Categories

Best Wood Carving Burr

TianTac Tungsten Carbide Rotary Burr Set 10pcs Carving Burr Bits with 3mm Shank 6mm Bit for Wood & Stone Carving Steel Metal Working

  • Material: This carbide burr set/rotary bit set is made of premium tungsten Carbide steel which has long working life, Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Please check the size before you buy it..
  • Multi-Purpose: This rotary burr set includes everything you need for carving, engraving, polishing and removing sharp edges, being suitable for wood, stone carving, metal working and die grinders. The kit includes a massive selection of shapes for all types of cuts..
  • Great Processing Quality: with this burr set, the surface of your target is smooth after carving or engraving, therefore it can even process a variety of high-precision mold..
  • Those carbide burr rotary bit is generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute..
  • Full Customer Satisfaction, If you’re not 100% satisfied with your purchase, please get back to us, we will offer refund or replacement to make sure your full satisfaction..
Check Stock

K Kwokker Tungsten Carbide Burr Set 1/8 Shank Diamond Files HRA85 Rotary Tool Accessory Kit, Drill Chucks Accessories for Dremel Rotary Drill Air Die Grinder for Metal Polishing, Wood Carving

  • √ [1/8" Shank 1/4" Cutting Dia Carbide Rotary Burr Set] K Kwokker 10Pcs Carbide Die Grinder Bits. Shank dia: 3mm(1/8"), Cutting dia: 6mm(1/4"), fits dremel tool accessories and most small rotary tools. 10 different types of carving kit drill bits, meet your different needs..
  • √ [Hardness HRA85, Very Well Made And Tough As Nails, Nice Tungsten Carbide] Carbide burr set made of heat-treated durable carbide that lasts long working life, packed with nice plastic case for safety storage and protection..
  • √ [Safe And Efficient, Like a Hot Knife Thru Butter] VERY IMPORTANT: SINGLE-SLOT Tungsten carbide burrs drill bits, BEST FOR: Metal, cast iron, cast steel, carbon steel, alloy steel, stainless steel and so on.
  • GOOD FOR: wood, marble, jade, ceramic, glass etc. NOT FOR: EPOXY. PLEASE USE ROTARY BURR SET ON THE CORRECT MATERIAL TO AVOID DAMAGE TO THE PRODUCT DUE TO INCORRECT USE..
  • √ [This Is a Essential Rotary Burr Set] Grinding head for air die grinder. NOTE: When using the wood carving bits, make sure that the burr handle is fully inserted into the chuck and tightly clamped. Eye masks and gloves are reco....
Check Stock

HOMEIDOL Carbide Burr Set Die Grinder Bits Rotary Tool Bits 1/8 Shank 10 PC Double Cut Wood Carving Accessories Cutting Burrs Metal Grinding Engraving Polishing Porting Trimming

  • √【Material】Double cut carbide rotary burr set,tungsten carbide,can be used to process: iron, steel etc.. Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Total length: 45-50 mm( 1.77-2 inch).1/8” fits dremel tool, straight shank can be held by most rotary tool with three jaw chuck for accurate centering.Please check the size before you buy it..
  • √【Durable】Carbide rotary burr's packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns..
  • √【High efficiency and Practical】The rotary tools processing efficiency is higher than the manual file tool. 10 different types of carving kit drill bits, meet your different needs.No wear out after a long time use. The shaft will not bend at high speed..
  • √【Double Cut Design】 The double cut burr head groove lines of the head are crossed, produces a finer finish than single cut and reduces the size of the chips and slivers. It also gives greater tool control..
  • √【A Good Rotary tool】 A good choice of DIY carving, engraving, and polishing. Suitable for multiple types of rotating tools.Making DIY carving fans much easier to do the wood carving job.It is also an ideal gift for woodcarvers..
Check Stock

60 Grit 20Pcs

  • ★ 60 GRIT: #60 Grit Diamond Rotary Grinding set, rougher surface which are quicker than the larger grit burrs when Sanding, Polishing and Engraving..
  • ★ MULTI-PURPOSE: Diamond Grinding Head Burr uses on stone, glass, wood, tile, ceramics, marble, granite and other hard materials.
  • ★ MULTI-FUNCTION: GOXAWEE Diamond burr bits have 10 different grinding bits for abrasive, engraving, cutting, polishing, carving and etching.
  • ★ COMPATIBILIBY: Universal 3mm (1/8") shank grinding drill bits fit for GOXAWEE G4007, G4115, G5225 and most rotary tools or die grinders.
  • ★ EXQUISITE PACKAGING: 20Pcs Diamond rotary burr set of higher quality is orderly packed in a nice bag as shown, easy to place and carry.
Check Stock

5Pcs Premium Tungsten Steel Carbide Rotary Burr Set 1/4inch Shank Double Cut Carbide Burr Set 8MM Head Die Grinder Bits for Die Grinder Drill DIY Wood-Working Carving Metal Polishing Engraving

  • 【5Pcs Solid Carbide Burr Bits】The grinder drill set is made of tungsten carbide, high sharpness and good toughness, machining hardness up to HRC70, great for carving, polishing, drilling.
  • 【Metal Die Grinder Drill Bit】The rotary file is widely used for processing metal(include hardened steel) and non-metal( like wood, bone and marble), perfectly fits for die grinder and drill.
  • 【1/4” Shank Rotary Burr】Size: Shank-1/4inch(6mm), Tip Head-5/16inch(8mm), Total Length 58-65mm, Cutting Burr Shape: Ball, Round Nose, Pointed Tree, Cylinder with End Cut and Cylinder with Round Head.
  • 【Double Cut Head Design】The double burr can cut cleanly and quickly through hardened steel, with smoother surface and no dust pollution compared with grinding wheels or steel cutter.
  • 【Wide Applications】The tungsten grinding bits are widely used in woodworking carving, mold processing, burr cleaning and impeller polishing.
  • Plus package comes with plastic case for safety storage and protection.
Check Stock

SL-3 Tungsten Carbide Burr Rotary File Taper Shape with Radius End Double Cut with 1/4\Shank for Die Grinder Drill Bit

  • ...all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed being too slow. However, it's ideal to start the cutting slow, increasing the speed as you go along. High speeds will prevent clogging in the flutes of your burrs. The 1/8 carving burrs can bear the speed range of 6000-50000 revolutions per minute..
  • 【Widly Use】The 3mm and 6mm head diameter carbide cutting burrs set is widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, cylinder head porting and sculpting..
Check Stock

15 Pieces Wood Carving and Engraving Drill Bit Double Cut Carbide Rotary Burr Woodworking Drill Bits Set for DIY Woodworking Drilling Engraving Polishing Supplies

  • You will receive: the package contains 5 pieces wood carving and engraving drill bits and 10 pieces double cut carbide rotary burr, 15 pieces in....
  • Size details: wood carving tools have 5 sizes carving, 3 x 3 mm, 3 x 4 mm, 3 x 5 mm, 3 x 6 mm, 3 x 7 mm, 3 x 8 mm in shank and bit diameter.
  • Durable to use: the wood carving and engraving drill bits are made of high-speed steel, and the double cut carbide rotary burrs are made of tungsten....
  • Easy to use: the 1/8 inch handle fits most rotating tools, just install it like any other typical drill bit easily, will be your ideal choice for DIY....
  • Functional tools: our practical tool accessories provide you delicate fine processing, widely applied in metal, woodworking, model engineering,....
Check Stock

aTourer Tungsten Carbide Burr Set Rotary File Rasp 1/8 & 1/4 Cutting Head Die Grinder Milling Bit 20pcs Single Burr Double Cut 20pcs

  • ...all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed being too slow. However, it's ideal to start the cutting slow, increasing the speed as you go along. High speeds will prevent clogging in the flutes of your burrs. The 1/8 carving burrs can bear the speed range of 6000-50000 revolutions per minute..
  • 【Widly Use】The 3mm and 6mm head diameter carbide cutting burrs set is widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, cylinder head porting and sculpting..
Check Stock

AKCIAON Carbide Burr Set 20PC Rotary Grinder Burr Bits,1/8" Shank Die Grinder Bits,Professional Tungsten Double Cutting Burrs Compatible with Dremel Carbide Bits for Metal Carving Grinding Engraving…

  • ...are made of high quality tungsten carbide steel for long service life, extremely strong, good wear resistance.Die grinder bits will not easy wear after a long time of use. The shaft will not easy bend at high speed..
  • DOUBLE GROOVE DESIGN:AKCIAON double cut tungsten carbide carving bits are designed with double side, the groove lines od these carbide rotary burr's head are crossed.The surface of your target is smooth after carving or engraving, therefore it can even process a variety of high-precision mold..
  • DIFFERENT SHAPE MEET MULTI-PURPOSE:This rotary burr set includes everything you need for carving, drilling, engraving, polishing and removing sharp edges, being suitable for wood, plastic, aluminum, stone carving, metal working and die grinders.The rotary tool kit includes a massive selection of shapes for all types of cuts, with higher efficiency..
  • SMOOTH MILLINH CHIPS:No dust pollution, stable, reliable and high efficiency.It is mainly used on electric and pneumatic tools, and the speed is generally 25000-50000 rpm. When using, the tool should be clamped correctly, and the cutting mode should be reverse milling to avoi....
Check Stock

20 Pieces Wood Carving Drill Bit Set Includes HSS Engraving Drill Accessories Bit and HSS Carbide Wood Milling Burrs Universal Fitment for Rotary Tools, DIY Wooden Crafts

  • Package contains: you will receive 10 pieces wood carving and engraving drill accessories, as well as 10 pieces HSS carbide rotary burr bits in 10 shapes for faster wood removal, these practical tools help you make kinds of crafts without breaking the wood, and you can easily work with woods more efficiently while leaving a smoother finish.
  • Sturdy material: the three-pointed teeth are precisely centered, can achieve pointed and precise counter holes.
  • Three-sided arc surface can automatically and quickly discharge chips from the holes on the side.
  • These wood carving and engraving drill bits are made of high-speed steel material, strong and durable, not easy to break, good cutting force during use.
  • Size options: our carving drill bits are approx. 3.0 x 3.0 mm, 3 x 4 mm, 3 x 5 mm, 3 x 6 mm, 3 x 7 mm, 3 x 8 mm in shank and bit diameter, and the router is about 1.5 inch/ 39 mm long, the handle is about 3.0 mm in diameter.
  • Please allow a little error on the size due to manual measurement.
  • Using occasions: the shank is approx. 3.0 mm, which is compatible with most grinders and rotary tools, to help finish, grind and shape your work effectively, these tools are suitable for grinding, polishing, shaping and burnishing soft wood, plastics and rubber surfaces, als....
Check Stock

Carbide Burr Set Die Grinder Bits 20 Pcs 1/8 Shank Double Cut Tungsten Carbide Rotary Burrs Set Compatible with Dremel for Metal Carving Wood Working Engraving Polishing

  • 【PREMIUM QUALITY】These carbide burr sets are made of Tungsten Carbide steel which has long working life with high precision shape..
  • 【DOUBLE-CUT DESIGN】Double grooves die grinder bits are designed of crossed lines which make it more suitable for low density material like wood platics and aluminum with fast chip removal..
  • 【COMPATIBILITY】Universal size 1/8'' shank diameter, compatible with dremel bits and most rotary tools with three jaw chuck and 1/8" collet such as Air Tools, Die Grinders and so on..
  • 【MULTIPLE USES】These cutting burrs can work on wood metal plastic ceramic stone glass etc. 20 PCS burr set are ideal choices for your various DIY arts and crafts..
  • 【ADAPTABILITY】20 kinds of burr bits can meet different work such as engraving carving sculpturing polishing deburring grinding cutting milling cleaning porting..
Check Stock

Diamond Grinding Burr Bit Set，20Pcs Rotary Tool Accessories Stone Carving Set with 1/8 inch Shank for Stone Ceramic Glass Carving, Grinding, Polishing, Engraving, Sanding

  • 【Material】：#60 Grit Diamond -coated Grinding set, high hardness, uniform sand，rougher surface which are quicker than the larger grit burrs when sanding, carving and grinding, wear resistance..
  • 【Widely Use】: Diamond burr set used for precision sanding, grinding, sculpturing, dressing in rock, ceramic, glass, precious stone, agate stones and more, shaping the deadwood areas of bonsai trees, and carving hard agate stones etc..
  • 【3mm(1/8") shank】: Diamond grinding burr drill bits set fits for most drills, rotary tools or die grinders. High compatibility, easy change..
  • 【Great Gift for DIY Enthusiasts】: 10 Different Shapes diamond grinding burr bits, includes sphere, cone, cylinder, round head cylinder, bullet, etc, Rich in quantity and various shapes meet your many grinding and carving needs..
  • 【Quality Gurantee】: You will get 20 pcs diamond grinding bits packaged in a durable clear case. If any issues with quality, leave us a message and we will provide a 100% satisfactory solution soon or full refund..
Check Stock

Bestgle 4Pcs 6mm(1/4”) Shank Tungsten Carbide Rotary Cutting Burr Die Grinder Bit for DIY Woodworking, Metal Carving, Polishing, Engraving, Drilling, 150-160mm Length

  • Set of 4 Double Cut Solid Carbide Rotary Burr Set, Shank diameter: 6 mm(approach 1/4 inch), Cutting edge diameter: 7mm-10mm, Total length: 150-160 mm.
  • The service life of tungsten steel rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel.
  • High performance on processing Copper, Aluminum, Alloy, Iron, Marble, Jade, Steel, Glass, Wood and Plaster etc. machining hardness can reach to HRC70.
  • Generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute.
  • Excellent for fine detail work,widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding,ect.
Check Stock