Categories

Best Wiring Ducts

Draft Blocker 4 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector (4'' Inch)

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check Stock

Draft Blocker - 4'' Inch Backdraft Damper Duct - Draft Stopper - Backflow Preventer - Inline Fan Vent - Vent Deflector (4'' Inch)

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check Stock

Frida Mom 2-in-1 Lactation Massager - Multiple Modes of Heat + Vibration for Clogged Milk Ducts, Increase Milk Flow, Breast Engorgement - USB Cord Included

  • Increase milk flow: vibration + heat bust through buildup + clogged ducts, and get milk flowing. Choose the mode you need to get the job done..
  • Relieve clogged ducts + engorgement: the breast care tool to have on hand for pain-in-the-boob nursing + PUMPING moments and to prevent other symptoms and supply issues..
  • Different ends + sides: help unclog stubborn ducts, pull out blocked milk and empty breasts..
  • Pocket-size + rechargeable. No batteries Needed, just recharge with USB cord - even on-the-go!.
  • Water resistant. Designed to be used for massages in the shower (when the flow won't go!)..
Check Stock

ANGKEEL Copper Foil Tape Cu≥99.98% Double Sided Conductive 1 inch x 50 Feet RF Metal Adhesive Tape for Grounding, EMI & Guitar Shielding, Stained Glass, Arts & Crafts, Electric Repairs, Soldering

  • ✅[Adequate Size]: Full roll measuring 1 inch wide x 50 feet long x 2.4 mil thick, (25mm x 15m x 0.06mm )..
  • ✅[Double Conductive]: The front and back sided of the metal copper adhesive tape provide stable electrical conductivity, can carry current just like a wire..
  • ✅[Say Goodbye to interference]: Usually used for wrap cables or internal components to protect electronic devices from electromagnetic, static electricity and other interference..
  • ✅[Easy to Use]: This duct tape is easy to install, suitable for irregular surfaces, can be easily twisted, bent and torn, no need to apply with other tool, making it easy to shape and mould..
  • ✅[Multi-purpose Tape]: Copper foil tape is used for stained glass window making, art decoration, DIY crafts, scrapbooking, eliminate guitar interference, ESD/EMI shielding, welding paper circuits, electrical repair, RFI signal blocking, wrapped harness, PCB wiring, Faraday box & Faraday cage, sealing hvac ducts & exhaust pipes.
Check Stock

Niteguy 140Pcs Plastic Rivet Clip,Plastic Fasteners Kit Fender Liner Fastener Rivet, for Ford GMC,Jeep Wrangler 07-15,Dodge Avenger 08-14,Auto Body Retainer Replacement Plastic Rivet Clip

  • 【Fitment】 Concorde 98-04 / Pacifica 04-08, Dodge 2500 94-10 / Avenger 08-14 / Durango 04-09, Ford Tempo 88-94, GMC Savana 96-02,Front Bumper, Fender, Fascia, Hood, Body Moldings, Air Ducts, Cladding, Gear Train, Wiring Repair, Seats, Adjusters, Recliners, Shields and Risers Rivet (Direct replacement, no need to modify).
  • 【Size】Fits hole diameter 6mm / 0.25inches, stem length 29mm / 1.18inches, head diameter 17mm / 0.67inches, panel range (grip): 5/32inches-13/32inches.
  • 【Material】Made of high-quality black nylon material, anti-wear, and anti-corrosion would not break or crack easily during use, suggest to use a rivet gun (not including).
  • 【Package】140pcs car clips complete your accessories stock, don't use every day, but when you need them, it's handy to have good clips on hand, OEM: # 10184895, 20452072, N803862-S, 06501559, 06506007AA.
  • 【Notice】Even though the product description states they will fit your vehicle, measure the diameter of the space the fastener is going into before ordering these clips.
Check Stock

Allstar ALL42151 Black 3" x 10' Brake Duct Hose

  • Brake duct hose measures 3 inch diameter x 10 feet long.
  • Hose is flexible, features a non-kink design, and directs air from the front ducts to the spindle ducts.
  • Made from a black 3 inch double-ply neoprene-coated woven fiberglass hose with a spring steel inner and external fiberglass supports.
  • Features a smooth inner wall for unrestricted air flow.
Check Stock

DGT35 Galvanized Round Transition (5\)

  • 【Size】Made of galvanized steel. Adapts 8 inches to 6 inches. Round Ducting Adaptor.
  • 【Widely Application】Designed for bathroom extractor fans, HVAC systems, inline ventilators, cooker hoods, tumble dryers, hydroponics, kitchen..
  • 【Adventages】Maintains airflow efficiency by creating a connection between two different sized duct openings..
  • 【How to Use】The solid duct reducer or increaser can be used when connecting two different solid or flexible ducts or ducts to ventilators, 8 to 6 inch, or vice versa..
  • 【Easy to Install】Put it in the two ducting, easy to install the air duct reducer..
Check Stock

EAZY2HD 24 Feet Flexible Dryer Duct Cleaning Kit Lint Remover,Extends up to 24 Feet,Two Synthetic Clean Brush Heads,Includes 18 Flexible Rods,Use With or Without a Power Drill

  • VALUABLE TOOL : Comes with 18 flexible rods and 2 brush heads. Our dryer vent cleaning brush is 4″ diameter, and can be used in 3-4″ ducts. These can also be used with a/c ducts and pellet stove pipes. They work great with PVC, flex ducts, metal ducts, pipes, and delivers results fast.Note:Please don’t use it for flexible foil duct work..
  • USE IN TIGHT SPACES: The rods are extremely durable, flexible and will bend with little to no effort at all. Keep the duct brush spinning at a low speed and use steady when working with a drill to prevent tearing of flexible vent..
  • EASY TO USE:Simply disconnect the pipe from the dryer and from the wall (connection is usually located right behind the dryer).
  • The dryer vent cleaner kit can be used connected to a drill. Always use the drill in a clockwise direction and low speed to prevent the rods from unscrewing at the threaded connections. Add extension rods as needed and secure them with duct tape..
  • SAFETY AND EFFICIENCY: With our dryer vent cleaning kit, delivers superior results and helps you prevent costly repairs. It helps prevent dryer fires by regularly removing dangerous lint build-up.In addition to helping to prevent dryer fires, this will also reduce drying time and help extend the life of y....
Check Stock

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Deflector Silver

  • 【Material】The 4 inch backdraft damper is made of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
  • 【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
  • 【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
  • 【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
  • 【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..
Check Stock

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Vent Deflector (4 in)

  • 【Material】The 4 inch backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
  • 【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
  • 【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
  • 【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
  • 【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..
Check Stock

ANGKEEL Copper Tape 2 Inch x 50 Feet Double Sided Conductive RF Cu99.98% Copper Foil Adhesive Tape for Stained Glass RFI/EMI & Guitar Shielding DIY Crafts Solder Faraday Shield Metal Ducts Wrap

  • ✅[Adequate Size]: Full roll measuring 2 inch wide x 50 feet long x 2.4 mil thick, (50mm x 15m x 0.06mm )..
  • ✅[Double Conductive]: The front and back sided of the metal copper adhesive tape provide stable electrical conductivity, can carry current just like a wire..
  • ✅[Say Goodbye to interference]: Usually used for wrap cables or internal components to protect electronic devices from electromagnetic, static electricity and other interference..
  • ✅[Easy to Use]: This duct tape is easy to install, suitable for irregular surfaces, can be easily twisted, bent and torn, no need to apply with other tool, making it easy to shape and mould..
  • ✅[Multi-purpose Tape]: Copper foil tape is used for stained glass window making, art decoration, DIY crafts, scrapbooking, eliminate guitar interference, ESD/EMI shielding, welding paper circuits, electrical repair, RFI signal blocking, wrapped harness, PCB wiring, Faraday box & Faraday cage, sealing hvac ducts & exhaust pipes.
Check Stock

Westspark 2' Fiber-Glass Cloth Tape Roll, 2 inches x 65 Yards Self-Adhesive Silver Duct Heat Reflective Tape, Insulation Resistant High Temperature HVAC Tape, Metal Repair, Patching Hot Cold Air

  • ➜ Insulation sealing tape Size: 2in, 20M, high-strength foil-scrim-kraft paper laminate backing resists tearing..
  • ➜ Fiber-Glass Composites cloth Foil Tape is waterproof, heat and high temperature resistant, rust proof, electronic jamming, for repairing, perfect shielding and anti-interference, with many applications..
  • ➜ Perfect for sealing air ducts, designed to easily for Pipe Sealing, HVAC, Metal Repair, Patching Hot Cold Air Ducts, Heat Insulation..
  • ➜ Self-Adhesive Heat Reflective Tape is waterproof, heat and high temperature resistant, rust proof, electronic jamming, for Pipe Sealing, HVAC, Metal Repair, Patching Hot Cold Air Ducts, Heat Insulation Wrap Exhaust Shield Thermal Barrier tape and so on..
  • ➜ This tape roll provides a durable bond at low and high temperatures. Conformable backing and pressure sensitive adhesive means it will adhere properly to a variety of smooth and irregular surfaces..
Check Stock

Taytools 465388 Set of 6 each 4 OD Blast Gates Self Cleaning No Clog Aluminum for Dust Collection System

  • Designed to fit 4" diameter hose or ducts.
  • Direct air flow to exactly where you need it and maximize dust extraction by opening and closing select ducts.
  • Open slot at back to for self-cleaning, no-clog operation.
  • Cast aluminum, steel sliding gate, locking knob.
Check Stock