Categories

Best With Structural Steel

Lenox - 80775D2B93025 Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 119

  • Regular tooth design for general-purpose cutting.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
  • Flexible back is suitable for contoured cuts.
Check Stock

Little Giant WX-3660-34 Welded Steel Workbench, 1 Lower Shelf, 15,000 lb. Load Capacity, 34\ x 60\ x 36\

  • Welded steel workbench with gray powder coat finish and 15,000 lb. total load capacity.
  • 7 gauge steel top with 3" x 1-1/2" support frame made of structural C channel for strength.
  • 12 gauge steel lower shelf with 500 lb. load capacity for storing items.
  • Legs made of 3" C channel and welded to the top with 7-gauge gussets for strength.
  • 4-1/2" clearance between floor and lower shelf to accommodate forklift fork.
  • 7 Gauge Steel Top Supported by a frame of 3" x 1-1/2" Structural C Channel.
Check Stock

Little Giant WX-4284-34 Welded Steel Workbench, 1 Lower Shelf, 15,000 lb. Load Capacity, 34\ x 84\ x 42\

  • Welded steel workbench with gray powder coat finish and 15,000 lb. total load capacity.
  • 7 gauge steel top with 3" x 1-1/2" support frame made of structural C channel for strength.
  • 12 gauge steel lower shelf with 500 lb. load capacity for storing items.
  • Legs made of 3" C channel and welded to the top with 7-gauge gussets for strength.
  • 4-1/2" clearance between floor and lower shelf to accommodate forklift fork.
  • 7 Gauge Steel Top Supported by a frame of 3" x 1-1/2" Structural C Channel.
Check Stock

Lenox - 29232CLB72360 Classic Tuff Tooth Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 18 TPI

  • Tuff tooth design reduces tooth strippage.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
  • Wavy tooth set helps prevent stripping for cutting thin workpieces.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
Check Stock

Lenox Classic Tuff Tooth Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 186\ Length, 3/4\ Width, 0.035\ Thick, 3 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, tubular shapes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Raker set for general-purpose cutting applications.
Check Stock

Lenox Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93.5" Length, 1/2" Width, 0.025" Thick, 14-18 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Wavy set helps prevent stripping for cutting thin workpieces.
Check Stock

Lenox - 76123D2B51638 Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 18 TPI

  • Regular tooth design for general-purpose cutting.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
  • Flexible back is suitable for contoured cuts.
Check Stock

String Swing BCC03F4-FW-C Cello Hanger Wall Mount with Bow Holder Peg – Electric and Acoustic

  • ✔UNLIKE THE “TYPICAL” CELLO HANGERS OF UNKNOWN origin and quality that potentially puts even the finest CELLO like Cecilio, D Z Strad, Yamaha, Merano, and Primavera in “life threatening” danger, the STRING SWING CELLO HANGERS are CERTIFIED 100% MADE IN USA with AMERICAN STEEL and backed by a LIFETIME STRUCTURAL WARRANTY, all that to provide maximum structural integrity and safety, so no matter if you are playing your instruments or not, they are always in the “right hands”.
  • ✔CELLOS ARE MORE THAN JUST INSTRUMENTS – While safer when transported inside a case along with your rosin, bow, tuner, and endpin rest or anchor, cellos are also practically “meant” to be displayed for your enjoyment even when you are not rocking it, the STRING SWING CELLO HANGERS will turn your cello into a piece of “Wall Art” while keeping it safe and sound.
  • ✔YOKE PIVOTS TO ACCOMMODATE VARIOUS HEADSTOCKS– Great for cellos with various sized headstocks.
  • Personalized protective padding gently and securely supports the instruments.
  • Cradle hangs all cellos including electric and acoustic.
  • ✔OVER 30 YEARS SERVING MUSICIANS ALL OVER AMERICA – No matter what kind of Cell that you have, you can count on us to keep it safely stored, we have been crafting the....
Check Stock

Lenox - 72100CLB72360 Classic Tuff Tooth Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 8-12 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Vari-raker tooth set for multipurpose cutting applications.
Check Stock

Lenox - 80209D2B72390 Diemaster 2 Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 94\ Length, 1/2\ Width, 0.025\ Thick, 14 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
Check Stock

String Swing Drum Stick Holder - Stagehand Drumstick Container Bag Holds up to 8 Pairs of Zildjian Vic Firth ARLX and Vater Drumsticks - Two Clamps Attach Securely to Microphone & Cymbal Pole

  • ✔ DRUMSTICK HOLDER FOR A LIFETIME - Fits any Drum Set, even electronic or electric drums.
  • Made in the USA and backed by a LIFETIME STRUCTURAL WARRANTY,maximum structural integrity and safety.
  • So your drumsticks will always be ready for you.
  • ✔NON-SKID PADDING - Durable black powder coated Heavy Duty steel with Non-Skid padding can quickly be attached using only one hand and fits all mic, music, or cymbal stands, ranging from ½-1 inch in diameter – A great Drummer Gift.
  • ✔VERSATILE & AFFORDABLE DRUMS ACCESSORY – Universal Mount clip design can be clipped to any drumset or pole, even a drum set for kids – Easily Attachable, enables you to pick and store your drumsticks in seconds – For Home, Studio or while on stage!.
  • ✔OVER 30 YEARS SERVING MUSICIANS ALL OVER AMERICA – Our new Drumstick Holder is the most durable and reliable product of its kind in the market.
  • We have been crafting the best drum accessories, display systems and musical hardware that you can buy for over 30 years.
  • ✔LIFETIME STRUCTURAL WARRANTY - The String Swing Drum Stick Holder is made in the USA with solid HEAVY DUTY STEEL construction and backed by a LIFETIME STRUCTURAL WARRANTY – Make sure your drumsticks are always within reach by Adding yours to cart Now while su....
Check Stock

Cutting Wheel 4-1/2 Inch 100 PCS Cut Off Wheel 4.5"x.047"x7/8" Cutting Disc Ultra Thin Metal & Stainless Steel,Cutting Wheel Fits Angle Grinder Saw Grinder Metal Cut Tools

  • FITS ANY ANGLE GRINDER ：Grinder blades is 4.5"x.047"x7/8" total in 100 PCS.Fit for 4-1/2”Angle Grinders and compatible with All 4-1/2”Angle Grinders..
  • MULTIPLE UESES : Grinding Wheel are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals for aggressive cutting action.Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel.fast burr free cutting.
  • Package List:100Pcs 4 1/2 Inch Cut Off Wheel.
Check Stock

Lenox - 80162D2B51640 Diemaster 2 Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 10-14 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Vari-raker tooth set for general-purpose cutting applications.
Check Stock