Categories

Best With Piston Cylinder

CDHPOWER Super Motor PK80 Replaement with Iron Sleeve Cylinder 49mm Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • CDHPOWER Super pk80 motor Replaement:Iron Sleeve Cylinder 49mm:Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc pk80 motor kit.
  • High hole Piston kit installed well inside of cylinder and Long connecting rod AF80 or zmn80.
  • The casting cylinder head increases the horse power and this greatly cools off the engine. Would result better performance and longer life for your 2 Stroke Bicycle Engine. Casting cylinder head Height Max:51mm-52mm.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

CDHPOWER PK80 Motor Replacement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • PK80 MOTOR REPLACEMENT PARTS ONLY. piston kit is installed well inside of cylinder already.
  • better adjusting Clutch a little before riding.
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

TOP NOTCH PARTS CYLINDER PISTON GASKET OIL AIR FILTER TOP END KIT SET FITS YAMAHA RAPTOR 350 2004 2005 2006 2007 2008 2009 2010 2011

  • Replaces OEM Part # 1UY-11310-03-00, 1UY-11631-Y0.
  • CYLINDER PISTON GASKET OIL AIR FILTER TOP END KIT SET FITS YAMAHA RAPTOR 350 2004 2005 2006 2007 2008 2009 2010 2011.
  • PURCHASE INCLUDES: CYLINDER BLOCK. PISTON. PISTON RING KIT. PISTON PIN. CIRCLIPS. CYLINDER HEAD GASKET. PAPER CYLINDER BLOCK GASKET CHAIN TENSIONER,....
Check Stock

66mm 195cc Cylinder Head Piston Gasket Top End Kit Set for Yamaha Blaster 200 YFS 200 1988-2006 2XJ-11111-00-00 2XJ-11311-02-00

  • 【Wide Applications】This cylinder piston gasket top end kit replacement fit for Yamaha Blaster 200 YFS200 1988-2006.
  • 【Excellent Design】Complete standard sized replacement cylinder kit. Cylinder bore and stroke 66.00mm x 57.00mm. Cylinder displacement 195cc /....
  • 【Package Contents】Cylinder,Cylinder Head,Piston,Piston Pin,Piston Rings,Circlips,Needle Bearing,Head Gasket,Base Gasket,Valve for Seat....
  • 【Part Number】2XJ-11111-00-00,2XJ-11311-02-002XJ-11181-00-00 3JM-11351-02-00,B8E-S0000-00-00 2XJ-11631-01-97,4L0-11633-00-00,3JM-13621-00-00.
  • 【Premium Quality】Made of high-strength aluminium alloy material,can effectively improve heat、pressure and corrosion resistance.Heavy duty metal....
Check Stock

Car Engine Piston Ring Compressor Kit, Piston Ring Compression Tool with Ring Pliers & 14 Piston Rings(62-145mm),Pliers Set for Trucks and Cars

  • 【Piston Ring Pliers For Cylinder Installation】The tool set for compressing piston rings, used for cylinder installation. The fine tooth lock allows you to compress the belt in small increments, and the tool solution is suitable for almost all situations..
  • 【Piston Rings For Fine-Tooth Locking】The piston diameter is 62mm-145mm in a wide range of work, which can almost be fastened and adapted to most pistons.Holds the rings securely until the Piston is Reinstalled..
  • 【Piston ring size】 The size of the installed piston ring: 1:62-65mm, 2:75mm, 3:80mm, 4:85-86-87mm, 5:90-92-95mm, 6:100-102mm, 7:105 -105-108mm, 8:110mm, 9:113-114-115mm, 10:120-123mm, 11:125-126mm, 12:135-137mm, 13:140-142-145mm.Various piston rings are suitable for different types of motors..
  • 【Piston Ring Compressor Components Made of Steel and Iron】 The piston ring and pliers are made of high-quality manganese steel and durable iron. The handle of the pliers is made of forged steel.The pliers can be parallel or perpendicular to the cylinder and insert the piston at the fastest speed..
  • 【Pliers Tool Set With Tool Box】The case is beautifully designed and easy to carry. It is equipped with 14 piston rings and 1 pliers. Is an indispensable part of engines such as machinery, truc....
Check Stock

MOFANS 2XJ-11311-02-00 66mm Bore Cylinder Top End Kit Piston Gasket Assembly Kit Fit For Compatible With Yamaha Blaster 200 YFS 200 1988-2006

  • ▶ Fitment: Fit For Compatible With Yamaha Blaster 200 YFS 200 1988 89 90 91 92 93 94 95 96 97 98 99 2000 01 02 03 04 05 2006..
  • ▶ Replace Part Number: 2XJ-11311-02-00.
  • ▶ Features: Cylinder Piston Ring Gasket kit with precise density to provide a reliable seal with minimal tightening. Cylinder Piston Ring Gasket kit....
  • ▶ Perfect Replacement: Replacement cylinder piston ring gasket kit sets engineered from premium materials to provide exceptional service life and....
  • ▶ Package Includes: Cylinder + Piston + Wrist Pin +Circlips + Rings + Head Gasket + Base Gasket (as pictures shows)..
Check Stock

CDHPOWER 2 Stroke LD90 Motor w/o CDI -Upgraded pk80 Motor Silver Color Engine-Gas Motorized Bicycle 66cc/80cc

  • CDHPOWER LD90 Motor w/o CDI and Excluding 2pcs anti vibration black rubber for the motor mount,upgraded pk80 motor.
  • better adjusting Clutch a little before riding..
  • Includinhg spark plug and piston kit；Excluding two head plug CDI Box ( Asin for two head plug CDI: B098Q988VJ ).
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
  • FYI: the LD90 motor is compatible with all brand 2 stroke 66cc/80cc gas motor kit.
Check Stock

Glixal ATMT1-014 GY6 125cc Chinese Scooter ATV Moped Engine 52.4mm Cylinder kit with Piston Kit for 4T 152QMI JONWAY ZNEN Roketa JCL Taotao Dongfang

  • 1.This Cylinder fits the 76mm Bolt Pattern Engine, It will not work on the 80mm Bolt Pattern.
  • 2.Inner Diameter of Cylinder: 52.4mm and Outer Diameter of Piston Pin: 15mm.
  • 4.Include Cylinder,Piston,Piston Ring,Piston Pin,Piston Pin Clip,Valve Oil Seal,Gaskets,Tensioner Gasket,Exhaust Gasket,Intake&Exhaust Studs,Exhaust....
Check Stock

MYFULLY Office Chair Cylinder Replacement | Chair Gas Lift Cylinder 5 inch Long Extension Stroke Adjust Universal Size Lift Cylinder Fits Most Executive Chair Swivel Chair

  • Heavy Duty Office Chair Cylinder: The gas lift cylinder holds up to 385lb/175kg on most Swivel chairs. Hydraulic pneumatic shock piston is certified by SGS,high safety and explosion-proof,more durable..
  • 5" Piston Stroke for Adjusting Chair Height: Outer cylinder diameter: 1.9".
  • Smooth Operation & Noiseless: This chair cylinder replacement uses upgrade stainless steel lift rod. Full 360 degree rotation, smooth and noiseless movements to all directions..
  • Universal Chair Cylinder: Our office chair piston will fit most office, executive and computer chairs.(salon chairs, executive chairs, work chairs, rolling stools) on the market..
  • Easy to Install: This office chair cylinder replacement can be installed easily with no additional screws required. Take several minutes to refresh your old office chair and save costs! Package includes: a gas cylinder for office chair.
Check Stock

Wiseco 1614CD Ring Set for 41.00mm Cylinder Bore

  • High quality nodular cast iron material,corrosion-resistant and durable.
  • Effectively sealed gas,improve gas efficiency,to ensure the strong power of engine.
  • Scraping excess oil on the cylinder wall to ensure proper lubrication of the cylinder and piston.
  • To prevent the piston and the cylinder wall in direct contact,to ensure smooth movement of the piston,reduce friction resistance.
  • Quality Assurance!If you are not satisfied with our products,we accept all of the return,replacement or refund requests.
Check Stock

Square D 135-175 PSI Air Compressor Pressure Switch Control Valve 9013FHG42J59M1X

  • It is recommended on Twin Cylinder Air Compressor Pumps that both cylinder sleeves and piston rings be replaced at the same time so that the air compressor pump will produce equal air output and not be out of balance..
  • Features:The K-0650 Cylinder and Piston Ring Replacement Kit fits many model Oil-Free air compressors.
  • This K-0650 Cylinder and Piston Ring Replacement kit will fit both the single cylinder oil-free pumps and the twin cylinder oil-free pump made by DeVilbiss, Porter Cable, Sears Craftsman,DeWalt, Snap On, Ex-Cell, Air America, Charge Air Pro, Grainger, Stanley Black and Decker and many other privately labeled air compressors..
  • Package including: 1 x Air Compressor Cylinder & Ring Kit (As Picture Show ).
  • Aftermarket Product,Any product questions can be contacted by email, and the customer service team will reply to you within 24 hours..
Check Stock

Glixal 52mm Big Bore Cylinder Kit Rebuild Kit GY6 49cc 50cc to 105cc 139QMB 139QMA Scooter Moped ATV Go-Kart

  • 1.Please note this kit is only used for GY6 139QMB 4-Stroke Engine..
  • 4.Include Cylinder,Piston,Piston Ring,Piston Pin,Piston Pin Clip,Valve Oil Seal,Gaskets,Tensioner Gasket,Exhaust Gasket,Intake&Exhaust Studs,Exhaust....
  • 5. High Performance Upgrade 52mm Cylinder Rebuild Kit for GY6 49cc 50cc 60cc 80cc 100cc engine.
Check Stock

Office Chair Gas Lift Cylinder-Office Chair Replacement Parts, Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston,Universal Size

  • STANDARD SIZE OFFICE CHAIR CYLINDERS REPLACeMENT: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace hydraulic piston on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the chair gas cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - STRONGEST ON THE MARKET: Our gas lift cylinder passed the top-level test of BIFMA and TUV certification, the highest End Class 4 chair piston on market, which are known as the most durable, longest lasting, and highest quality gas lift cylinders, they can lift up and down 120,000 times without fail and can be support up to 1000lbs..
  • 4.7’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 264mm to 385mm ( 10.39 - 15.15"), minimum length: 10.39 inches.
  • maximum length when fully extended: 15.15 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair....
Check Stock