Best Wood Fiber Cement Board

Tape Fiberglas Cement 3inx50ft

• Long-lasting, alkali-resistant mesh will withstand corrosive effects of the alkaline present in cement board joint finishing, lightweight concrete panel seaming and crack repair, block foundation, and reinforcement for fiber cement, and concrete stucco. Heavier fiberglass yarns for more strength than regular mesh tapes..

cSeao 20 Pieces 3/16-24 x 2 Drywall Toggle Anchors Bolts Wing Nuts for Heavy Duty Drywall Ceiling TV Zinc Plated

• - Product name: Drywall Toggle Anchors Bolts wing Nuts Kit.
• - Can be used for a wide range of hollow wall and mounting parts thickness, product suitability.
• - Fold the expansion arm to insert the hole, no need to unscrew the screw, the installation is simple, the expansion arm automatically spreads behind the hollow substrate, forming a large radius and large area contact, providing a reliable anchoring effect.
• - Easy to install with a regular Phillips screwdriver.
• - suitable for installing lamps / curtain rods / photo frames / coat racks / power switches and other light-loaded objects Can be used for hollow brick / gypsum board / cement fiber board / wood board and other hollow substrates.

Masonry & Stucco Paint, Beige, 1 gal.

• Price For: Each Coverage: 200 to 300 sq. ft./gal. Finish: Semi-Gloss Dry Time Recoat: 4 hr. Item: Exterior Paint Application Method: Brush, Roll, Spray Size: 1 gal. Green Environmental Attribute: VOC Levels Meet SCAQMD Requirements.
• Surface: Interior and Exterior Use on Masonry, Brick, Cement, Concrete Block, Cinder Block, Stucco, Wood, Hardboard, Aluminum, Fiber Board, Vinyl Siding or Trim, Plaster, New or Coated Acoustic Ceiling, and Previously Painted or Primed Metal Dry Time: 30 min. Paint Color Family: Beiges VOC Content: 15g/L Color: Beige Country of Origin (subject to change): United States.

Masonry & Stucco Paint, Black, 1 gal.

• Price For: Each Coverage: 200 to 300 sq. ft./gal. Finish: Semi-Gloss Dry Time Recoat: 4 hr. Item: Exterior Paint Application Method: Brush, Roll, Spray Size: 1 gal. Green Environmental Attribute: VOC Levels Meet SCAQMD Requirements.
• Surface: Interior and Exterior Use on Masonry, Brick, Cement, Concrete Block, Cinder Block, Stucco, Wood, Hardboard, Aluminum, Fiber Board, Vinyl Siding or Trim, Plaster, New or Coated Acoustic Ceiling, and Previously Painted or Primed Metal Dry Time: 30 min. Paint Color Family: Blacks VOC Content: 16g/L Color: Black Country of Origin (subject to change): United States.

EAB Tool 2100007 13' Laminate Floor Cutter with Installation Kit

• BONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8″). will also cut vinyl tile and fiber cement siding such as hardy plank..
• Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8″). will also cut fiber cement siding such as hardy plank.
• Angle gauge allows for cuts up to 45 degrees.
• Quiet, dust free operation, No electricity required.

EAB Tool Exchange-a-Blade 2100005 9-Inch Laminate Flooring Cutter

• BONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8"). will also cut vinyl tile and fiber cement siding such as hardy plank..
• Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8"). will also cut fiber cement siding such as hardier plank.
• Angle gauge allows for cuts up to 45 degrees.

48 Pieces Heavy Duty Toggle Bolts, Wall Anchors & Screws for Drywall, 1/4 Inch, 1/8 Inch, 3/16 Inch (3 Sizes)

• Screws and Drywall Anchors Heavy Duty: These anchors and screws can be used on hollow brick, gypsum board, cement fiber board, wood board, and other hollow materials.
• Perfect For: The heavy duty drywall anchors and screws can be used to install lighting fixtures, curtain rods, and photo frames.
• 3 Sizes: The largest drywall anchor screw measures 1/4 x 3 inches, the medium size measures 3/16 x 3 inches, and the smallest measures 1/8 x 2 inches.
• Durable Material: These toggle bolts and anchors are made with a plated carbon steel and coating which is perfect for hanging heavy items on drywall such as coat racks and flower pot..
• What’s Included: This set includes 24 of 1/8 inch wall anchors.

cSeao 22 Pieces Heavy Duty Drywall Ceiling TV Anchors Toggle Bolt Assortment Kit, 1/8\ 1/4\ 3/16\ Spring Loaded Hollow Wall Inserted Bolt Wing Nuts

• - Product name: Spring Ceiling TV Anchors Bolts wing Nuts Kit.
• - Can be used for a wide range of hollow wall and mounting parts thickness, product suitability.
• - Easy to install with a regular Phillips screwdriver.
• - Fold the expansion arm to insert the hole, no need to unscrew the screw, the installation is simple, the expansion arm automatically spreads behind the hollow substrate, forming a large radius and large area contact, providing a reliable anchoring effect.
• - suitable for installing lamps / curtain rods / photo frames / coat racks / power switches and other light-loaded objects Can be used for hollow brick / gypsum board / cement fiber board / wood board and other hollow substrates.

HLOFIZI 6 Inch Hole Saw Tungsten Carbide Tipped for Recessed Lights, Drilling Metal, Hardwood, Nail-Embedded Wood, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

• Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 6” bi-metal hole saw.
• Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass. Also Ideal for recessed lights.
• Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
• Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
• 100% SATISFACTION GURANTEED: If you are dissatisfied with our 6 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.

5 X 6 FIBER CEMENT BLADE CARDED

EAB Tool 2100010 EAB Tool Professional Floor Cutter, 13", Black

• Bonus installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8"). will also cut vinyl tile and fiber cement siding such as hardy plank..
• Cuts laminate flooring, wood flooring and engineered flooring up to 15 mm (5/8"), vinyl tile, pressboard siding and fiber cement siding such as hardier plank.
• Angle gauge allows for cuts up to 45 degrees.
• Quiet, dust free operation, No electricity required.Replaceable blade 2100011 can be re-sharpened with included sharpening stone.Installation Kit: tapping block, Wedge SPACER, pull bar and double-sided honing stone.Ships to the US only.Professional level.

HLOFIZI 1-3/8 Inch Hole Saw (35 MM) with Tungsten Carbide Tipped for Drilling Metal, Hardwood, Nail-Embedded Wood, Stainless Steel, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

• Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 1-3/8” bi-metal hole saw.
• Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass and more.
• Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
• Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
• 100% SATISFACTION GURANTEED: If you are dissatisfied with our 1-3/8 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.

Ships Within 1 Biz Day from NV - Blue Boar Recessed Light Carbide Grit Hole Saw 6-3/8” Dia for 6 inch Lights: Fast Cutting in Drywall, Lath & Plaster, Hardi Board

• 1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials.
• Continuous cutting edge for smooth cutting even in wood lath and plaster.
• Cuts through drywall, plaster (NO Concrete), CornHole board, fiber cement Hardie board, acoustical tile, ceiling tile.
• Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro HP1156 Large shield and Arbor kit for straight cuts.
• SHIPS WITHIN 1 BUSINESS DAY FROM OUR NV WAREHOUSE.