY - With a current rating of 15A, this control system is easy to use with a variety of 12VDC or 24VDC devices. Includes wire harness for each channel.
  • SPECIAL ATTENTION: Use it only with an actuator with potentiometer feedback. See at our Store PA-14P model..
Check Stock

KST DS215MG Micro Digital Servo

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • It is tiny and lightweight with high output power..
  • Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats..
Check Stock

Synchronized or Individual Dual Potentiometer Actuator Controller - 30A - Wired Remote control kit for feedback electric actuator

  • DUAL-CHANNEL - Connect up to 2x electric actuators with potentiometer feedback to have them travel in parallel, sequence, or individually.
  • SYNCHRONIZE - Connect devices with potentiometers to synchronize their movements.
  • SAVE UP TO 3 PRESETS - Use the wired remote to save 3x preset locations.
  • COMPATIBILITY - With a current rating of 15A, this control system is easy to use with a variety of 12VDC or 24VDC devices. Includes wire harness for each channel.
  • SPECIAL ATTENTION: Use it only with an actuator with potentiometer feedback. See at our Store PA-14P model..
Check Stock

5 Pcs 10k Linear Potentiometer, 10K Ohm 3 Pin Linear Taper Adjustable Rotary Potentiometer with 7.8 Inch Long Connector Wire Cable and Black Knob Cover Cap for Change Resistance

  • Package Includes: you will get 5 potentiometers with wires (with nuts and washers) and 5 knobs, which are enough to meet your daily use and replacement needs, and you can also share them with family or friends who are in need.
  • Basic Information: product name: single linear rotary potentiometer.
  • Shaft Size: the shaft is 6 mm/ 0.2 inch in diameter and 15 mm/ 0.59 inch in length, and the mounting thread is 7 mm/ 0.3 inch in diameter.
  • You can rotate the shaft to adjust the resistance.
  • Knob Size: it is equipped with a knob for better use, and the black knob is 15 mm/ 0.6 inch deep and 17 mm/ 0.67 inch high.
  • The connector wire is 200 mm/ 7.8 inches long, which can be applied to connect potentiometer and power supply within a certain distance.
  • Wide Application: linear taper rotary potentiometer can be widely applied for photographic lenses, robotics, industrial controls, computer input devices such as trackballs, rotating radar platforms, and controlled stress rheometers.
Check Stock

uxcell Wirewound Ceramic Potentiometer Variable Rheostat Resistor 200W 1K Ohm with Knob

  • With the compact structure and heat dissipation design, a capability of overload has been built..
  • [ADVANTAGE]- Metal wire is wound on the tube coated with non-flammable material, good dissipation, high stability and long life. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range..
  • [BEST CHOICE]High precision, high power, high precision of resistance, High temperature resistance, low noise during operation, stable and reliable, can withstand high temperature and long service life..
  • [WIDELY - USED]- This variable wire wound resistor is widely used in power supply, transducer, elevators, arena and high requirement equipment industry. aging, load, simulation load test and inverter. Consumption of brakes, cranes, etc..
Check Stock

DROK® DC/DC Boost Converter 12-60V to 12-80V Step-up Voltage Regulator 600W Auto Power Supply Transformer Adjustable Output Volt Controller Stablilizer Board Laptop Motor

  • Red LED indicator will light on when moduel is power on.
  • Adopts 1mm dual-wire winding inductance, good filter capacitor and 8500 wiring terminals.
  • Please use a small screwdriver to adjust current potentiometer and voltage potentiometer.
  • 20A fuse in the input creates dual short-circuit protection and ensures security in usage.
  • Over-current protection and module decreases output volt automatically if input more than 17A.
Check Stock

Prewired Wiring Harness Kit for LP Electric Guitar 2T2V 500K Pots 3-position Toggle Switch with Jack for Dual Humbucker Gibson Les Pual Style Guitar Electronics Replacements White Cap

  • Circuit wiring set for LP SG EPI Style electric guitar, Material: Metal and wire, Switch Cap: White.
  • 2 volume / 2 tones / 3 way switch, 2 capacitors, 1 input jack socket, prewired components make for an easy install, each tone pot has its own 2A473J capacitor, as well replace all the electronics..
  • 2 Volume and 2 Tone Knob Pots: 2 B500k full size potentiometer, 2 A500k full size potentiometer, Pots Shaft length: approx. 18mm / 0.71", Base diameter: approx. 16mm / 0.63", Switch: Approx. 18 x 28 x 49mm / 0.71 x 1.1 x 1.9 inch.
  • 2 tone potentiometers with the green capacitors and 2 volume potentiometer with no capacitor, pots are smooth and consistent, switch is excellent and cool that it came with a white tip.
  • Wiring diagram as the picture seventh shown, this harness is completely prewired. All you need to do is solder your pickups to the switch and ground them to the volume pots, more instructions please help to see the description as below. (Any other problem about product or replacement, please help to contact the seller, The way to Contact Seller: Find your order -- Contact Seller, thanks.).
Check Stock

OCR 1K-500K ohm Potentiometer Kit 35 Sets Knurled Shaft Linear Potentiometer with Knobs Nuts and Washers 7 Values 1K 5K 10K 20K 50K 100K 500K 3 Terminal Rotary Potentiometer

  • ✅ Top adjustment type and knurled shaft single linear 3 terminal 7 values 1K 5K 10K 20K 50K 100K 500K Ohm rotary potentiometer..
  • ✅ Linear knurled shaft potentiometer. Shaft diameter:6mm, shaft length:17mm.
  • Mounting thread diameter:6mm, base size:16*7mm.
  • ✅ Potentiometer kit offers 35pcs potentiometer knob caps. 300 degree rotary knob for easily control the potentiometer..
  • ✅ Top adjustment type and knurled shaft for easy operate in daily use time. Stander round shaft can be push on potentiometer easily..
  • ✅ Taper potentiometer used for volume control of audio sets, car radios, amplifiers, mixers, synthesizers and other appliances. For electronic....
Check Stock

ELEGOO Electronic Fun Kit Bundle with Breadboard Cable Resistor, Capacitor, LED, Potentiometer (235 Items) for Arduino, Respberry Pi

  • This kit has all the components you need to start your projects for Arduino or Raspberry Pi and other microcontrollers.
  • With a precision potentiometer, better quality, power supply module and breadboard.
Check Stock