Categories

Best Wl10 Tungsten Electrode

Baluue TIG Welding Tungsten Electrodes Ground Finish Welding Rods Thoriated Electrodes for WP

  • lanthanated tungsten rods Multiple choices for your high-quality welding..
  • lanthanated electrode Pure Tungsten forms a clean, balled tip when heated and provide great arc stability for AC welding with a balanced wave..
  • Welding Tungsten Electrode Rod Good mechanical cutting performance, good electrical conductivity, easy operation and long service life..
  • tig tungsten Smallest electron emission, low steam pressure, low resistance and good electrical conductivity..
  • ground annealed Tungsten electrodes Pure tungsten welding electrodes also provide good arc stability for AC sine wave welding, especially on aluminum and magnesium..
Check Stock

GOONSDS Tungsten Filament 99% Purity Tungsten Metal Wire Coil,Length 1m,Diameter 0.04mm

  • Purity: W ≥ 99% . Dimensions: diameter:0.04-0.1mm(Buy on demand) , length:1m. Package: 1 x Tungsten wire.
  • Tungsten and its alloys are widely used in electronics and power industry because of its strong plasticity, low evaporation rate, high melting point and strong electron emission ability. For example, due to its high luminous efficiency and long service life, tungsten filament is widely used in the manufacture of various bulb filaments, such as incandescent lamp, iodine tungsten lamp, etc,.
  • Tungsten wire is used to make direct hot cathode and grid of electronic oscillator tube and side hot cathode heater in various electronic instruments. The properties of tungsten make it suitable for TIG welding and other electrode materials similar to this kind of work..
  • It is widely used in aerospace, aviation, oil drilling, electrical instrument and other industries, such as manufacturing heat sink, balance weight of control rudder and contact materials of switch, circuit breaker, spot welding electrode, etc..
  • We are a supplier of high quality metal materials. We can provide you with the materials you need. You can contact us to get any materials you need.
Check Stock

WeldingCity 10-pcs TIG Welding Tungsten Electrode Tri-Element Non-Radioactive (Purple/AWS: EWG) 3/32\ x 7\ | 10-pk

  • 10-pk premium TIG welding Tungsten electrodes tri-element non-radioactive. Electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
  • AWS Classification: EWG (Purple). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed..
  • Mixed tri-oxides of Lanthanum, Zirconium and Yttrium with total rare earth composition around 1.5% - 1.8%.
  • Tungsten remains. Non-radioactive Tungsten electrodes.
  • excellent substitute for Thoriated Tungsten electrodes. Wide current range and low burn-off rate. Easy arc starts and good stability..
  • Package available: 10-pcs/box for each size of 0.040.
Check Stock

TIG Welding Tungsten Electrodes, 2% Lanthanated Tungsten Electrodes, 1/16\ x 7\

  • TIG welding Tungsten electrodes 2.0% Lanthanated (Blue WL20).
  • Good welding effect of stainless steel / iron / carbon steel.
  • Using DC welding, lower amperage required.
  • A pack of 10-pcs, vacuum packaging, not easy to oxidize.
Check Stock

TIG Welding Tungsten Electrodes 2% Thoriated Red Tig Tungsten Assorted, 5PCS 3/32'x 7' + 5PCS 1/16'

  • Premium 10 pack of assorted red WT20 2% thoriated tungsten electrodes for tig welding.
  • With reliable arc-striking and a low burn-off rate.
  • Electrode size: 3/32" x 7" or 2.4mm x 175mm AND 1/16" x 7" or 1.6mm x 175mm.
  • You get 5PCS 3/32"x 7" + 5PCS 1/16" 2% thoriated (Red) tungsten.
  • The tungsten rods can be very good operation even in high current range on DC.
Check Stock

WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod 2.0% Thoriated Red EWTh20 3/32 x 7 | 10-pcs

  • Pack of 10-pcs premium TIG welding Tungsten electrodes 2.0% Thoriated. AWS Classification: EW-Th2 (Red). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD..
  • Higher current range and stability. Better arc starts with lower tendency to spit. Medium erosion. Increased resistance to weld pool contamination..
  • Available Tungsten electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
  • 10-pcs/box Tungsten electrodes (2.0% Thoriated EW-Th2) with quantity discount. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod Pure Green EW-P 3/32 x 7 | 10-pcs

  • 10-pcs premium TIG welding Tungsten electrodes pure (Tungsten >99.5%). Electrode diameter available: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
  • AWS Classification: EW-P (Green). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed..
  • Better stability when used with alternating current. Lower current-carrying capacity and tends to spit at higher current. May balls easily. Low cost. Usually used for non-critical welds only..
  • 10-pcs/box Tungsten electrodes (Pure EW-P). With quantity discount. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

TOOLIOM TIG Welding Tungsten Electrode 2% Thoriated Tungsten 3/32'x 7' (Red, EWTh-2) 10-Pack

  • Electrode Size: 3/32" x 7" or 2.4mm x 175mm.
  • Material:2% Thoriated Tungsten (Red, EWTh-2) adhering AMERICAN Welding Society standard AWS A5.12M/A5.12:2009 conformance.
  • Performance:Good welding performance,long life and operate easily.
  • To be used on TOOLIOM TL-200T TIG Welder(High Frequency TIG Welding).
  • Package:Ten (10) pack of premium thoriated tungsten rods ,vacuumed sealed, no oxidation,long time preservation.
Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

  • ✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
  • ✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
  • ✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
  • ✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
  • ✅5 IN 1:Multi-purpose household and welding repair tool kit.
Check Stock

WeldingCity 10-pk Premium TIG Welding Tungsten Electrode 1/16'-3/32' x 7' ASSORTED ALLOYING Green-Red-Gray-Gold-Blue

  • Premium TIG welding Tungsten electrodes. Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD..
  • Available Tungsten alloying: 2.0% Thoriated (EW-Th2/Red), 1.5-1.8% mixed tri-oxides of Lanthanum, Zirconium and Yttrium (EWG/Purple, non-radioactive), 2.0% Lanthanated (EW-La2/Blue), 2.0% Ceriated (EW-Ce2/Gray), 1.5% Lanthanated (EW-La15/Gold) and Pure (EW-P/Green)..
  • Tungsten electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm) and 1/8" (3.2mm).
  • Packages available: 10-pcs electrodes of 0.040", 1/16", 3/32" and 1/8" with different alloying assortedly packed in one box. With quantity discount. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Sigma Bike Computer Originals BC 10.0 Wireless ATS 10 Functions incl Temperature Multi Day Tracking Large Display Weatherproof Long Battery Life Flexible Mounting Easy Installation Operation

  • 10 FUNCTIONS INCL TEMPERATURE: BC 10.0 WL bike computer displays trip distance, speed, total distance, trip time, clock, total trip time, average speed, average speed comparison, maximum speed, and current temperature. The wireless bike computer can be easily and intuitively operated with a button on its bottom edge. This makes it easy to switch between the functions, even during a ride. Its full text display can be in English, German, French, Italian, Spanish, Dutch, or Polish..
  • MAXIMUM SPEED & MULTI-DAY TOUR TRACKING: A special feature of the BC 10.0 WL is that it displays maximum speed as well as current and average speeds. This motivates cyclists to pedal faster to break their own speed records. The BC 10.0 WL measures trip time and distance for even long bike tours. This makes it convenient to read the entire distance of a multi-day biking trips..
  • WIRELESS DATA TRANSFER & PRE-DEFINED TIRE SIZES: The wireless (WL) encoded transmission SIGMA has developed eliminates the need for cables. A wireless transmitter on the fork continuously measures and transmits bicycle speed without interference to the BC 10.0 WL's receiver. The pre-defined tire sizes, ranging from a small child's bike to a 29" bike, make it easy to set the BC 10.0 WL. You can al....
Check Stock

2021 LightningMTS 275 AC/DC TIG with Pulse/MIG/Stick Welder Dual Voltage 110v/220v

  • 12 ft. Everlast 18 Series Water Cooled TIG torch with series 35 DINSE-style connector.
  • 10 ft. Series 36 MIG torch with Euro style quick connect fitting.
  • Stick electrode holder with 10 ft. cable and 35 series DINSE-style connector.
  • Work clamp with cable 10 ft. cable and 35 series DINSE-style connector.
  • Spare consumable starter kit (does not include tungsten).
Check Stock

HZXVOGEN MIG Welder 100V/220V 200Amp Weld Aluminum Wider LCD Display Smart Control IGBT Inverter MIG Stick TIG Mix Gases Gasless Flux Cored Solid Core Wire Welding Machine Model HBM2280

  • THE MOST ADVANCED MULTIFUNCTIONAL WELDER - HZXVOGEN HBM2280 MIG welder with wider LCD displayed, it is a smart control welder. It is super easy and....
  • CAN WELD ALUMINUM - This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB24 Mig....
  • MIG FUNCTION - 1. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 ~ 3.4mm thickness. When using 1.0mm....
  • TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten.When using 1.6mm tungsten can weld 0.7 ~ 4.8 thickness, using 2.4mm tungsten can weld 1.2 ~ 6.4mm....
  • MMA FUNCTION - Current 10 ~ 170 amp. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 ~3.4mm thickness. Using 4.0mm rods, can....
Check Stock